Whirlpool ED5DHEXWL00 side-by-side refrigerator Parts

The Whirlpool side-by-side refrigerator model ED5DHEXWL00 is a 25.3 cu. ft. unit. For exact exterior height, width, depth, and clearance requirements (doors open, handles, and airflow space), use the dimensions listed in the ED5DHEXWL00 owner's manual.

What “how big” usually means (and what to check)

Capacity (25.3 cu. ft.) tells you storage volume, but fit issues usually come from exterior measurements and door swing. Before ordering parts or planning a move, we recommend checking:

• Overall width, height, and depth (with handles)
• Depth with doors open (90°) for drawer access
• Required clearance for ventilation at top, sides, and back
• Water line routing space (if using the ice maker and dispenser)
• Pathway clearance (doorways, hallways, and turns)

Quick reference: capacity vs. fit

Measurement type	What it tells you	Why it matters
Capacity (cu. ft.)	Interior storage volume	Helps compare size class and storage needs
Exterior dimensions	Physical size of the cabinet	Determines if it fits your kitchen opening
Door swing/clearance	Space needed to open doors fully	Prevents blocked drawers and shelf access

Why it matters

A side-by-side refrigerator can have a large capacity but still not fit if the cabinet depth or door swing is tight. Confirming the manual’s dimension and clearance specs prevents installation headaches and helps ensure proper airflow for reliable cooling.

Last updated: January 2026

If your Whirlpool ED5DHEXWL00 side-by-side refrigerator is not cooling, the most common causes are airflow or ventilation problems, a power or control setting issue, or a failed cooling component such as the evaporator fan motor, thermostat, or defrost system. Use the checks below to pinpoint the failure.

Quick checks first (fastest wins)

• Confirm the refrigerator is plugged into a grounded 3-prong outlet and the outlet has power.
• Make sure the temperature controls are turned on and not set to “off.”
• If it was just installed or restarted, allow a full 24 hours to reach temperature.
• Verify doors are closing fully and not being held open by bins or food packages.
• Check that the cabinet has proper ventilation clearance (about 1/2 inch on the sides and top).

Cooling system checks (most likely part-related)

A side-by-side that runs but will not cool often has an airflow or defrost problem.

• Evaporator fan not running: If the freezer is warm and you do not hear a fan inside, the evaporator fan motor is a prime suspect.
• Defrost failure and frost buildup: Heavy frost on the freezer back panel can block airflow; the defrost heater or defrost thermostat can be involved.
• Temperature control issue: A failed thermostat can prevent the compressor and fans from running correctly.

Common symptoms and what they point to

What you notice	What it usually means	What to check next
Freezer cold, fresh food warm	Air not moving to refrigerator side	Vents blocked, evaporator fan, frost buildup
Both sections warm, lights on	Cooling system not running	Controls, thermostat, compressor start components
Frost/ice on freezer back wall	Defrost system problem	Defrost heater, bi-metal thermostat
Runs constantly but still warm	Heat not being removed efficiently	Ventilation clearance, condenser cleanliness, sealed system

Parts that commonly fix “not cooling” on ED5DHEXWL00

These are model-matched parts we often see involved in cooling complaints:

• Refrigerator evaporator fan motor WP2315549
• Refrigerator thermostat WP2198202
• Refrigerator heater WP2323198
• Refrigerator bi-metal thermostat WPW10225581

Why it matters

When cooling is weak, food safety becomes a concern and the compressor can run excessively. Restoring proper airflow, defrosting, and ventilation helps the refrigerator cool evenly and prevents repeat icing problems.

Reference

For control settings, ventilation clearances, and troubleshooting steps specific to this model, use the ED5DHEXWL00 owner's manual.

Last updated: January 2026

On your Whirlpool ED5DHEXWL00 side-by-side refrigerator, the model number is printed on the model and serial label located on the inside wall of the refrigerator (fresh food) compartment. Use that exact model number when ordering parts or checking specifications in the owner's manual.

Where to look (fast checklist)

• Open the refrigerator door (not the freezer door)
• Look along the inside wall of the fresh food compartment
• Check near the crisper area and side walls where labels are commonly placed
• Find the label that lists both model and serial numbers
• Write the model number exactly as shown (letters and numbers)

What the label looks like

Most Whirlpool refrigerator ID labels include:

• Model number
• Serial number
• Electrical ratings (volts/amps)
• Sometimes a bar code

Why it matters

The model number identifies the exact configuration of your refrigerator (doors, dispenser, ice maker, and wiring). That ensures you get the correct replacement parts and troubleshooting steps for ED5DHEXWL00.

Quick examples of parts that depend on the model number

Part type	Example for this model	Why the model number matters
Water filter	Refrigerator water filter EDR3RXD1	Correct fit and flow rate
Ice maker	Refrigerator ice maker WPW10190965	Mounting style and harness match
Inlet valve	Refrigerator inlet valve W10408179	Correct ports and electrical connector

Last updated: March 2026