How much does it cost to replace a riding lawn mower engine?
For a Craftsman riding lawn tractor like model 917258922, a full engine replacement typically costs $800 to $2,500 installed (engine, labor, and incidentals). The biggest cost drivers are engine brand/horsepower, whether the crankshaft matches your pulleys, and how much shop time is needed.
- Engine: $500 to $1,800 (most common range)
- Labor: $300 to $900 (often 4 to 8 hours)
- Extras: $0 to $300 (belts, pulleys, fuel line, battery, blades, shop supplies)
| Item | Typical range | Notes |
|---|---|---|
| Engine only | $500 to $1,800 | Varies by horsepower and crankshaft specs |
| Labor only | $300 to $900 | More if rusted fasteners or wiring issues |
| Total installed | $800 to $2,500 | Most owners land here |
- Crankshaft size and length (must match your existing pulleys and PTO setup)
- Wiring and safety interlocks (more time if connectors are modified)
- Fuel system condition (old fuel can clog carburetion and add diagnostic time)
- Deck and drive belt wear (a slipping belt can be mistaken for low power)
- Shop minimums and pickup/delivery (common add-ons)
Many “needs an engine” symptoms are caused by starting, fuel, or safety-switch issues. We recommend checking these first:
- Battery voltage and cable corrosion
- Starter solenoid click vs. crank condition
- Fuel flow from tank and condition of fuel lines
- Spark and air filter restriction
- Safety interlock switches (seat, brake, PTO)
A quick DIY reference that helps narrow this down is riding lawn mower engine spins but wont start video.
An engine swap is one of the highest-cost repairs on a riding mower. Spending a little time diagnosing first helps you avoid replacing a good engine when the real issue is fuel delivery, ignition, or an interlock circuit.
Last updated: February 2026
Is it worth replacing a lawn mower engine?
Yes, replacing the engine on your Craftsman riding tractor model 917258922 is worth it when the tractor’s deck, steering, and transmission are solid and the total engine-swap cost stays well below the cost of a comparable new rider. If the chassis is worn out or multiple major systems need work, replacement is the better value.
- Replace the engine if the mower deck is straight (no cracks/rot) and spindles turn smoothly.
- Replace the engine if the transmission drives strongly (no slipping, whining, or loss of pull).
- Replace the engine if you can do the work yourself or have affordable labor.
- Replace the engine if you plan to keep the tractor 3+ more seasons.
- Skip the engine swap if the deck is damaged, steering is loose, or parts you need are becoming hard to source.
- Skip the engine swap if the total repair cost is near half the price of a new comparable rider.
Use this simple comparison to keep the decision objective.
| Item to compare | Engine replacement usually makes sense when… | Buying a new rider usually makes sense when… |
|---|---|---|
| Total cost | Engine + incidentals is clearly less than a new mower | Repair cost approaches new mower pricing |
| Condition | Deck, frame, and drivetrain are in good shape | Multiple major systems are worn or failing |
| Downtime | You can tolerate a DIY project timeline | You need immediate reliability |
Even when the engine is the main issue, we often see related wear items show up during reassembly and testing:
- Lawn tractor ignition switch 532140301 if the key switch is intermittent
- Switch.pto.3 582107601 if the PTO won’t engage consistently after the swap
- Lawn tractor ground drive belt, 1/2 x 84-1/2-in 532140218 if the drive belt is glazed or stretched
- Lawn tractor idler pulley 532139245 if the pulley is noisy or wobbly
An engine swap can restore power and reliability, but it only pays off when the rest of the tractor is a good platform. If the deck and drivetrain are already near end-of-life, a new engine can leave you chasing the next failure.
Last updated: February 2026
What engine does Craftsman riding mower use?
The Craftsman riding mower model 917258922 uses a gasoline, vertical-shaft riding-mower engine; the exact engine make, model, and horsepower are identified on the engine ID label. We use that ID label information to match the correct engine parts and tune-up items.
Record the engine identification numbers first; that is the fastest way to get the right carburetor, air filter, spark plug, and fuel system parts.
- Confirm the tractor model tag shows 917258922 (commonly under the seat or on the frame).
- Find the engine ID label on the engine shroud, valve cover, or near the starter.
- Write down the full set of numbers (typically model, type, and code or a spec number).
- Use those numbers when selecting engine parts; they determine the correct fit.
- If the label is dirty, wipe it clean and take a clear photo for reference.
Craftsman tractors in this class are commonly equipped with either a single-cylinder or V-twin engine depending on the exact build.
| What you see on the tractor | What it usually indicates | Why it matters |
|---|---|---|
| 1 spark plug | Single-cylinder engine | Different air filter, carburetor, and ignition parts |
| 2 spark plugs | V-twin engine | Different tune-up parts and some fuel system components |
If the mower will not crank or it cranks but will not start, these tractor components are frequent causes:
- Lawn tractor ignition switch 532140301 (worn contacts can prevent power to the starter circuit)
- Switch.pto.3 582107601 (a faulty PTO switch can interrupt the safety interlock)
- Husqvarna lawn tractor fuel tank 532151346 (debris, water, or venting issues can restrict fuel flow)
The engine ID label is the only reliable way to match the correct engine parts because the same Craftsman tractor model can be built with different engine variants over time.
Last updated: February 2026
What model number is the Craftsman 917258922?
The model number for this Craftsman front-engine lawn tractor is 917258922. That full model number is what we use to match the correct parts (like belts, switches, and steering components) and ensure fit on your specific tractor.
On most Craftsman riding mowers and tractors, the model tag is on the frame in an easy-to-spot area. Check these common locations:
- Under the seat on the seat pan or rear fender area
- On the left or right side of the frame near the engine
- Near the rear axle area on the frame rail
- Under the hood area on the chassis (less common)
Craftsman tractors can look similar across years, but parts can vary by deck size, transmission type, and steering setup. Using 917258922 helps us select the right part ID and avoid ordering a look-alike that will not fit.
Here are a few parts on this model page that are matched by model number:
- Lawn tractor ignition switch 532140301
- Switch.pto.3 582107601
- Lawn tractor ground drive belt, 1/2 x 84-1/2-in 532140218
| What you see | What it means | Use it to order parts? |
|---|---|---|
| 917258922 | Craftsman model number | Yes |
| Engine model/type code | Engine identification (Briggs, etc.) | Sometimes (engine parts only) |
| Deck or frame numbers | Sub-assembly identifiers | Not usually |
Ordering parts by the correct model number saves time and prevents returns, especially for fit-critical items like a ground drive belt, PTO switch, or ignition switch.
Last updated: February 2026
What year did Craftsman make the 917258922?
Craftsman model 917258922 was built during the LT1000-era production run, which is typically late 1990s through mid-2000s. To pin down the exact year for your specific tractor, we use the product identification label (usually under the seat or on the frame) and match its date/serial information.
Look for a white or silver ID label and record everything exactly as shown.
- Check under the seat on the fender pan
- Check the rear frame near the hitch plate
- Check the left side frame rail (near the engine or footrest)
- Write down the model number, serial number, and any date code
- If the label is dirty, wipe it gently so the numbers are readable
Most Craftsman 917-prefix tractors were produced for Sears by a major OEM; the serial/date code is what narrows the year.
| What you find on the label | What it’s used for | What you should do next |
|---|---|---|
| Model number (917258922) | Identifies the tractor family/configuration | Use it to pull the correct parts diagrams |
| Serial number | Tracks production sequence | Keep it for parts matching |
| Date code (if present) | Often indicates month/year of manufacture | Use it to determine the exact year |
The exact year affects parts fitment for common wear items like belts, steering parts, and switches. For example, an ignition or PTO circuit update can change which electrical parts match your tractor.
If you’re troubleshooting starting or electrical issues while you’re identifying the year, we recommend using riding lawn mower engine clicks but doesnt turn over video as a quick diagnostic walkthrough.
Last updated: February 2026
