Kenmore 79551313014 refrigerator Parts

Your Kenmore side-by-side refrigerator model 79551313014 has a total capacity of 25.1 cubic feet. That breaks down to 17.7 cu. ft. for the fresh food (refrigerator) section and 7.4 cu. ft. for the freezer.

Even though the capacity is known for this model, it is still useful to verify it on your unit when comparing specs or ordering accessories.

• Check the rating label inside the refrigerator compartment (commonly on a side wall near the crisper area).
• Look for wording such as “total volume” or “cu. ft.”
• Use the full model number 79551313014 from the label to match specifications.
• Keep the serial number handy if you are comparing production variations.

For additional specifications and feature details, use the 79551313014 owner's manual.

Knowing the exact cubic-foot capacity helps you compare side-by-side refrigerators accurately, choose correctly sized bins and organizers, and set expectations for usable shelf space and freezer storage.

Last updated: February 2026

Kenmore model numbers are read as a full prefix plus the remaining digits; the prefix helps identify the original manufacturer and the rest narrows down the exact design and version. For your Kenmore refrigerator model 79551313014, using the complete number is the most reliable way to match the correct parts and documentation in the 79551313014 owner's manual.

A Kenmore model number is mainly used for two things: identifying who built the unit and ensuring you get compatible replacement parts (like an ice maker, thermistor, or control board).

• Prefix (first 3 digits): manufacturer identifier (who built it for Kenmore)
• Middle digits: model platform or series (design family)
• Ending digits: feature and production variations (revisions, options)
• Full model number matters: small digit changes can mean different shelves, bins, or electronics

On most Kenmore side-by-side refrigerators, the model/serial tag is typically found in one of these spots:

• Inside the fresh food compartment on a side wall
• Along the door frame when you open the refrigerator door
• Near the crisper drawer area
• Behind the toe grille (less common)
• On the back panel (less common)

Even within the Kenmore 795 prefix family, parts can vary by revision. For example, these parts are model-matched by exact number:

• Copy the model number exactly as printed (include all digits)
• Use the model number when ordering common items like door bins, drawer rails, and dispenser parts
• If you are troubleshooting dispenser issues, follow the steps in the manual first, then reference parts like the refrigerator auger motor EAU59551204 only if symptoms match

Using the complete Kenmore model number prevents wrong-part returns and speeds up repairs, especially for fit-sensitive items (bins, drawers, hinges) and electrical parts (boards, sensors).

Last updated: February 2026

To replace the ice maker in your Kenmore 79551313014 side-by-side refrigerator, we remove the ice bin, disconnect power, unmount the old ice maker, transfer any reusable parts (like the wire shutoff arm, if used), then install and test the replacement ice maker. Use the 79551313014 owner's manual for your exact access and mounting details.

• Unplug the refrigerator or turn off the circuit breaker.
• Turn off the water supply to the refrigerator.
• Empty the ice bin and remove it (this gives you working room).
• Protect the floor with towels; a small amount of water can spill.
• Use a nut driver or screwdriver that fits the mounting screws.

1. Remove the ice bin and any shelves or trim blocking access.
2. Disconnect the ice maker wiring harness (usually a plug connector near the ice maker head).
3. Remove mounting screws and lift the ice maker off the mounting tabs/bracket.
4. Move any reusable pieces from the old unit to the new one if required (for example, a shutoff arm or fill cup guide, depending on design).
5. Install the new ice maker, hang it on the tabs, then tighten the mounting screws.
6. Reconnect the wiring harness, reinstall the ice bin, restore water and power.
7. Test operation: allow time for the mold to fill and freeze; discard the first batch of ice.

For Kenmore 79551313014, the listed ice maker assembly is lg refrigerator ice maker assembly 5989JA1002D.

• Confirm the freezer is cold enough (target is about 0°F).
• Make sure the shutoff arm (if equipped) is down and not blocked by the ice bin.
• Verify strong water flow at the dispenser; weak flow often points to a supply or valve issue.
• Check for a frozen fill tube or ice blockage in the chute.
• If the dispenser area is involved, follow how to disassemble a Kenmore refrigerator dispenser to inspect for ice jams or broken actuator pieces.

A correctly installed ice maker needs proper freezer temperature, steady water supply, and a solid electrical connection. Fixing those basics prevents repeat failures and helps the new assembly cycle normally.

Last updated: February 2026

To replace the water filter in your Kenmore 79551313014 side-by-side refrigerator, open the filter access door (commonly at the bottom front inside the fresh food section or behind a small grille), remove the old filter by turning or pulling it out, then install the new filter and flush water to clear air and carbon fines. See the 79551313014 owner's manual for the exact filter location and removal style.

• Dispense a few cups of water first to relieve pressure and confirm flow.
• Open the filter cover or access door.
• Remove the old filter:
  • Twist type: turn the filter counterclockwise until it releases.
  • Push/pull type: press the release button or pull straight out.
• Install the new filter:
  • Push in fully, or insert and twist clockwise until it locks.
• Close the access door and check for leaks around the filter head.
• Flush the system by dispensing water for 3 to 5 minutes (or several gallons) until it runs clear.

Many Kenmore side-by-side refrigerators reset using a button on the dispenser panel.

A fresh refrigerator water filter helps maintain water flow to the dispenser and ice maker, improves taste and odor, and reduces the chance of slow dispensing that can strain the water system.

For more Kenmore-specific tips on filter styles and replacement, use how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 33 inches to 36 inches wide; for the exact cabinet width of model 79551313014, we recommend confirming the specification in the 79551313014 owner's manual.

Side-by-side refrigerator width is usually listed as the cabinet width (case) and can differ slightly from the door-to-door measurement.

• 33 in. class: common for tighter kitchens and older cutouts
• 36 in. class: most common full-size side-by-side footprint
• Counter-depth models: often still 36 in. wide, but shallower front-to-back
• Door swing clearance: can add 1 to 3 inches of space needs depending on hinge and handle style

Use a tape measure and capture both the appliance and the opening.

• Measure cabinet width across the main box (not the doors)
• Measure door-to-door width at the widest point
• Measure with handles if your unit has protruding handles
• Measure the opening width between cabinets
• Leave side clearance for airflow (use the manual’s clearance specs)

Width affects more than fit. It impacts door swing, airflow clearance, and whether you can remove bins and drawers without hitting adjacent cabinets. Checking the model-specific spec prevents surprises during delivery or a kitchen remodel.

Last updated: February 2026

Most Kenmore refrigerators, including side-by-side models like 79551313014, typically last 10 to 15 years with normal use and basic maintenance. Units that get regular cleaning, stable temperatures, and quick repairs often reach the high end of that range.

A refrigerator’s life is mostly determined by heat management, door sealing, and how hard the cooling system has to work.

• Condenser coil cleanliness (dirty coils run hotter and longer)
• Door gasket condition (air leaks cause long run times and frost)
• Room temperature and ventilation around the cabinet
• Ice maker and dispenser use (more moving parts, more wear)
• Power quality (surges can damage controls)

We recommend following the care and cleaning schedule in the 79551313014 owner's manual. Also focus on these practical steps:

• Set fresh food to about 37°F and freezer to about 0°F
• Leave space for airflow behind and above the refrigerator
• Clean spills and dry moisture to prevent odors and corrosion
• Keep the ice bin and chute clear to avoid jams
• Address water puddles quickly (often a drain issue)

A refrigerator that runs longer than necessary wears out the compressor, fans, and controls faster. Simple upkeep reduces run time, helps temperatures stay stable, and delays expensive repairs.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 79551313014, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment, typically along a side wall near the front. Use the same label to record the serial number.

Look for a white or silver sticker with a barcode and printed model and serial information:

• Inside the refrigerator section on the left wall near the top shelf area
• Inside the refrigerator section on the right wall near the crisper area
• On the ceiling of the refrigerator compartment near the light housing
• Along the door frame (hinge side) when the refrigerator door is open
• Less common: inside the freezer compartment on a side wall

For diagrams and the exact label callout for your unit, use the 79551313014 owner's manual.

We recommend copying the information exactly as shown so you get the right Kenmore refrigerator parts the first time.

Kenmore model numbers can be very similar, and small differences change which parts fit (for example, an ice maker assembly, auger motor, or electronic control board). Using the correct model number helps us match the right components for your dispenser, cooling system, and door hardware.

• Write the model and serial number exactly as printed (include all digits)
• Take a clear photo of the label for reference
• If the label is smudged, wipe gently with a damp cloth and dry it
• Use the model number first, then confirm with the serial number if needed

Last updated: February 2026