Kenmore 10654619300 refrigerator Parts

On Kenmore side-by-side refrigerator model 10654619300, the model and serial number label is located inside the refrigerator compartment on an inside wall. Use that label to record the full model number and serial number for parts lookup and service.

Where to look (fast checklist)

• Open the fresh food (refrigerator) door, not the freezer door
• Check the inside side walls of the refrigerator compartment
• Look near the upper side wall area first, then scan downward
• Check around the crisper drawer area if you do not see it up high
• Use a flashlight; the label can be easy to miss against light-colored liners

What you should write down

Record these items exactly as shown on the label:

• Model number (for this unit, it will show 10654619300)
• Serial number
• Purchase date (if you still have it)

You can also confirm the wording and “product record” section in the 10654619300 owner's manual.

Why it matters

The model number and serial number identify the exact configuration of your Kenmore refrigerator (doors, dispenser setup, ice maker, and water filter system). That ensures you match the correct replacement parts, such as a water filter or ice maker assembly, the first time.

Common label locations (quick comparison)

Appliance area	Likelihood for model/serial label	Notes
Inside refrigerator compartment side wall	High	Primary location for this model line
Inside freezer compartment	Medium	Some models place it here, but check fresh food side first
Back exterior near compressor	Low	More common for tech data stickers than consumer model labels

Last updated: February 2026

The exact cabinet dimensions for the Kenmore 10654619300 Elite refrigerator are listed in the specifications section of the 10654619300 owner's manual. For installation planning, we also follow the manual’s clearance guidance so the doors swing fully and the unit ventilates correctly.

Where to find the exact dimensions

Check the specifications pages in the 10654619300 owner's manual. That section typically lists:

• Overall width, height, and depth (cabinet)
• Depth with doors and handles (if applicable)
• Required cutout or opening recommendations (if built-in style is referenced)
• Door swing clearance notes
• Water line connection space behind the unit (ice maker models)

Installation clearances we use for this model

The manual for this Kenmore side-by-side calls out ventilation and door-swing spacing that matters just as much as the cabinet size:

• Allow 1/2 inch of space on each side and at the top for ventilation
• If installed next to a fixed wall, leave at least 2 inches on the wall side (depending on your setup) so the door can swing open
• If the refrigerator has an ice maker, allow extra space at the back for the water line connection
• Avoid installing near heat sources (oven, radiator)
• Do not install where temperatures fall below 55°F (13°C)

Quick planning checklist (before you measure the opening)

• Measure the opening width at the front and back
• Measure height to the lowest cabinet or soffit
• Measure depth to the wall, then account for baseboard trim
• Confirm you can remove doors or handles if needed for moving
• Plan a path from the entry door to the kitchen (tight turns matter)

Dimension types (what they mean)

Dimension type	What it includes	Why it matters
Cabinet width/height/depth	Main box	Fit into the opening
Depth with doors	Doors closed	Affects how far it sticks out
Depth with handles	Handles installed	Often the tightest depth constraint
Door swing clearance	Space beside unit	Prevents door from hitting a wall

Why it matters

A refrigerator can physically fit the opening but still be a problem if it cannot ventilate or the doors cannot open fully. Using the manual’s clearance requirements helps prevent poor cooling performance, ice maker water line kinks, and door seal wear.

Last updated: February 2026

Kenmore refrigerators typically last 12 to 15 years. With consistent care (clean condenser coils, good door seals, stable temperatures), many units reach 15 to 20 years. For your Kenmore 10654619300 side-by-side, following the care and cleaning guidance in the owner's manual helps maximize service life.

Typical lifespan ranges (what to expect)

Most household refrigerators fall into these practical ranges:

• 12 to 15 years: common average lifespan
• 15 to 20 years: achievable with strong maintenance and normal use
• 10 to 12 years: more likely with heavy use, poor airflow, or neglected cleaning
• 20+ years: possible, usually with excellent upkeep and timely repairs

Quick reference table

Condition	What you’ll usually see	Expected lifespan
Normal use + basic maintenance	Stable temps, minor repairs	12 to 15 years
Great maintenance	Clean coils, tight gaskets, good airflow	15 to 20 years
Poor maintenance or harsh conditions	Warm temps, long run times, icing issues	10 to 12 years

What most affects refrigerator life

These factors make the biggest difference on Kenmore side-by-side models like 10654619300:

• Condenser coil cleanliness (dirty coils drive longer run times)
• Door gasket condition and cleanliness (air leaks force constant cooling)
• Leveling and door alignment (helps doors close fully and reduces gasket wear)
• Airflow inside the compartments (overpacking blocks vents)
• Water and ice system health (leaks and slow fill can lead to secondary problems)

Why it matters

A refrigerator that runs longer than it should (from dirty coils, leaky gaskets, or poor airflow) wears out key components faster, including the compressor and fans. Simple preventive maintenance reduces run time, stabilizes temperatures, and extends overall lifespan.

Maintenance that pays off most

We recommend these high-impact habits:

• Clean condenser coils on a regular schedule
• Wipe and clean door gaskets so they seal without sticking
• Keep the refrigerator level so doors self-close properly
• Maintain consistent settings (avoid frequent temperature changes)
• Replace the water filter on schedule if your unit uses one (for example, refrigerator filter EDR5RXD1)

Last updated: February 2026

For Kenmore model 10654619300, the serial number on the inside wall of the fresh food compartment identifies when the refrigerator was manufactured. Use the serial number format and date code chart in the 10654619300 owner's manual to match the first characters of the serial number to the month and year.

Where to find the serial number

We use the model and serial number label inside the refrigerator compartment (fresh food section). Check:

• The inside side wall near the top front
• The wall behind the crisper drawers
• The ceiling area inside the fresh food compartment
• The label that lists both model 10654619300 and the serial number

How to decode the age from the serial number

Most Kenmore refrigerators use a serial number that includes a date code (often at the beginning of the serial). Once you have the serial number:

• Write it down exactly as shown (letters and numbers)
• Identify the leading characters used as the date code
• Match those characters to the month and year using the manual’s chart
• Record the result in your product records for future service and parts lookup

Quick reference table (what you are looking for)

What you need	Where it is	Why it helps
Serial number	Model/serial label inside fresh food compartment	Contains the manufacturing date code
Model number (10654619300)	Same label	Ensures you use the correct decoding chart
Purchase date (if known)	Receipt or product record	Helps estimate service life and warranty timing

Why it matters

Knowing the manufacture month and year helps us choose the correct Kenmore-compatible parts (like a water filter, ice maker, or inlet valve) and speeds up troubleshooting when you use the model and serial number together.

Related maintenance tip

If you are already checking the label, it is a good time to confirm your filter type and replacement interval. Our guide, how to replace the water filter in a Kenmore refrigerator, walks through common Kenmore filter setups and replacement steps.

Last updated: February 2026

The cubic-foot capacity for Kenmore model 10654619300 is listed in the specifications information for that exact unit. The quickest way to get the correct number is to check the specs section in the 10654619300 owner's manual and compare it to the model and serial label inside the fresh food compartment.

Where to find the capacity

Use these two places; they match your exact configuration.

• Check the model and serial label inside the refrigerator (fresh food) section
• Look in the specifications section of the 10654619300 owner's manual
• If your unit has an in-door ice bin and dispenser, remember usable space is less than total capacity
• If shelves or bins have been changed, total capacity stays the same but storage layout changes

Typical capacity range for this style

Most Kenmore side-by-side refrigerators in the 106 series fall into a common total-capacity range; use this only for planning until you confirm the exact spec for 10654619300.

Refrigerator type	Typical total capacity range	Notes
Side-by-side (Kenmore 106 series)	20 to 26 cu. ft.	In-door ice and water features reduce usable space

Why it matters

Knowing the correct cubic-foot rating helps when you are comparing replacement units, planning food storage, and choosing organization parts that fit your door and shelf layout (for example, a refrigerator cantilever bin WPW10160952).

Last updated: February 2026