Owner’s manual
Error Codes
How big is the Whirlpool model WSF26C2EXB01?
The Whirlpool WSF26C2EXB01 is a full-size side-by-side refrigerator. For exact height, width, depth (with and without handles) and total capacity, use the specification section in the WSF26C2EXB01 owner's manual; those published measurements are the right numbers for installation planning.
When we size a refrigerator opening, we match these specs from the manual:
- Overall width (cabinet)
- Overall height (to top of hinge cover or case, as listed)
- Depth listed multiple ways (cabinet only, with doors, with handles)
- Clearances needed for airflow and door swing
- Capacity (total cubic feet, plus refrigerator vs. freezer split if shown)
Depth is the most commonly misunderstood measurement; compare like-for-like.
| Spec label | What it means | Why it matters |
|---|---|---|
| Cabinet depth | Box only (no doors/handles) | Helps with counter-depth comparisons |
| Depth with doors | Cabinet plus doors | Better for “will it stick out” planning |
| Depth with handles | Doors plus handles | Most accurate for walkway clearance |
Use a tape measure and confirm your opening before moving the unit.
- Measure width at the front and back of the opening
- Measure height to the lowest cabinet, soffit, or trim
- Measure depth from the back wall to the front edge of counters
- Add clearance for door swing so bins and drawers can slide out
- Compare your numbers directly to the published specs in the manual
Using the manual’s exact dimensions prevents fit issues, blocked ventilation (poor cooling), and doors that cannot open fully next to a wall or cabinet.
Last updated: February 2026
What brand refrigerators are made by Whirlpool?
Whirlpool Corporation manufactures refrigerators sold under several brand names, including Whirlpool, Maytag, KitchenAid, JennAir, and Amana. If you own a Whirlpool WSF26C2EXB01 side-by-side refrigerator, the WSF26C2EXB01 owner's manual is the best place to confirm your exact brand and model identification details.
These are the most common refrigerator brands produced under the Whirlpool Corporation umbrella:
- Whirlpool
- Maytag
- KitchenAid
- JennAir
- Amana
| Brand name on the badge | Typical positioning | What it means for parts and service |
|---|---|---|
| Whirlpool | Mainline | Many parts are widely available by model number |
| Maytag | Performance-focused | Often shares platforms and components with Whirlpool |
| KitchenAid | Premium | May use upgraded finishes and dispenser features |
| JennAir | Luxury | More specialized features; parts lookup by model is critical |
| Amana | Value | Simpler feature sets; model-based parts matching still required |
Even when two refrigerators are made by the same manufacturer, parts can vary by model and configuration. For your Whirlpool WSF26C2EXB01, we recommend matching parts by the full model number and the exact part ID.
- Confirms the correct door style and dispenser setup
- Helps match electrical parts (controls, switches, motors)
- Prevents ordering the wrong gasket, bin, or filter style
- Speeds up troubleshooting when symptoms overlap across brands
If you are troubleshooting instead of shopping for parts, our Whirlpool refrigerator error codes guide can help you narrow down what system is failing (cooling, defrost, ice maker, or dispenser).
Last updated: February 2026
What is the most common problem with a Whirlpool refrigerator?
For the Whirlpool WSF26C2EXB01 side-by-side refrigerator, the most common issues we see are cooling problems, ice maker or dispenser trouble, and water leaks. Many of these start with airflow restrictions (dirty coils, blocked vents) or a simple water-system restriction, then progress to parts like the evaporator fan or inlet valve.
- Fridge warm, freezer cold (or uneven temps): restricted airflow, frost buildup on the evaporator, or an evaporator fan issue
- Freezer warm and fridge warm: dirty condenser coils, condenser airflow problem, or sealed-system/compressor concerns
- No ice or slow ice production: water supply restriction, frozen fill tube, or ice maker failure
- Water under the fridge or inside fresh food section: clogged/iced defrost drain or a leaking water line/valve
- Bad odors: old food spills, stagnant air, or a saturated air filter
- Set temps to typical targets: 0°F freezer and 37°F fresh food.
- Make sure vents are not blocked by food packages.
- Clean condenser coils and confirm the unit has good airflow around it.
- If you have a dispenser, verify strong household water flow and that the shutoff valve is fully open.
- Check door sealing and closing; a poor seal drives frost, leaks, and temperature swings.
If the basic checks do not fix it, these model-matched parts are common culprits:
| Problem area | Common fix | Model-matched part example |
|---|---|---|
| Odors, stale air | Replace air filter | Refrigerator air filter W10311524 |
| No water to ice maker/dispenser | Replace inlet valve | Refrigerator water inlet valve WPW10238100 |
| No ice production | Replace ice maker | Refrigerator ice maker assembly WPW10251076 |
| Warm temps, poor circulation | Inspect fan blade/motor | Refrigerator evaporator fan blade WP2169142 and evaporator motor (if needed) |
Catching the “common” issues early prevents food spoilage and helps avoid secondary damage like heavy frost buildup, overworked compressors, and recurring leaks that can damage flooring.
- Use the WSF26C2EXB01 owner's manual for temperature settings, control features, and basic care steps.
- For display or diagnostic indicators, we use the Whirlpool refrigerator error codes guide to interpret what the refrigerator is reporting.
Last updated: February 2026
