Washer Motor Rotor Position Sensor 6501KW2002A

The part for perfectly and works like a champ. This is an easy fix.

I had an LE error appear on our washer. After research this appeared to most often be the reason. Ordering and delivery were as expected. Installation wasn’t difficult if you have the tools. No complaints.

Washer was not spinning and threw LE code this and the wiring harness fixed it fast!

It was easy to install and worked perfectly to repair my washer at a much lower cost than having a repair guy come out. And the delivery was quick.

I was able to replace this part after viewing a few videos on Youtube. It took longer thank shown on videos because center bolt holding motor cover in place was difficult to remove. I ultimately had to hit the handle of my socket wrench with a hammer to get the bolt to loosen. Even after removing the bolt, it was difficult to remove the cover because of the magnets. In the end, I was able to replace the part and saved a lot of money.

LE code directed me to possible solutions. Internet video showed me step by step repair. I was fortunate to have and impact driver to remove the nuts. It would have been nearly impossible with an ordinary socket wrench. Extra time needed was for gathering the right tools. Washer spins again!

Parts are installed at the bottom of the washer hence I had to drain all water and lay washer on the side before removing old parts and install new one.

Nice and easy parts to install 20min and done.working better than before.