Kenmore Elite 66513862K601 dishwasher Parts

Yes. We still offer replacement parts for Kenmore dishwashers, including the Kenmore Elite 66513862K601; the key is matching parts by your full model number so you get the correct fit for items like pumps, hoses, racks, and controls. Use the parts list for your model, or search by model on Sears PartsDirect.

How to make sure you get the right part

• Confirm the full model number on the dishwasher’s rating label (use 66513862K601, not a partial number).
• Match the symptom to the system involved (drain, fill, wash, door, rack).
• Compare the part ID and description before ordering.
• Check installation notes and diagrams in the owner's manual.
• If your dishwasher was recently installed or moved, verify the drain hose routing and clamps per the installation guide.

Common Kenmore Elite 66513862K601 parts we see replaced

Here are examples of model-matched parts available for this dishwasher:

Problem you notice	Part that often fixes it	What it does
Water not draining, standing water	Dishwasher drain pump WPW10348269	Pumps water out through the drain hose
No fill or slow fill	Dishwasher water inlet valve WPW10158389	Opens to let water into the tub
Dead display or no response	Dishwasher electronic control board WPW10084141	Controls cycles, timing, and key functions
Poor wash, weak spray	Pump motor WPW10780877	Drives water circulation through the wash system
Leaks at vent area or moisture escaping	Dishwasher vent gasket WP8269259	Seals the vent to reduce leaks and moisture

Why model matching matters

Kenmore dishwashers are built in multiple design families, and parts like a drain pump, circulation motor, or dispenser can look similar but mount differently. Using the exact model number 66513862K601 prevents ordering a part that will not connect to your sump, wiring harness, or hose fittings.

Quick tip if you are troubleshooting before buying parts

If the issue is an error code or flashing lights, start with the code definition and the recommended checks (door latch, fill, drain, heating, and control). Our Kenmore 665 model dishwasher error codes guide helps you narrow the failure to the right component.

Last updated: February 2026

Your Kenmore Elite 66513862K601 is a dishwasher, not a washer; dishwasher capacity is not measured in cubic feet. For this model, capacity is typically described by place settings and rack layout, so use the 66513862K601 owner's manual for the exact loading guidance and features.

How to estimate dishwasher capacity (what to look for)

We recommend using these practical indicators instead of cubic feet:

• Place settings supported (common full-size dishwashers are often around 12 to 14)
• Upper rack adjustability and how tall items fit
• Silverware basket size and layout
• Bottom rack tine spacing for plates and bowls
• Cycle options that affect usable space (for example, tall-item wash zones)

Quick comparison: washer vs. dishwasher capacity

Appliance type	Capacity is usually measured in	What it means for you
Clothes washer	Cubic feet	How much laundry fits in the drum
Dishwasher (66513862K601)	Place settings, rack design	How many dishes fit and how well water reaches them

Parts that affect real-world “capacity”

If your dishwasher feels like it holds less than it used to, worn or missing rack components can reduce usable space.

• If the basket is cracked or missing sections, replace the dishwasher silverware basket W10807920
• If racks are bent or no longer roll smoothly, check rack condition and alignment
• If the door does not open and close smoothly, loading can become awkward; inspect hinges and links

Why it matters

Using the correct capacity measure helps you load for better cleaning and drying. Overloading or blocking spray paths can lead to poor wash results, longer cycles, and more residue.

You can order model-specific replacement parts from the parts list for Kenmore Elite 66513862K601, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes, repairing a Kenmore Elite dishwasher like model 66513862K601 is usually worth it when the problem is a common wear item (drain hose, inlet valve, fuse) or a rack issue; it becomes less cost-effective when multiple major components (motor, pump, control) are failing at the same time. Use the 66513862K601 owner's manual warranty section to factor in any coverage.

Quick way we decide: repair vs replace

We use three practical checks to make the call:

• Age and condition: Under 10 years old and otherwise solid usually favors repair.
• Repair scope: One clear failure (leak, no drain, no fill) favors repair; multiple symptoms at once favors replacement.
• Part cost vs value: If a single part is a large share of the dishwasher’s replacement cost, replacement often makes more sense.

Common repairs that are typically worth it

These are frequent, targeted fixes on 665-series Kenmore dishwashers:

• Not draining: check the drain path and consider the dishwasher drain pump WPW10348269
• Leaking at the drain connection: inspect/replace the dishwasher drain hose 8269144A
• Not filling: test the dishwasher water inlet valve WPW10158389
• Completely dead or intermittent power: check the fuse W10258275
• Broken or rusted racks: replace the rack assembly (for example, dishwasher dishrack W10728159)

Warranty details that can change the decision

For this Kenmore Elite platform, the warranty language in the manual includes coverage that can make a repair clearly worthwhile:

Item type	What it affects	Typical decision impact
Electronic control and power supply board (limited coverage period)	No power, won’t start, erratic operation	Repair often makes sense if coverage applies
Ultra Wash wash system (limited coverage period)	Motor, pump, spray performance	Repair often makes sense if coverage applies
Upper and lower racks (limited coverage period)	Rusting racks	Repair often makes sense if coverage applies

Check your purchase date and the exact terms in the 66513862K601 owner's manual.

Why it matters

A dishwasher repair is most cost-effective when it restores normal wash and drain performance with one part and one service visit. When you delay a drain, fill, or leak problem, you can end up needing additional parts (pump, motor, control) instead of one targeted fix.

You can order replacement parts for model 66513862K601 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Common problems we see with Kenmore dishwashers (including Kenmore Elite model 66513862K601) are no-start issues, stopping mid-cycle, poor draining, poor drying, and wash performance problems caused by loading, water supply, or a failing pump or control. Use the 66513862K601 owner's manual troubleshooting steps to narrow it down fast.

Most common symptoms and what they usually point to

• Won’t start or stops during a cycle: door not fully latched, cycle not set correctly, power interruption, or household breaker/fuse issue
• START/RESUME light flashing: door opened mid-cycle or power was interrupted
• Not draining: drain path restriction, drain hose issue, or a failing drain pump
• Not drying well: no rinse aid, overloaded racks, plastics holding water, or air-dry selected
• Marks or stains on dishes: aluminum contact marks, tomato-based staining on plastics, or loading issues

Quick checks we recommend first (no tools)

1. Confirm the door is closed tightly and latched.
2. Verify the cycle is selected correctly and the dishwasher is actually set to start.
3. Check the home circuit breaker or fuse.
4. Make sure the water shutoff valve is turned on.
5. If it starts, run the shortest cycle; after about 2 minutes, open the door and confirm there is water in the bottom of the tub.

Common problems and likely parts (for 66513862K601)

Problem	What to check first	Part that often fixes it
Dishwasher won’t drain	Kinked/clogged drain line, disposer knockout, sink air gap (if used)	Dishwasher drain pump WPW10348269 or dishwasher drain hose 8269144A
Dead/no power	Breaker/fuse, wiring, then internal protection	Fuse W10258275
Stops, erratic behavior	Power interruption, door opened, then control issues	Dishwasher electronic control board WPW10084141
Poor wash or weak spray	Filters/sump area, then circulation motor performance	Pump motor WPW10780877

Why it matters

Catching the “simple” causes first (door latch, power, water supply, correct cycle selection) prevents unnecessary part replacement. When a part is needed, matching the symptom to the right system (drain, fill, wash, or control) saves time and restores normal cycle operation.

For error-code driven troubleshooting, use Kenmore 665 model dishwasher error codes. For ordering model-matched replacement parts, start with the parts list for 66513862K601, or search by model on Sears PartsDirect.

Last updated: February 2026