Haier Dryer Parts — Browse All Models

Troubleshooting common Haier dryer problems

Dryer doesn’t heat

If your Haier dryer runs but doesn’t produce heat, a burned-out element may be the issue. You can replace the heating element if it no longer generates heat during the cycle. In some cases, a tripped high-limit thermostat or blown thermal fuse could also cause heating failure.

Drum turns but dryer won’t start

A faulty start circuit can prevent the dryer from running, even when the door is closed and settings are correct. A common culprit is the start switch. Replacing the dryer door switch can often restore normal function.

Loud thumping or squealing sounds

Unusual noises during drying often point to worn components. A damaged drum support roller can cause rhythmic thumping, while squealing may indicate a failing idler pulley or motor bearings.

Drum won’t spin

If the motor hums but the drum doesn’t rotate, it could be a seized or failed motor. You may need to replace the dryer’s drive motor to restore full operation.

Commonly replaced Haier dryer parts

• Thermal fuse – This safety component cuts power to the heating system if the dryer overheats. A blown fuse can stop the dryer from heating or running at all.
• Timer – Controls cycle length and progression. If your dryer won’t advance through cycles or shuts off too soon, a failed timer might be to blame.
• Blower wheel – Moves heated air through the drum and out the vent. A cracked or clogged blower wheel can reduce airflow and cause long dry times.
• Lint filter – Captures lint from each load. A torn or missing filter can lead to clogged vents and reduced efficiency.

Why use OEM Haier dryer parts from Sears PartsDirect?

Only genuine OEM parts guarantee a proper fit and long-lasting performance. Sears PartsDirect makes it easy to match the right components to your Haier dryer model. Plus, our diagrams, how-to guides, and troubleshooting support are built to help you make repairs with confidence.

Haier dryer FAQs

Do Haier dryers have a reset button?

Most Haier dryers don’t have a dedicated reset button. If your dryer won’t start, unplug it for 1 to 5 minutes to reset the electronic control board, then plug it back in and try again.

Why does my Haier dryer stop mid-cycle?

This could point to overheating or a faulty thermostat. Check for lint buildup in the vent, and ensure the dryer is on a dedicated electrical circuit to prevent interruptions.

How do I find my Haier dryer model number?

The model number label is typically located inside the dryer door frame or on the back of the cabinet. Enter this number in our search bar to view compatible parts and diagrams.

What maintenance should I do on a Haier dryer?

Clean the lint screen after every load and inspect the vent hose monthly. Periodic deep cleaning of the vent system and interior cabinet can prevent overheating and improve efficiency.