Kenmore Elite 79641582411 washer Parts

For Kenmore Elite washer model 79641582411, the quickest way to force a drain is to run Drain & Spin and choose NO SPIN for drain-only. If the washer is paused with water in the tub, you can also power it on and press SPIN SPEED (without selecting a cycle) to activate the drain pump; details are in the owner's manual.

Fast ways to drain (try in this order)

• Drain & Spin cycle: Power on, select Drain & Spin, choose NO SPIN (drain-only), then Start/Pause.
• Pump-out from the control panel (useful if the cycle is stuck): Press POWER, then press SPIN SPEED without selecting a cycle; press START/PAUSE.
• Check the drain hose routing: Make sure the hose is not kinked, pinched, crushed, or stretched.
• Verify standpipe setup (if you use one): Keep the hose end height at 96 in. (243.8 cm) or less from the bottom of the washer.
• Avoid pushing the hose too far into the standpipe: Insert it about 8 to 12 inches.

Drain hose setup limits (from the manual)

Item	Recommended limit	Why it matters
Max hose end height	96 in.	Too high can cause poor draining and weak spin performance
Standpipe insertion depth	8 to 12 in.	Too deep can contribute to odor and contamination inside the washer
Hose past elbow bracket	4 in. max	Helps prevent siphoning and keeps the hose secured

If it still will not drain

A forced drain usually fails because of a restriction or a pump issue. Check these common causes:

• Clogged tub-to-pump path (coins, lint, small socks)
• Kinked or blocked drain hose
• Weak or failed pump motor
• Loose electrical connection at the pump
• Suds overload from non-HE detergent (can slow draining)

If you suspect the pump is not running or is noisy, the drain pump motor (4681EA2001T) - washer part by lg electronics 4681EA2001T is a common drain-related replacement for this model. You can order parts from the list for model 79641582411, or search by model on Sears PartsDirect.

Why it matters

Getting the tub fully drained protects the door lock system, improves spin performance, and helps prevent musty odors caused by standing water.

Last updated: February 2026

On Kenmore Elite washer model 79641582411, you turn Control Lock off by pressing and holding STAY FRESH for 3 seconds. When Control Lock is on, the display shows “CL” and the other controls stay disabled until you deactivate it (even after the washer powers off). See the owner's manual for the Control Lock button location on your exact control panel.

Steps to turn Control Lock off

• If a cycle is running, press START/PAUSE once (optional, but it makes button presses easier).
• Press and hold STAY FRESH for 3 seconds.
• Watch for “CL” to disappear from the display.
• Try a normal button (for example, SPIN SPEED or WASH TEMP) to confirm the panel responds.
• If needed, press and hold STAY FRESH again for 3 seconds to toggle the lock back on.

What to check if it will not unlock

• Wrong button: On this model, Control Lock is tied to STAY FRESH (not a separate “Lock” key).
• Button not registering: Press firmly in the center of the key; try again with the washer powered on.
• Panel issue: If the washer will not respond to any keys (not just Control Lock), a control-panel problem is possible.

What you see	What it means	What to do
“CL” alternating with time remaining	Controls are locked	Hold STAY FRESH 3 seconds
Washer turns on but most keys do nothing	Lock is still active	Hold STAY FRESH 3 seconds again
Door will not start a cycle and lock keeps returning	Lock is being re-enabled	Avoid holding STAY FRESH accidentally

Why it matters

Control Lock is designed to prevent cycle changes and accidental operation. Turning it off restores normal control-panel operation so you can select cycles, options, and start the washer.

If you are also ordering parts for control or door-lock symptoms, you can shop by model on this page or search by model number on Sears PartsDirect.

Last updated: February 2026

To hard reset your Kenmore Elite washer model 79641582411, unplug it (or switch off the breaker) for about 1 minute, then restore power and press POWER to turn it back on. This clears temporary control glitches without changing your saved cycle settings.

Hard reset steps (power cycle)

• Press POWER to turn the washer off.
• Unplug the washer from the outlet (or turn the circuit breaker off).
• Wait 60 seconds.
• Plug the washer back in (or turn the breaker on).
• Press POWER, then run a quick Rinse/Spin or Drain/Spin to confirm normal operation.

If the washer is stuck full of water

Your 79641582411 has a built-in way to drain without selecting a full wash cycle.

• Press POWER.
• Press SPIN SPEED (do not select a cycle).
• Let the washer drain and spin; wait for the DOOR LOCK light to turn off before opening the door.

(These steps match the drain guidance in the owner's manual.)

What a hard reset does (and does not do)

Action	What it affects	What it does not affect
Unplugging for 1 minute	Clears a temporary control “freeze”	Does not erase normal cycle options
Turning breaker off/on	Restores power after an overload	Does not fix a failed part
Draining using SPIN SPEED	Removes water so the door can unlock	Does not correct the cause of a no-drain issue

Why it matters

A hard reset is the fastest first step for symptoms like an unresponsive control panel, a cycle that will not start, or a display that seems “stuck”. If the problem returns quickly, we treat it as a real failure (often drain, door lock, or water fill related) rather than a one-time glitch.

When a reset points to a part problem

If the washer still will not drain, will not unlock, or stops mid-cycle after resetting, these parts are common suspects for this model:

• Drain pump motor (4681EA2001T) - washer part by lg electronics 4681EA2001T
• Lg washer door lock EBF61315802
• Lg washer single-solenoid water inlet valve 5220FR2006H

You can order replacement parts from the parts list for model 79641582411, or search by model on Sears PartsDirect.

Last updated: February 2026

For Kenmore Elite washer model 79641582411, the cabinet size is 27 in. wide x 29 3/4 in. deep x 38 11/16 in. high; depth is 51 in. with the door open. These dimensions help you confirm fit in a laundry closet, under a counter, or on a pedestal.

Dimensions and key specs for model 79641582411

Spec	Measurement
Width	27 in.
Depth (door closed)	29 3/4 in.
Height	38 11/16 in.
Depth (door open)	51 in.
Net weight	205 lb
Electrical	120 VAC, 60 Hz

For the full “key dimensions and specifications” section, use the owner's manual.

Space planning and clearance tips

Even when the washer fits by cabinet dimensions, we plan for hoses, airflow, and door swing.

• Allow at least 1 in. clearance on each side
• Allow at least 4 in. clearance behind the washer
• Allow at least 27 in. in front to open the door comfortably
• Confirm the floor is rigid enough for a front-load washer at high spin speeds
• Keep the washer out of freezing temperatures to prevent water system damage

Why it matters

Correct sizing prevents installation headaches like a door that cannot open fully, kinked water lines, or a drain hose that gets crushed behind the cabinet. It also reduces vibration and noise by ensuring the washer sits level with proper clearances.

Parts that commonly relate to “fit” issues

If you are troubleshooting door closing/locking problems after moving the washer, these model-compatible parts are commonly involved:

• Lg washer door lock EBF61315802
• Lg washer door lock strike MFG63099101

For additional replacement parts for model 79641582411, you can use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. Repairing a Kenmore Elite washer like model 79641582411 is worth it when the problem is tied to a single failed component and the total repair cost stays well below the price of a comparable replacement washer.

How we decide if repair makes sense

Use these checkpoints before spending money on parts or labor:

• The washer completes most cycles and the tub and cabinet are in solid condition.
• The symptom is specific (won’t drain, won’t fill, won’t lock, excessive vibration).
• The failure is not repeating after basic maintenance (filter cleaning, hose checks).
• The needed part is available for model 79641582411.

Common “worth it” repairs for this model

These issues are typically straightforward and parts-based:

Symptom	Likely cause	Example part for 79641582411
Water left in tub, won’t drain	Clogged filter or failed pump	Drain pump motor 4681EA2001T
Slow fill or no fill	Inlet valve problem	Washer water inlet valve 5221ER1003A
Won’t start, door won’t lock	Door lock or strike issue	Lg washer door lock EBF61315802
Banging, walking, heavy vibration	Worn shocks	Lg washer shock absorber ACV72909503

Quick checks before ordering parts

• Unplug for 1 minute, then retry a cycle.
• Confirm the drain hose is not kinked and the standpipe is not blocked.
• Clean the drain pump filter and remove coins, lint, and debris.
• Verify both water supply valves are fully open.
• If the door won’t latch, inspect the strike and confirm the door closes squarely.

For model-specific maintenance steps (including pump filter access), use the owner's manual.

Why it matters

A correct diagnosis prevents repeat breakdowns and avoids replacing good parts. Fixing a drain, fill, door lock, or vibration issue early also helps prevent odors, leaks, and secondary damage.

You can order parts from the list for model 79641582411, or search by model number on Sears PartsDirect.

Last updated: February 2026