KitchenAid KSRA25CNSS00 side-by-side refrigerator Parts

The KitchenAid KSRA25CNSS00 is a full-size side-by-side refrigerator; most units in this class are about 25 cu. ft. total capacity and measure roughly 33 to 36 inches wide, 65 to 71 inches tall, and 30 to 35 inches deep (not counting handles). For the exact dimensions and capacity for your unit, use the KSRA25CNSS00 owner's manual.

When customers ask about size, we typically look at these specs:

• Total capacity (cu. ft.): overall storage space
• Width: determines if it fits between cabinets
• Height: determines clearance under soffits or upper cabinets
• Depth: determines how far it will stick out past counters
• Door swing clearance: space needed to fully open doors and bins

These ranges match most 25 cu. ft. side-by-side refrigerators like the KSRA25CNSS00.

We recommend measuring the refrigerator itself and the space it goes into.

• Measure width at the widest point of the cabinet (not the doors)
• Measure height from floor to top hinge cover area
• Measure depth from the back to the front edge of the cabinet; then measure again including handles
• Add clearance for airflow behind and above the unit
• Confirm door swing and pull-out bin clearance on both sides

Correct dimensions prevent installation surprises like doors that hit walls, drawers that cannot pull out, or restricted airflow that can cause warm temperatures and higher energy use.

Last updated: January 2026

To turn off cooling on your KitchenAid KSRA25CNSS00 without unplugging it, use the control panel’s Cooling Off feature. This stops the compressor and fans (cooling), while the refrigerator still has power for the display and lights; follow the steps in the KSRA25CNSS00 owner’s manual.

• Close both doors so the controls respond normally.
• Press and hold Lock and Measured Fill at the same time for 3 seconds.
• Confirm the display shows “Refrigeration Cooling Is Off” (wording can vary slightly by control style).
• Leave the doors closed to prevent warm air and moisture from building up inside.
• To turn cooling back on, press and hold Lock and Measured Fill again for 3 seconds.

• Move perishables to another refrigerator or a cooler.
• Empty the ice bin if you will leave cooling off for more than a few hours.
• Wipe up any water from melting ice to prevent puddles.
• If you are cleaning, keep doors open only as long as needed.

Using Cooling Off is the safest way to pause refrigeration for cleaning, moving food, or short-term maintenance without pulling the plug or shutting off the breaker.

Last updated: January 2026

On the KitchenAid KSRA25CNSS00 side-by-side refrigerator, “Max Cool” (sometimes called “Max Cold”) is a temporary boost mode that drives the refrigerator and freezer to cool harder for a set period, then returns to your normal settings. Use it after loading groceries or during heavy door opening; see the exact control steps in the KSRA25CNSS00 owner’s manual.

Max Cool is designed to recover temperature faster when the refrigerator is under extra load.

Common times to turn it on:

• After a large grocery load
• During parties or frequent door openings
• When room temperature is temporarily warmer than normal
• After cleaning when doors were open for a while

Control layouts vary by year, but the workflow is usually the same.

• Press the Max Cool (or Max Cold) button once to activate
• Confirm the indicator light or display icon turns on
• Let it run through the timed boost cycle
• Press the button again to cancel early (if your control panel allows)

If temperatures are not improving within several hours, focus on airflow and door sealing first.

• Make sure vents are not blocked by food packages
• Verify doors close fully and gaskets seal all the way around
• Confirm the condenser area is clean and has airflow
• Listen for the evaporator fan running in the freezer
• If cooling is weak and frost builds up, defrost system issues are possible

Max Cool helps protect food quality by shortening warm-up time after heavy use; it is a convenience feature, not a fix for a failing evaporator fan, defrost heater, or door seal.

Last updated: January 2026

For your KitchenAid KSRA25CNSS00 side-by-side refrigerator, the fastest way to boost ice production is to restore strong water flow to the ice maker and keep the freezer cold and stable. Start by checking for a kinked water supply line, a restricted filter, or low household water pressure; any of these will slow fill and reduce ice output.

• Make sure the shutoff valve is fully open and the supply line behind the refrigerator is not kinked or pinched.
• Confirm the freezer is set cold enough for ice making (0°F is the typical target).
• Dump old or clumped ice from the bin so the ice maker can cycle normally.
• Keep the ice maker switch/arm in the ON position and verify nothing is blocking it.
• Avoid frequent door openings; warm air slows ice harvest and refreeze.

A side-by-side ice maker needs consistent water flow. If water dispenses slowly or the ice cubes are small or hollow, focus here first.

• If you recently moved the refrigerator, re-route the line so it does not get crushed when pushed back.
• If your filter is overdue, replace it and flush the system.
• If the dispenser and ice maker both have weak flow, test the inlet valve.

Helpful resources:

• KSRA25CNSS00 manual
• How to replace the water filter in a KitchenAid refrigerator

If the water line and filter are good but ice production is still low, these parts are common culprits:

Low ice production is almost always a water-flow or temperature stability issue. Fixing the restriction (kinked line, clogged filter, weak inlet valve) restores proper fill volume so the ice maker can harvest full-size cubes on schedule.

Last updated: January 2026