Kenmore 79551033011 refrigerator Parts

For Kenmore model 79551033011, the correct water filter is identified by the refrigerator’s model number and the filter housing style inside the fresh food section. We match your model to the exact replacement listed for it; use the 79551033011 owner's manual to confirm the filter location and replacement steps.

• Use the full model number 79551033011 (from the rating label inside the refrigerator) when searching parts.
• Check where the filter installs (inside the refrigerator compartment, typically upper corner or base grille area).
• Look for a printed filter number on the old cartridge or on the filter head label.
• If water flow is slow or taste is off, replace the filter first before diagnosing valves or reservoirs.
• If the filter head is damaged or leaking, the filter may not seal correctly and you may need a new head.

1. Remove the old filter and wipe the label area clean.
2. Inspect the filter head for a sticker or molded part number.
3. Confirm the installation style (push-in, twist-in, or quarter-turn).
4. Use the model-based parts lookup to select the listed filter for 79551033011.

If a new filter does not restore normal dispensing, these model-matched parts are common next checks:

Using the correct filter for 79551033011 protects the water system from leaks, keeps dispenser flow consistent, and helps prevent off-taste and odor. A mismatched cartridge can bypass filtration or fail to seal in the filter head.

For step-by-step filter replacement best practices, use how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

You can’t reliably tell the exact cubic feet of a Kenmore refrigerator from the model number alone. For Kenmore model 79551033011, the correct way is to look up the capacity on the model’s rating label or in the 79551033011 owner's manual, where the listed “total capacity” is the cubic feet.

• Check the rating label inside the fresh food section (often on a side wall or ceiling); look for “Total capacity” in cu. ft.
• Check the specifications section in the 79551033011 owner's manual
• If you have the original sales paperwork, look for “capacity” or “cu. ft.”
• Measure and estimate only as a last resort (useful when labels are missing)

Kenmore model numbers help identify the series and parts (for example, filters, ice maker components, and control boards), but they do not consistently encode the refrigerator’s internal volume.

If the label is unreadable and you need a quick estimate:

• Measure interior width, height, depth of the fresh food compartment and freezer (in inches)
• Multiply to get cubic inches for each section
• Add them together, then divide by 1,728 to convert to cubic feet
• Expect the estimate to be lower than “advertised” capacity because shelves, bins, and ducting reduce usable space

Cubic feet affects food storage planning and helps when comparing replacement refrigerators. It also matters when ordering organization parts like a crisper drawer or slide rails because larger-capacity models often use different bin and rail designs.

Last updated: February 2026

For Kenmore side-by-side refrigerator model 79551033011, the exact cabinet dimensions are listed in the 79551033011 owner's manual. Most 32 to 36-inch class side-by-side refrigerators measure roughly 32 to 36 in. wide, 65 to 71 in. tall, and 28 to 34 in. deep (depth varies most with handles).

Use the spec or installation section in the 79551033011 owner's manual and record these measurements:

• Width (cabinet): body only, doors closed
• Width with doors open: needed for tight kitchens
• Height to top of case and height to top hinge
• Depth without handles and depth with handles
• Clearance requirements: space behind, above, and at sides

If you are confirming fit before moving or replacing the refrigerator, measure:

• Opening width at front and back (walls are rarely perfectly square)
• Opening height to the lowest cabinet/soffit
• Depth to the front edge of counters
• Door swing clearance (especially near islands)
• Pathway clearance (doorways, turns, stairs)

These ranges help you plan while you confirm the exact spec sheet:

Accurate dimensions prevent delivery issues and ensure proper airflow. Too little clearance can reduce cooling performance and make it harder to service parts like the condenser fan area or water line connections.

Last updated: February 2026

Most Kenmore Elite refrigerators average 12 to 15 years of service life with normal household use and basic maintenance. For your Kenmore model 79551033011 side-by-side refrigerator, consistent temperatures, clean airflow, and a healthy ice and water system are the biggest factors that help it reach that range (or longer). See the 79551033011 owner's manual for model-specific care and operating guidance.

• Condenser airflow and cleanliness (dust buildup makes the compressor work harder)
• Door seal performance (warm air leaks increase run time and frost)
• Stable temperatures (avoid frequent setting changes and overloading)
• Ice maker and water system health (clogs and leaks create stress and mess)
• Power quality (surges and outages can damage control boards)

• Food temperatures swing even after cleaning vents and confirming settings
• The unit runs almost constantly or gets unusually loud
• Repeated water leaks, slow dispensing, or ice production problems
• Frost buildup returns quickly after a full defrost
• Cooling issues persist after basic maintenance and airflow checks

• Keep door gaskets clean and ensure doors close squarely
• Leave space around the cabinet for ventilation
• Replace water filters on schedule and flush the dispenser after changes
• If you have dispenser issues, use how to prevent water dispenser and ice maker problems to reduce clogs, freezing, and leak risks

If you are troubleshooting slow water, no ice, or leaks, these model-matched parts are often involved:

• Refrigerator water inlet valve 5221JA2006D (controls water flow to dispenser and ice maker)
• Refrigerator water reservoir MJM61904702 (stores chilled water inside the cabinet)

Knowing the typical lifespan helps you decide when to invest in repairs (like a valve or reservoir) versus planning for replacement, especially if cooling performance and energy use are trending the wrong direction.

Last updated: February 2026

On Kenmore side-by-side refrigerators like model 79551033011, the model number is printed on the appliance identification label, most often inside the fresh food (refrigerator) compartment along the side wall near the door opening. Use the model number on that label when ordering parts or checking specs in the 79551033011 owner's manual.

Look for a white or silver sticker (sometimes called the rating plate) in these spots:

• Inside the refrigerator section on the left or right side wall near the front
• On the ceiling of the refrigerator compartment near the light housing
• Behind the crisper drawers on the side wall (you may need to slide drawers out)
• Along the door frame or mullion area between the doors
• Less common: on the back exterior panel near the bottom

The label typically includes both a model number and a serial number.

• Open the refrigerator door fully and scan the front edges of the cabinet walls.
• Use a flashlight; labels can be hard to see under interior lighting.
• Wipe condensation or smudges off the sticker so every digit is readable.
• Take a photo of the label so you can zoom in later.

Kenmore model numbers identify the exact design version of your refrigerator. Using 79551033011 helps us match the correct parts (for example, a water system part like the refrigerator water inlet valve 5221JA2006D) and avoid ordering look-alike components that do not fit.

Last updated: February 2026