Kenmore Elite 10657713703 side-by-side refrigerator Parts

Most Kenmore Elite refrigerators average 10 to 15 years of service life with normal household use. For the Kenmore Elite side-by-side refrigerator model 10657713703, regular maintenance (airflow, door sealing, and water system care) is what most often determines whether it lands closer to 10 years or closer to 15.

What affects lifespan the most

• Condenser coil cleanliness: dirty coils make the compressor run hotter and longer.
• Door gasket condition: air leaks cause longer run times and frost issues.
• Air circulation: blocked vents reduce cooling performance (the manual calls out ensuring proper air circulation).
• Defrost system health: a weak heater or thermostat can lead to ice buildup and warm temps.
• Water and ice system upkeep: timely filter changes help protect the dispenser and ice maker.

Typical lifespan by major system

System	Typical lifespan impact	What you may notice first
Sealed refrigeration system (compressor, evaporator, condenser)	Biggest driver of end-of-life decisions	Warm refrigerator, long run times, clicking, poor cooling
Defrost system	Medium	Frost on freezer back wall, fan noise changes, warming
Ice maker and dispenser	Medium	No ice, small cubes, dispenser not dispensing
Door sealing and hinges	Medium	Moisture, frost, doors not closing smoothly

Maintenance that helps you reach the high end (15 years)

• Vacuum dust from the condenser area regularly (often every 6 to 12 months).
• Keep food packages from blocking interior vents so air can circulate.
• Clean and inspect door gaskets; replace if torn, warped, or not sealing.
• Replace the water filter on schedule; for this model’s base grille filter, a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.
• Follow the water system setup and flushing steps in the 10657713703 owner's manual after filter changes or water line work.

Why it matters

A side-by-side refrigerator can keep running for years with minor part replacements, but poor airflow, weak door sealing, and neglected cleaning can shorten compressor life and increase energy use long before the refrigerator fully fails.

Last updated: January 2026

Kenmore Elite is a premium Kenmore product line that began in the late 1990s; your specific Kenmore Elite side-by-side refrigerator model 10657713703 was manufactured in a particular year based on its serial number, not the Elite name itself. For the exact build date, use the serial number decoding steps in the 10657713703 owner's manual.

How to find the manufacture year for model 10657713703

We use the refrigerator’s serial number (not the model number) to determine the build week and year.

• Look for the model and serial tag inside the fresh food compartment (often on a side wall or ceiling area).
• If you do not see it inside, check the cabinet frame near the door hinge area.
• Write down the full serial number exactly as shown.
• Use the serial number format guidance in the manual to decode the date.
• If the tag is damaged or missing, a technician can often identify the production range using the unit’s component IDs.

Quick timeline: “Kenmore Elite” vs your refrigerator’s age

The Elite name tells you the product tier; the serial number tells you the actual year it was built.

What you are trying to date	What to use	What it tells you
Kenmore Elite product line	Brand history	When the Elite line was introduced
Model 10657713703	Model number	The design family and configuration
Your exact refrigerator	Serial number	The specific manufacture week and year

Why it matters

Knowing the manufacture year helps us match the correct replacement parts and revisions for your refrigerator, especially for items that change over time such as the ice maker, control board, and water filtration components.

If you are also trying to match the correct water filter for this refrigerator, the base grille filter used on many Kenmore Elite side-by-side models is commonly referenced as part #9030 in the manual; the matching replacement on this model’s parts list is the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026

For Kenmore Elite refrigerator model 10657713703, the exact cubic-foot capacity is listed on the model’s rating label and in the specifications section of the 10657713703 owner's manual. Use those specs to match the correct storage capacity for your kitchen layout and food needs.

How to find the capacity on the refrigerator

Look for the model and serial tag (rating label) and then match the capacity to the specs.

• Check the inside wall of the fresh food compartment (often near the top or side wall)
• Check the inside wall of the freezer compartment
• Check behind the base grille area (on some side-by-side designs)
• Write down the full model number 10657713703 and the serial number
• Compare the listed “total capacity” to the manual specifications

What “cubic feet” means (and what it includes)

Cubic feet is the total interior volume of the refrigerator and freezer compartments combined. It is not the same as usable shelf space because bins, shelves, the ice maker, and air ducts reduce usable room.

Capacity term	What it usually refers to	Why it can look different
Total capacity	Refrigerator + freezer volume	Includes areas you cannot fully pack
Refrigerator capacity	Fresh food section only	Shelves and ducts reduce usable space
Freezer capacity	Freezer section only	Ice maker and bins reduce usable space

Quick checks if you are comparing to another refrigerator

When you are shopping or comparing specs, these details help you match “like for like.”

• Standard-depth vs. counter-depth changes usable space and exterior size
• In-door ice and water typically reduces door bin space
• A clogged water filter can reduce dispenser flow but does not change capacity; replace the genuine Kenmore refrigerator water filter EDR3RXD1 on schedule

Why it matters

Knowing the correct cubic-foot capacity helps you compare refrigerators accurately, plan shelf and bin organization, and avoid buying accessories (like bins and filters) that do not match your exact Kenmore Elite configuration.

Last updated: January 2026

Common problems on the Kenmore Elite side-by-side refrigerator model 10657713703 include weak or warm cooling, frost buildup or moisture issues, and ice or water dispenser troubles. Many fixes start with basic airflow, cleaning, and checking the defrost and fan systems; our 10657713703 owner's manual covers normal operation and troubleshooting.

Most common symptoms and what they usually point to

• Not cooling well: dirty condenser coils, restricted airflow, evaporator fan issue, or sealed-system trouble
• Frost or ice buildup (freezer back wall, vents): defrost heater, defrost thermostat, or door seal problems
• Water leaking (inside or under unit): clogged defrost drain, loose water line, or filter housing issues
• No ice or slow ice production: water supply problem, clogged filter, ice maker fault, or freezer too warm
• Noisy operation: normal operating sounds, fan blade rubbing ice, or compressor start components

Quick checks we recommend before replacing parts

1. Confirm airflow: do not block vents; allow space for air circulation.
2. Clean condenser coils: dust buildup commonly causes warm temps and long run times.
3. Check door sealing: look for gaps, torn gasket, or doors not closing fully.
4. Verify freezer temperature: ice makers typically need the freezer cold enough to cycle consistently.
5. Inspect for frost patterns: heavy frost often signals a defrost system issue.

Parts that commonly solve these problems (when symptoms match)

Symptom	Common suspect part	Example for this model
Frost buildup, warm freezer	Defrost heater or defrost thermostat	Refrigerator defrost heater WP2323198, refrigerator bi-metal thermostat WPW10225581
Warm temps, poor circulation	Evaporator fan motor or fan blade	Refrigerator evaporator fan motor WP2315549, refrigerator evaporator fan blade WP2169142
No ice	Ice maker assembly	Refrigerator ice maker 2198597
Slow water flow	Water filter	Genuine Kenmore refrigerator water filter EDR3RXD1

Why it matters

Cooling, defrost, and ice/water systems are connected. A simple airflow restriction or a clogged filter can look like a major failure, while a defrost problem can quietly reduce cooling until food starts warming.

Last updated: January 2026