Kenmore Elite 11085876401 dryer Parts

On the Kenmore Elite dryer model 11085876401, the model number is typically printed on a rating label inside the dryer door opening, on the cabinet frame (top, side, or front edge). Open the door and scan the full perimeter of the opening for the sticker.

• Inside the door opening on the front cabinet frame near the latch side
• Inside the door opening on the hinge side of the cabinet frame
• Along the top lip of the door opening (just under the top panel)
• On the inner surface of the door (less common)
• On the rear panel if the front label is missing or painted over

The label usually includes the model number and serial number. For parts lookup and diagrams, we recommend copying:

• Model number: 11085876401
• Serial number (helps confirm production series)
• Electrical info (volts/amps) if you are troubleshooting heat or power issues

Kenmore Elite dryers often share similar cabinet designs across multiple model families (for example, 110.8508#, 110.8509#, 110.8586#, 110.8587#). Using the exact model number prevents ordering the wrong heating, drum, or door parts.

If you are matching parts or checking operating details after you find the label, use the 11085876401 owner's manual for model-specific guidance.

Last updated: February 2026

For Kenmore Elite dryer model 11085876401, the most common display codes include PF (power failure) and E1/E2/E3 service codes. Many “F” codes point to control, keypad, heater relay, or temperature-sensing problems; we use the code to narrow the failure to a specific circuit or part.

Here are the codes customers most often ask about:

• PF: Power failure during a cycle; press and hold START to restart.
• E1 / E2 / E3: Service codes; typically require diagnosis of the control or wiring.
• F:01: Main electronic control board failure.
• F:02: Keypad or user interface failure.
• F:20: Heater relay failure.
• F:22 / F:23: Outlet thermistor failure.
• F:24 / F:25: Inlet thermistor failure.

For model-specific button sequences, display behavior, and troubleshooting steps, follow the 11085876401 owner’s manual.

Unplug the dryer or switch off the breaker before inspecting anything internal.

• If you see PF, confirm both household breakers (or fuses) for the dryer are on and not tripped.
• If the dryer runs but you do not feel heat, check that both breakers are on; electric dryers can run with only one leg of power.
• Make sure the lint screen is clean and airflow is strong at the outside vent hood.
• If the load is getting too hot or drying takes too long, check for a crushed or clogged exhaust duct.
• If an error points to temperature sensing, the thermistor circuit is a common place to test.

Using the right code meaning prevents unnecessary part swaps. For example, a “no heat” complaint can be a tripped breaker, restricted venting, or a failed heating element; the code and a few checks help pinpoint the real cause.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and the Kenmore Elite dryer model 11085876401 is built to deliver more premium features and performance than basic Kenmore dryers when it’s installed, operated, and maintained as described in the 11085876401 owner’s manual.

In practical terms, “Elite” usually indicates a step up in design and capability compared to standard models.

Common high-end traits include:

• More cycle and option choices (cycles, options, modifiers)
• More advanced dryness control (sensor-based drying on many Elite models)
• Quieter operation and a more refined feel (cabinet, drum support, airflow design)
• Convenience features such as an interior drum light and end-of-cycle signal
• Better long-term serviceability because key wear items are replaceable

We recommend comparing what you actually use: drying results, noise, and reliability.

If the dryer is noisy, slow to dry, or inconsistent, these common parts can make a high-end dryer feel “not high end” until they’re serviced:

• Support WPW10314173 (drum support roller) for thumping or rumbling
• Dryer heating element WP3387747 for no-heat or weak-heat symptoms
• Dryer thermistor WP8577274 for temperature regulation issues
• Venting components and lint buildup (airflow restrictions)

A Kenmore Elite dryer earns its “high end” reputation when airflow is strong, temperature is controlled, and wear parts (rollers, idler, blower) are in good shape. Maintenance and correct venting protect drying speed, fabric care, and energy use.

Last updated: February 2026

For Kenmore Elite dryer model 11085876401, replacing the heating element typically costs $70 to $120 for the part and $180 to $400 total if you hire a technician (parts plus labor). If you do the repair yourself, your cost is usually the part plus basic supplies.

• Vent restriction or overheating: A clogged vent can overheat the heater circuit and take out safety fuses.
• Blown thermal cut-off: Many “no heat” calls also need a safety kit such as dryer thermal cut-off fuse kit 279973.
• Burned wiring/terminals: If the element connector is scorched, a wire/terminal kit may be needed.
• Electrical supply issue: This dryer can run but not heat if one leg of power is missing; the manual notes some homes have two fuses/breakers to check.
• DIY vs. pro: Pros often replace related wear items during the same visit to prevent repeat failures.

We recommend these fast checks first because they often explain “no heat” without replacing the element:

• Confirm the cycle and temperature setting are correct.
• After 5 minutes of running, open the door and feel for heat (then cancel the cycle).
• Check both dryer breakers/fuses are on and not tripped.
• Clean the lint screen and make sure airflow is strong at the outside vent hood.
• Review the troubleshooting steps in the 11085876401 owner’s manual.

A failed heating element is common, but airflow problems and blown safety devices are just as common on electric dryers. Fixing the root cause (lint buildup, crushed duct, weak airflow) helps the new heater last longer and improves drying performance.

Last updated: February 2026