Craftsman 917258904 tractor Parts

For your Craftsman front-engine lawn tractor model 917258904, the fastest way to find the right replacement part is to match your model number to the correct parts diagram section, then confirm the part name and ID before ordering (especially for steering, deck, and electrical items like the PTO switch).

• Confirm the full model number on the tractor’s ID tag: 917258904
• Identify the system you’re repairing (mower deck, steering, ignition, fuel)
• Use the parts diagram to locate the exact callout number for that system
• Match the callout to the part listing and verify the part name and part ID
• Compare your old part to the listing (mounting holes, connector style, length, and finish)
• Order the exact match; avoid “close enough” substitutions on belts, pulleys, and switches

These are examples of model-matched parts that are often searched when troubleshooting starting, cutting, or steering issues:

Riding mower parts are highly model-specific. On Craftsman 917258904, small differences in a belt length, pulley offset, or switch connector can cause repeat failures, no-start conditions, or unsafe operation. Matching by model and diagram prevents wrong-part returns and downtime.

If you’re diagnosing the problem first, these guides help narrow down the correct section of the parts diagram to use:

• Riding mower and tractor common questions
• Riding lawn mower engine clicks but doesnt turn over video
• Riding lawn mower engine spins but wont start video

Last updated: February 2026

For a Craftsman riding mower like model 917258904, you can look up the model number by finding the model and serial tag on the tractor, then using that exact number when searching parts and diagrams. On most Craftsman tractors, the tag is on the frame under the seat or on the underside of the seat.

Check these common locations first (clean off grass and dirt so the tag is readable):

• On the frame directly under the seat
• On the underside of the seat pan
• Near the rear fender area by the seat mounting points
• On a sticker or metal plate with both model and serial information

Use the model number exactly as shown (including all digits) to match the correct Craftsman parts list.

• Enter the full model number (example: 917258904)
• Use the parts diagrams to identify the exact part name and ID
• Match by fit, not just by appearance (many parts look similar)
• If a part is missing hardware, replace the fastener with the correct type and size

Craftsman tractors often have multiple versions that look alike but use different steering, deck, and electrical parts. Using the exact model number helps you avoid ordering the wrong items, such as a lawn tractor ignition switch 532140301 or a switch.pto.3 582107601.

Last updated: February 2026

For the Craftsman front-engine lawn tractor on this page, the model number is 917258904. If you are asking about a different Craftsman 42-inch riding mower, the model number is found on the mower’s model and serial number label, not just by deck size.

On most Craftsman riding mowers and lawn tractors, the model number is printed on a sticker or metal tag in one of these common spots:

• Under the seat (seat pan area)
• On the rear fender near the seat
• On the frame rail near the engine
• Under the hood near the dash tower
• Near the transaxle on the rear frame

A 42-inch deck describes cutting width, but many Craftsman tractors share that size across different years and engine packages. The exact model number is what we use to match the correct parts list, diagrams, and fit.

• Correct deck and blade-drive parts (spindles, idlers, belts)
• Correct ignition and safety switch parts
• Correct steering and front-axle parts
• Correct fuel system parts

If your mower is Craftsman 917258904, these are examples of model-matched parts you may see listed:

Using the exact model number prevents ordering the wrong belt length, switch style, or steering component, which saves time and avoids repeat repairs.

Last updated: February 2026

A Craftsman riding mower with model number 917258904 does not have a single “model year” like a car; the exact build date is tied to the serial number and product ID tag on the tractor. We use that tag information to match the correct parts and specifications for your specific unit.

Look for the product identification label in one of these common locations on Craftsman front-engine lawn tractors:

• Under the seat pan (lift the seat and look on the frame or fender pan)
• On the rear frame plate behind the seat
• Near the engine compartment on the frame rail
• Under the hood on the chassis
• On the left or right side of the frame near the footrest

The label typically includes multiple identifiers. Record all of these:

• Model number: 917258904
• Serial number: (unique to your tractor)
• Product number or ID: (sometimes shown as a separate number)
• Engine model/type/code: (useful when ordering engine-related parts)

For repairs, the most important thing is matching the correct parts to your exact build configuration.

Craftsman tractors can keep the same model number while using different suppliers or running changes (switches, pulleys, steering parts). Using the ID tag details helps prevent ordering the wrong ignition switch, PTO switch, or drive components.

If you are troubleshooting an electrical no-start or intermittent shutoff while you’re identifying the tractor, our video guide on riding lawn mower engine clicks but doesnt turn over video is a good starting point.

Last updated: February 2026