Owner’s manual
Error Codes
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10658026801, the model number is printed on the appliance identification label (the same label that also lists the serial number). We use that exact model number to match the correct parts list, diagrams, and repair information in the owner's manual.
Common places to check first
Look for a paper or foil label in one of these typical locations:
- Inside the fresh food compartment on a side wall near the top front
- On the ceiling of the fresh food compartment near the light housing
- Along the door frame (hinge side) when the refrigerator door is open
- Behind the base grille or near the lower front frame area
- On the back exterior panel (less common, but possible)
What the label usually shows (and how to use it)
The ID label typically includes both a model number and a serial number.
| Item on label | What it’s for | Example format |
|---|---|---|
| Model number | Identifies the exact design so parts fit | 10658026801 |
| Serial number | Identifies production run and date info | Letters plus numbers |
Why it matters
Kenmore model families can look nearly identical, but parts like the water filter, ice maker, electronic control, and door hardware can vary by model. Using the exact model number helps you avoid ordering the wrong part.
If you’re ordering a common replacement part
Once you confirm the model number, you can order parts from the list for this model or search by model on Sears PartsDirect. For example, this model uses a compatible refrigerator water filter such as refrigerator water filter EDR3RXD1 when it’s time for replacement.
Last updated: February 2026
How to read Kenmore model numbers?
Kenmore model numbers tell us who built the appliance and which design family it belongs to. On Kenmore refrigerator model 10658026801, the first three digits (106) identify the manufacturer group, and the remaining digits narrow down the exact series and configuration; we use the full model number to match the correct parts and manual.
Where to find the model number on a side-by-side refrigerator
We recommend checking these common locations first:
- Inside the fresh food compartment on a wall near the crisper drawers
- On the ceiling or side wall inside the refrigerator section
- Along the door frame when you open the refrigerator door
- Behind the toe grille or base grille area (less common)
- On the back of the cabinet (least convenient)
For model-specific labeling and safety information, use the 10658026801 owner's manual.
How Kenmore model numbers are structured (what the digits mean)
Most Kenmore model numbers follow a predictable pattern that helps us identify the correct parts list.
| Section of model number | Example | What it tells us |
|---|---|---|
| Prefix (first 3 digits) | 106 | Manufacturer identifier used for Kenmore sourcing |
| Base model and series | 58026 | Design family and platform |
| Variation / engineering digits | 801 | Feature and production variation |
Quick tips for using the model number correctly
- Use the entire model number, not just the first 3 digits
- Match every digit; one digit off can point to a different ice maker, control, or shelf layout
- If you are ordering parts, pair the model number with the part ID for accuracy
Why it matters when ordering parts
Kenmore refrigerators often share similar styling across multiple series, but internal components can differ. Using the full model number helps us select compatible items like a water filter, ice maker, or water inlet valve.
If you are shopping for replacement parts beyond what is listed for this model, search by the full model number on Sears PartsDirect.
Last updated: February 2026
Which Kenmore refrigerators are made by Whirlpool?
Many Kenmore refrigerators are built by Whirlpool; the quickest way to tell is the model number prefix. If your Kenmore model number starts with 106, it is a Whirlpool-built Kenmore, so Kenmore 10658026801 falls in that group. For model-specific identification details, check the 10658026801 owner's manual.
How to identify the manufacturer from the model number
On Kenmore appliances, the first three digits of the model number commonly indicate the original manufacturer.
- 106: Whirlpool-built (common for many Kenmore refrigerators)
- 110: Whirlpool-built (often laundry)
- 665: Whirlpool-built (often dishwashers)
- Use the full model number (not just the prefix) when ordering parts like a water filter or ice maker
What this means for parts and repairs
If your Kenmore refrigerator is Whirlpool-built, parts selection and troubleshooting often align with Whirlpool-style designs (controls, ice maker layout, water filtration, and defrost system).
Common Whirlpool-built Kenmore 106-series service areas include:
- Water filtration and dispenser flow
- Ice maker production and dispensing
- Defrost performance (heater, thermostat, control)
- Evaporator fan airflow and noise
Parts examples for Kenmore 10658026801
These are examples of model-matched parts that support common Whirlpool-built Kenmore 106 refrigerator systems:
| System | Example part | What it affects |
|---|---|---|
| Water filtration | Refrigerator water filter EDR3RXD1 | Taste/odor, flow rate, dispenser performance |
| Ice production | Refrigerator ice maker 2198597 | Ice harvest and refill cycles |
| Defrost | Refrigerator defrost heater WP2323198 | Frost removal from evaporator |
| Water supply | Refrigerator water inlet valve W10408179 | Water to ice maker and dispenser |
Why it matters
Matching the correct manufacturer family helps you choose compatible replacement parts and follow the right troubleshooting steps for your Kenmore side-by-side refrigerator. When you are ready to order, use the parts list for model 10658026801, or search by model on Sears PartsDirect.
Last updated: February 2026
What's the average lifespan of a Kenmore refrigerator?
Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore 10658026801 side-by-side refrigerator, lifespan depends most on basic upkeep (cleaning, airflow, and door sealing) and fixing small issues early using the care steps in the owner's manual.
Typical lifespan and what changes it
A refrigerator’s sealed system (compressor, evaporator, condenser) often lasts the longest; day-to-day problems usually come from wear items and airflow restrictions.
- 10 to 15 years is the typical lifespan for most refrigerators
- 15+ years is common when coils are kept clean and doors seal tightly
- Heavy use, hot garages, and dirty condenser coils can shorten life
- Water and ice components need periodic attention (filters, valves, ice maker)
Maintenance that extends life (high impact)
These steps prevent overheating, frost issues, and water leaks.
- Vacuum and brush condenser coils regularly
- Keep door gaskets clean and sealing evenly
- Replace the water filter on schedule; a clogged filter strains the water system
- Confirm the freezer vents are not blocked by food packages
- Address unusual noises quickly (often fan or ice maker related)
Common wear items vs. major repairs
| Category | Examples | What you’ll notice |
|---|---|---|
| Routine maintenance | Water filter, cleaning | Slow water, odors, warmer temps |
| Mid-level repairs | Ice maker, inlet valve, fan motor | No ice, leaks, warm freezer |
| Major sealed-system | Compressor, evaporator, condenser | Poor cooling in both sections |
If your water or ice performance drops, common model-matched parts include the refrigerator water inlet valve W10408179, refrigerator ice maker 2198597, and genuine Kenmore refrigerator water filter EDR3RXD1. You can order replacement parts from the parts list for model 10658026801, or search by model on Sears PartsDirect.
Why it matters
Knowing the typical lifespan helps you decide whether to maintain, repair, or plan a replacement. A well-sealed door and clean coils reduce compressor run time, which is the biggest driver of long-term reliability and energy use.
Last updated: February 2026
How many cubic feet is my Kenmore refrigerator by model number?
For Kenmore model 10658026801, the most reliable way to get the exact cubic-foot capacity is to use the model’s specification information in the Owner's manual or read the rating plate inside the fresh food compartment. That gives the true “as-built” capacity for your specific refrigerator.
Fast ways to find the capacity (best to least effort)
- Check the rating plate inside the refrigerator section (often on a side wall or near the crisper area); it typically lists capacity in cubic feet.
- Look up the specifications section in the Owner's manual for model 10658026801.
- If you are measuring for fit, use the manual’s installation clearances as your guide (capacity does not always correlate to exterior size).
What to look for on the rating plate
The rating plate usually includes:
- Model number (10658026801)
- Serial number
- Electrical ratings
- Sometimes total capacity and compartment capacities
Capacity vs. space planning (why it matters)
Cubic feet tells you storage volume, but it does not guarantee the refrigerator will fit your opening. For installation planning, our manual guidance for this style includes typical clearances like 1/2 inch on the sides and top and about 2 inches near a fixed wall so doors can swing properly.
Quick reference table
| Need | Best source | Why |
|---|---|---|
| Exact cubic feet | Rating plate or Owner's manual | Matches your specific unit |
| Fit in cabinet opening | Owner's manual clearances | Prevents door swing and airflow issues |
| Water/ice space needs | Owner's manual | Accounts for water line connections |
Ordering parts while you check specs
If you are matching parts while confirming capacity, you can order model-specific items from the parts list for 10658026801, or search by model on Sears PartsDirect.
Last updated: February 2026
