KitchenAid KSRS25RSMS01 side-by-side refrigerator Parts

The KitchenAid KSRS25RSMS01 is a full-size side-by-side refrigerator; most models in this class are about 33 inches wide, 65 to 71 inches tall, and 30 to 35 inches deep (depth varies most depending on handles and door swing). For the exact dimensions and capacity for your unit, use the KSRS25RSMS01 owner's manual.

These are the most common exterior measurements for a KitchenAid side-by-side like KSRS25RSMS01:

• Width: 32 3/4 to 33 inches
• Height (to top of cabinet/hinge): 65 to 71 inches
• Depth (cabinet only): 28 to 32 inches
• Depth (with doors/handles): 30 to 35 inches
• Door clearance needed: plan extra space so doors can open fully

Use a tape measure and capture these three numbers so you can confirm fit through doorways and into the cutout:

• Measure width at the widest point (often the hinge side or handles)
• Measure height from floor to the highest point (hinge cover can be highest)
• Measure depth from the wall to the front edge of the handles
• Check door swing and pull-out clearance for crisper drawers
• Confirm the water line has slack if the unit has an ice maker/water dispenser

Getting the exact size prevents installation headaches like doors that cannot open fully, drawers that hit a wall, or a refrigerator that cannot be rolled into place. It also helps when ordering parts that relate to door alignment and sealing.

If you are also troubleshooting door closing or alignment after moving the refrigerator, the refrigerator door cam (black) WP2182179 is one common wear item that can affect how the door rides and closes.

You can order replacement parts for KSRS25RSMS01 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most KitchenAid refrigerators last 14 to 17 years on average, and a well-maintained unit commonly reaches 10 to 20 years. For your KitchenAid KSRS25RSMS01 side-by-side refrigerator, consistent maintenance and quick fixes (seals, airflow, defrost, water system) are what most directly extend service life; see the KSRS25RSMS01 owner's manual for model-specific care and warranty details.

A refrigerator’s lifespan is mainly driven by compressor workload, airflow, door sealing, and defrost performance.

• Usage and ambient heat: hot garages and tight cabinets shorten life
• Door gasket condition: leaks force longer run times
• Condenser cleanliness: dust raises operating temperature
• Evaporator fan performance: weak airflow causes warm temps and icing
• Water and ice system health: leaks and clogs create secondary damage

We recommend these habits for KSRS25RSMS01 owners:

• Keep temperatures steady (avoid frequent dial changes)
• Clean door seals and confirm the doors close firmly
• Leave space for ventilation around the cabinet
• Replace the water filter on schedule; a restricted filter can reduce dispenser flow and strain the inlet valve
• Address frost buildup early (it often points to a defrost or airflow issue)

If performance issues show up, these model-compatible parts are often involved:

A refrigerator that runs longer and hotter than normal wears out sealed-system components faster. Simple upkeep (seals, airflow, filter changes) reduces run time, stabilizes temperatures, and helps the compressor and evaporator last longer.

If you need replacement parts, order directly from the parts list for KSRS25RSMS01 or search by model on Sears PartsDirect.

Last updated: February 2026

For KitchenAid side-by-side refrigerators like model KSRS25RSMS01, the most common issues we see are ice maker problems (no ice, slow ice, small cubes) and cooling complaints (warm refrigerator section, frost buildup). These are often tied to airflow restrictions, water supply problems, or defrost system faults; use the KSRS25RSMS01 owner's manual to match symptoms to checks.

• Ice maker not making ice or slow production: restricted water flow, clogged filter, or a failing ice maker assembly
• Water dispenser slow or sputtering: filter restriction or air in the water line after service
• Warm fresh food section but freezer seems OK: evaporator fan or air diffuser issue
• Frost buildup on the freezer back wall: defrost heater or defrost thermostat problem
• Noisy operation: evaporator fan blade rubbing ice or a worn fan motor

1. Confirm the temperature settings are at normal targets (most refrigerators run best around 0°F freezer and 37°F fresh food).
2. Check for blocked vents (packages against the rear wall can stop airflow).
3. If you have a water/ice dispenser, replace the filter if it is overdue; a restricted filter can reduce ice and water flow.
4. Listen for the evaporator fan in the freezer; it should run when the compressor is running and the door switch is closed.
5. Look for frost or ice buildup that suggests a defrost problem.

Ice maker and cooling problems usually get worse over time. A restricted water filter can strain the water inlet valve, and a defrost failure can lead to heavy frost that blocks airflow and causes temperature swings.

• Follow our step-by-step article: how to replace the water filter in a KitchenAid refrigerator

If you decide to replace parts, you can order KSRS25RSMS01 parts from the list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026