Kenmore 11020907990 washer Parts

The most common problems we see with the Kenmore 11020907990 washer are no spin or no agitation, not draining, leaking, and excessive vibration or banging. These symptoms usually trace back to a few high-wear parts and simple checks outlined in the 11020907990 owner's manual.

Most common symptoms and what typically causes them

• Won’t spin or agitate: worn drive coupling, worn clutch, or a lid switch that isn’t closing
• Won’t drain: clogged or failing drain pump, kinked drain hose, or a restriction at the standpipe
• Leaks: tub gasket wear, hose cracks, loose clamps, or center post seal seepage
• Loud noise during spin: drive block wear, basket drive issues, or gear case wear
• Out-of-balance shaking: weak suspension springs, uneven load, or an unlevel washer

Quick checks we recommend first

1. Confirm the lid closes firmly; a bad lid switch can stop spin and agitation.
2. Check the drain hose for kinks and verify the standpipe is not blocked.
3. Level the washer and redistribute bulky loads (towels, blankets) before assuming a part failure.
4. Listen for the motor running with no movement; that often points to a drive coupling.

Parts that commonly fix these issues (when symptoms match)

Symptom	Common part to inspect	Example part on this model
No spin/no agitate	Lid switch	Washer lid switch WP3949238
No drain/slow drain	Drain pump	Washer drain pump WP3363394
Agitates poorly	Agitator dogs	Agitator dog 80040
Shaking/banging	Suspension spring	Washer suspension spring WP63907
Leaking at tub	Tub gasket	Washer tub gasket W10814296

Why it matters

Catching the right failure early prevents secondary damage. For example, a restricted drain can lead to repeated no-spin complaints, and a worn coupling can mimic a motor problem even when the drive motor is fine.

Last updated: March 2026

The Kenmore washer model 11020907990 is a traditional top-load design marketed as Super Capacity Plus, which is intended for larger loads; the exact cubic-foot capacity is listed in the 11020907990 owner's manual.

What “Super Capacity Plus” means in real use

This style of Kenmore top-load washer is built to handle bulky items and larger mixed loads when you match the water level to the load size.

• Wash full-size bath towels and jeans in balanced loads (mix items to reduce tangling)
• Use the correct water level setting for the load size to prevent poor cleaning
• Avoid overfilling above the top row of basket holes to maintain proper agitation
• For bulky items, add items loosely so water can circulate

Typical capacity range (helpful benchmark)

When a manual describes a washer as “super capacity” or “super capacity plus,” most top-load washers in this class are commonly in the about 3.2 to 3.6 cu. ft. range.

What you need	Best source	What you’ll get
Exact capacity for 11020907990	11020907990 owner's manual	Model-specific specification
Practical load guidance	Basket fill level + water level selection	Better cleaning and fewer out-of-balance spins

Why it matters

Capacity affects how much you can wash per load, but it also impacts cleaning performance. Loading within the washer’s intended range helps the agitator move items through the wash water, reduces vibration, and improves spin-out.

Last updated: January 2026

For a Kenmore washer like model 11020907990, the typical life expectancy is 10 to 15 years with normal household use. Consistent maintenance (proper loading, correct water level, and prompt repair of wear items) is what most often determines whether it lands closer to 10 or 15.

What affects washer lifespan the most

• Load size and balance: Overloading and repeated out-of-balance spins shorten the life of the drive system and suspension.
• Water quality: Hard water can increase residue and wear on valves and moving parts.
• Drain performance: Slow draining strains the pump and can leave standing water.
• Lid switch operation: A failing lid switch can stop cycles and lead to repeated restarts.
• Routine cleaning: Keeping the basket and dispensers clean reduces odor and buildup.

Common wear parts that can extend service life

If the washer still fills and drains but agitation or spinning is weak, these are frequent, repairable items on many Kenmore top-load designs:

Symptom	Often involved part	What you’ll notice
Agitator moves poorly	Agitator dog 80040	Clicking, slipping, or weak agitation
Won’t spin or agitates poorly	Coupling 285753A	Motor runs but tub does not move normally
Won’t drain or drains slowly	Washer drain pump WP3363394	Water left in tub, humming, slow drain
Stops mid-cycle	Washer lid switch WP3949238	No spin/drain with lid closed

Why it matters

A washer that is maintained and repaired early usually costs less to keep running than one that is pushed until a major failure. Replacing smaller parts (like a coupling or lid switch) can prevent secondary damage to the gear case, basket drive, or motor.

Best practices we recommend for longer life

• Use the lowest water level that still allows clothes to move freely.
• Avoid packing the basket tight; load loosely for better agitation.
• Level the washer and keep it from rocking to reduce vibration.
• Check pockets and remove heavy items that can throw loads off balance.
• Follow cycle and feature guidance in the 11020907990 owner's manual.

Last updated: January 2026