$120.59 |
14% OFF MSRP : $140.00
CONFIRM THE PART FITS
Part Information
This water inlet valve (part number 4318046) is for refrigerators.
Water inlet valve 4318046 supplies water to the refrigerator ice maker and water dispenser.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $36.10 |12% OFF Phone Price : $41.10
- $48.59 |9% OFF Phone Price : $53.59
- $165.47 |8% OFF MSRP : $180.00
- $34.01 |13% OFF MSRP : $39.00
- $166.41 |6% OFF Phone Price : $176.41
- $180.84 |5% OFF Phone Price : $190.84
- $281.56 |$10.00 OFF Phone Price : $291.56
- $77.28 |19% OFF MSRP : $95.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #EHD252SMWR1 Whirlpool side-by-side refrigerator | EHD252SMWR1 | Ice maker |
| Model #1067699421 Kenmore refrigerator | 1067699421 | Icemaker parts |
| Model #1067680540 Kenmore refrigerator | 1067680540 | Icemaker parts |
| Model #1067699440 Kenmore refrigerator | 1067699440 | Icemaker parts |
| Model #1067690620 Kenmore refrigerator | 1067690620 | Icemaker parts |
| Model #1068585730 Kenmore refrigerator | 1068585730 | Icemaker parts |
| Model #KSRF22DSWHY1 KitchenAid side-by-side refrigerator | KSRF22DSWHY1 | Ice maker |
| Model #1069507951 Kenmore refrigerator | 1069507951 | Icemaker |
| Model #1068594634 Kenmore refrigerator | 1068594634 | Icemaker |
| Model #1069517652 Kenmore refrigerator | 1069517652 | Icemaker |
Reviews
Very easy to install
Hardest part of this install was moving the fridge out to access the pump at the back. Two self tapping screws hold it in, undo the water inlet first. Do I have to remind you to disconnect the power and turn off the water first? No I didn't think so. This pump has push fit water connections, fridge side, not the screw in type. Just cut the ends off the existing pipe. Removing the cardboard cover at the back of the fridge gives more room to work and a chance to vacuum out the huge dust bunnies that are not normally touched. Once reconnected, reconnect the water, put on the back cover, and fire it up.
Peter, Shreveport, LA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Works, Easy to Install, Different from OE
It works fine, and was easy to install. It probably took around 10 minutes. However, the two electrical terminals are facing the opposite direction from the Original Equipment. I had to really stretch them to make them fit, and the wires are now under tension. Perhaps the terminal orientation change was necessary to make it fit multiple models. Maybe it's possible to change the orientation of the terminals on this, but there were no instructions, and I didn't want to risk messing it up. At any rate, it now works like new. I'm glad that the part was available even for my 30 year old refrigerator.
Randy, Des Moines, IA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
No problem
Minor leak with new compression fitting. Had to use old part.
Undisclosed, Tennessee
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Installation of water solenoid
this fitting was an easy install, with good instructions and ample fittings to assist with various situations.
White R, Lake Charles, La.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
wrong parts
Wrong parts !! Both parts were not correct ones !!!!!!!
cleo 9, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Not easy to install.
It took me 3 days to find the part through different sources. It took well over 6 hours to do a job that should have been done in at least 1 hour. Instructions were incomplete.
sipiddeoo, Aurora Colorado
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Part built in mirror image to OEM.
very satisfied with service however the part was manufactured in a mirror image of the original. It took some thinking to plumb and wire it properly.
Oldeunclechuck, Peoria, IL
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour