Whirlpool ED22PBXBW01 refrigerator Parts

On your Whirlpool ED22PBXBW01 side-by-side refrigerator, the model number is typically on a rating label inside the fresh food (refrigerator) compartment, most often on the left interior wall near the top or around the crisper area.

• Open the refrigerator (fresh food) door and look along the left interior wall
• Check near the crisper drawers and the side wall just above them
• Look along the ceiling area inside the fresh food compartment
• Check the door frame (hinge side) where the door seals against the cabinet
• If you do not see it in the fresh food section, check inside the freezer compartment on a side wall

The rating label usually includes:

• Model number (for example, ED22PBXBW01)
• Serial number
• Electrical information (volts/amps)
• Sometimes a bar code

The exact model number ensures you get the right Whirlpool replacement parts for your refrigerator, especially for model-specific items like an ice maker assembly - refrigerator ice maker by Whirlpool 4317943, a refrigerator thermostat WP2198202, or a refrigerator inlet valve 4318046.

Last updated: February 2026

In a Whirlpool side-by-side refrigerator like model ED22PBXBW01, the most commonly replaced parts are the ones that affect cooling, ice and water dispensing, and door sealing. Typical repeat replacements include the ice maker, water inlet valve, defrost parts, thermostat, and door gaskets.

• Door gasket: Keeps warm air out; a bad seal causes sweating, frost, and temperature swings.
• Ice maker and ice system parts: Stops ice production or causes clumping and jams.
• Water inlet valve and dispenser switches: Affects water dispensing and ice maker fill.
• Defrost system parts (timer, defrost bi-metal): Prevents frost buildup on the evaporator.
• Evaporator fan parts (motor, fan blade): Moves cold air through the freezer and fresh food sections.
• Temperature control parts (thermostat): Helps regulate compressor run time and cabinet temperature.

Here are examples of frequently replaced parts available for this model:

These parts are replaced most often because they handle constant wear (door sealing and closing), moisture and freezing conditions (ice maker and defrost system), or continuous operation (fans and temperature controls). Fixing the right component restores proper temperatures, reduces frost, and helps prevent food spoilage.

• Confirm the temperature settings and allow 24 hours for stabilization.
• Check for blocked vents and overpacked shelves that restrict airflow.
• Inspect door gaskets for gaps, tears, or hardened sections.
• If ice or water is slow, verify the house shutoff valve is fully open.
• Listen for the evaporator fan; a noisy or non-running fan often points to airflow issues.

For step-by-step diagnosis ideas that match common Whirlpool symptoms, use how to prevent water dispenser and ice maker problems.

Last updated: February 2026

The most common problem we see on Whirlpool refrigerators like model ED22PBXBW01 is a cooling complaint (warm fresh food section, warm freezer, or temperature swings). The usual root causes are restricted airflow, frost buildup from a defrost issue, or a failing evaporator fan system.

• Make sure the vents inside both compartments are not blocked by food packages.
• Clean condenser coils and confirm the condenser fan area is clear of dust.
• Confirm both doors close fully and the gaskets seal all the way around.
• Listen for the evaporator fan; it should run when the compressor is running.
• Look for heavy frost on the freezer back panel (a strong sign of a defrost problem).

If your troubleshooting points to a specific failure, these model-matched parts are common fixes:

• Defrost system: refrigerator defrost timer W10822278, refrigerator defrost bi-metal WPW10225581
• Temperature control: refrigerator thermostat WP2198202
• Air movement/noise: refrigerator evaporator fan blade WP2169142

On side-by-side units, “no ice” or “no water” is often caused by a water supply problem, a failed inlet valve, or an ice maker failure. For this model, common replacements include refrigerator inlet valve 4318046 and ice maker assembly 4317943. For prevention and basic checks, use how to prevent water dispenser and ice maker problems.

Cooling and ice maker problems usually get worse over time; catching airflow restrictions, frost buildup, or a weak fan early helps protect food, reduce run time, and prevent ice from damaging fan components.

Last updated: February 2026

On your Whirlpool ED22PBXBW01 side-by-side refrigerator, the water filter location depends on the filter style used on the unit: many are inside the fresh food compartment (upper right area) or in the base grille. Replace it by removing the old cartridge, installing the new one fully seated, then flushing water.

Check these common spots on Whirlpool side-by-side models:

• Inside the refrigerator compartment at the upper right (a small filter cover or flip-down door)
• In the base grille (kickplate) at the bottom front
• Inside the refrigerator compartment near the bottom (in a small housing)

• Put a towel under the filter area to catch drips.
• Remove the old filter:
  • Push-button style: press the button, then pull the filter straight out.
  • Twist-lock style: turn the filter counterclockwise, then pull it out.
  • Flip-down cover style: open the cover, rotate or pull the filter out as the housing allows.
• Install the new filter:
  • Align the cartridge with the housing.
  • Push in firmly and twist clockwise (if twist-lock) until it stops, or push until it clicks (if push-button).
• Close any cover or the base grille.

• Dispense and discard 2 to 3 gallons of water.
• If water sputters, dispense in short bursts until the flow is steady.
• Discard the first full bin of ice after the change.

A properly seated filter prevents leaks, keeps water tasting clean, and helps the ice maker fill normally without stressing the inlet valve.

For illustrated filter-style guidance, use how to replace the water filter in a Whirlpool refrigerator.

Last updated: February 2026