Kenmore Elite 59677592802 refrigerator Parts

To reset the freezer on your Kenmore Elite refrigerator model 59677592802, we recommend doing a control reset first (exit special modes and return temperatures to normal), then doing a power reset by unplugging the refrigerator for a few minutes and restoring power. See the owner's manual for the exact control steps.

Quick reset options (start here)

• Exit special cooling modes: If Grocery Savor or Acceler-Ice is on, press that touch pad again to return to the normal set point.
• Restore control panel lights: Press and hold Door Ajar for 3 seconds to restore lights (helpful if Sabbath Mode was enabled).
• Power reset: Unplug the refrigerator (or switch off the breaker) for 2 to 5 minutes, then restore power.
• Confirm doors are closed: A door left open can trigger alarms and affect cooling.

Control panel reset steps (model 59677592802)

Use these steps when the display is acting odd, alarms are stuck, or temperatures will not adjust:

1. Press and hold Door Ajar for 3 seconds to access the User Preferences menu.
2. Use the Freezer Up/Down arrows to scroll preferences.
3. Use the Refrigerator Up/Down arrows to change a setting (for example, alarms ON/OFF, °F/°C, Sabbath Mode ON/OFF).
4. Press and hold Door Ajar for 3 seconds to save and exit.

What each reset method fixes

Reset method	Best for	What to expect
Exit Grocery Savor / Acceler-Ice	Temps locked at “coldest”	Temps return to normal set points; adjustments work again
User Preferences reset	Alarms, display settings, Sabbath Mode	Lights and tones return (depending on settings)
Power reset	Control board glitches	Display reboots; cooling resumes after a short delay

Why it matters

A “reset” on this Kenmore Elite model usually means returning the control system to normal operation. Special modes like Grocery Savor (about 12 hours) and Acceler-Ice (about 24 hours) can temporarily prevent temperature adjustments, which can look like the freezer is not responding.

Parts that can be involved if problems continue

If the freezer still will not cool properly after a reset, these model-matched parts are commonly involved in cooling and airflow issues:

• Refrigerator evaporator fan motor W11024089 (moves cold air through the compartments)
• Refrigerator electronic control WPW10317076 (manages temperatures and system operation)
• Refrigerator run capacitor WPW10662129 (helps the compressor start and run)

For ordering replacement parts for model 59677592802, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

Common problems on Kenmore Elite refrigerators like model 59677592802 are weak or uneven cooling, ice maker or water dispenser trouble, water leaks, and door sealing issues. Most fixes start with basic checks (power, controls, airflow, cleaning) before moving to parts like fans, valves, or controls.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: blocked air vents, dirty condenser coils, evaporator fan not running, defrost problem, or a failing compressor
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker failure, or freezer temperature too warm
• Water leaking or puddles: clogged/iced drain system, loose water line connection, or a water inlet valve seep
• Noisy operation: normal valve and fan sounds, or a worn evaporator fan motor/blade
• Lights not working when door opens: door switch issue

Quick checks we recommend first (fast, no parts)

Use the troubleshooting and control information in the owner's manual.

• Confirm the refrigerator is plugged into a grounded 3-prong outlet and the breaker is not tripped
• Make sure the controls are turned on and set correctly
• After a new install or major change, allow 24 hours for temperatures to stabilize
• Keep vents clear inside both compartments so air can circulate
• Listen for fan operation; a stalled fan often causes warm spots and odd noises

Parts that commonly solve these problems on 59677592802

If symptoms point to a failed component, these model-matched parts are common fixes:

Symptom	Common part to check/replace	Example from this model’s parts list
Warm fridge/freezer, poor airflow	Evaporator fan motor or blade	Refrigerator evaporator motor W11024089, refrigerator evaporator fan blade WP2169142
No ice or slow ice	Ice maker or water inlet valve	Refrigerator ice maker D7824706Q, refrigerator water inlet valve assembly WP12544124
Water under fridge or in freezer	Drain tube	Refrigerator drain tube W10619951
Temps erratic, controls acting up	Electronic control board	Refrigerator electronic control WPW10317076

Why it matters

Cooling, ice, and leak complaints often share the same root causes: restricted airflow, water supply problems, or a failing fan/control. Catching the cause early helps prevent food spoilage, ice buildup, and water damage.

For ordering, we recommend using the parts list for model 59677592802 first; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 10 to 15 years with normal household use; consistent cleaning, correct temperatures, and timely replacement of wear items (like filters and door gaskets) help you reach the high end of that range. For model-specific care guidance for Kenmore 59677592802, use the owner's manual.

Typical lifespan and what affects it

Most bottom-mount refrigerators like the Kenmore 59677592802 land in the same general life-expectancy window; the biggest differences come from maintenance and operating conditions.

• Door seal condition (air leaks make the compressor run longer)
• Condenser and airflow cleanliness (dust and pet hair raise operating temps)
• Ice maker and water system health (valves, filters, and supply pressure)
• Stable temperatures (avoid frequent warm-ups from propped doors)
• Power interruptions (surges and repeated restarts add wear)

Maintenance that most improves longevity

These steps reduce run time on the compressor and help prevent common cooling and moisture problems.

• Keep refrigerator at 37°F to 40°F and freezer at 0°F to 5°F
• Clean spills and wipe door seals regularly so they seat fully
• Replace water filtration parts on schedule; clogged filtration can reduce flow and strain the water system
• If you see water under the refrigerator, address drain issues early (a blocked drain can lead to icing and airflow problems)
• If cooling seems uneven, check for evaporator fan symptoms (noise, warm fridge, frost buildup)

Parts that commonly impact lifespan (and when to consider them)

If performance drops, these model-compatible parts are common fixes that can extend service life.

Symptom	Common cause	Example part for this model
Warm refrigerator, freezer OK	Weak airflow across evaporator	Refrigerator evaporator motor W11024089
Frost, moisture, or warm spots near door	Door not sealing	Refrigerator door gasket (white) W10443319
No ice or slow ice production	Ice maker issue	Refrigerator ice maker D7824706Q
Water dispenser slow or no water to ice maker	Valve not opening fully	Refrigerator water inlet valve assembly WP12544124

Why it matters

A refrigerator that runs longer to hold temperature wears out key components faster (especially the compressor and fans). Simple upkeep and replacing wear items early often costs less than running the unit in a stressed, overheated, or leaky condition.

If you decide to repair, you can order replacement parts for Kenmore 59677592802 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

The exact cubic-foot capacity for Kenmore Elite model 59677592802 is not listed in the manual excerpts we have for this model series. Most Kenmore bottom-mount refrigerators in the 596.7759 family are typically in the 20 to 23 cu. ft. range; we recommend confirming the exact capacity in the 59677592802 owner's manual.

How to confirm the exact capacity (best options)

• Check the specifications section in the 59677592802 owner's manual.
• Look for the model and serial tag inside the fresh food compartment; it sometimes lists capacity.
• If your unit has a product data sheet stored behind the toe grille or inside a cabinet panel, it often lists total capacity.
• Compare your exact configuration (ice maker, dispenser, door style) because features can change usable space.

Typical capacity guidance for this model family

For Kenmore Elite bottom-mount refrigerators like 596.7759_801, 596.7759_802, 596.7759_803, capacity usually falls into a narrow band.

What you may see	What it usually means
20 to 23 cu. ft.	Common total capacity range for many bottom-mount designs
Larger number	Often a wider cabinet or different platform
Smaller number	Often a more compact cabinet or different door configuration

Why it matters

Cubic-foot capacity helps when you are comparing replacement refrigerators, planning kitchen fit, and estimating storage space. It does not change which replacement parts fit; parts compatibility is based on the model number 59677592802.

Related parts and features that affect usable space

While capacity is a fixed spec, these items can affect how much you can practically store:

• Ice maker size and bin space (example replacement: refrigerator ice maker D7824706Q)
• Door gasket condition (air leaks reduce cooling performance and can lead to frost)
• Shelf and basket layout (fresh food shelves and freezer baskets)

If you are shopping for replacement parts for your 59677592802, we list model-matched parts on this page, and you can also search by model on Sears PartsDirect.

Last updated: February 2026