How do I tell what model Kenmore stove I have?
For a Kenmore range, the model number is printed on the appliance’s identification plate. On Kenmore model 79096002604, the manual specifies that the ID plate is on the right side of the oven front frame, inside the storage or warmer drawer compartment (check the bottom area of that compartment). See the 79096002604 owner's manual for the exact location diagram.
- Pull out the storage drawer or warmer drawer and look on the right side of the front frame.
- Check the bottom area of the drawer compartment for the ID plate.
- Write down both the model number and serial number; you often need both for parts lookup.
- If the label is greasy or faded, wipe it gently with a damp cloth and a little dish soap, then dry.
Knowing your exact Kenmore model number (for example, 79096002604) lets us match the correct parts and diagrams for your electric range.
| What you need | Why it matters | Example |
|---|---|---|
| Model number | Identifies the exact design and parts list | 79096002604 |
| Serial number | Helps confirm production details and compatible revisions | Varies by unit |
| Product type | Narrows parts category (electric range vs. gas range) | Electric range |
- Use the model number for parts ordering; it is usually the longest number on the plate.
- Ignore short codes that look like paint, color, or internal factory codes.
- If your model starts with 790, keep the full number including the last digits.
Kenmore ranges share many similar-looking parts (bake element, surface element control switch, oven temperature sensor), but small model differences can change fit and wiring. Using the exact model number prevents wrong-part returns and repeat repairs.
Last updated: January 2026
What was the size of the Kenmore 79096002604 oven?
The Kenmore 79096002604 is a freestanding electric range, but “size” can mean the oven cavity capacity (cubic feet) or the exterior dimensions (width, height, depth). For exact measurements for your specific unit, use the specs and installation clearances in the 79096002604 owner's manual and the 79096002604 installation guide.
Use these quick checks so you get the right measurement for cabinets, countertops, and replacement parts.
- Exterior width: most freestanding ranges are about 30 inches wide
- Overall height: typically around 36 inches to the cooktop (leveling legs can change this)
- Depth: commonly 25 to 28 inches to the front of the oven door (handle can add more)
- Oven capacity: usually listed in cubic feet in the specifications section
- Cutout and clearance requirements: listed in the installation instructions (critical for safe fit)
The dimensions in the referenced auction appear to be for a different Kenmore 790-series model (a dual-oven unit). Kenmore model numbers in the 790 family share design traits, but dimensions and oven capacity can vary by configuration (single oven vs. double oven, storage drawer vs. lower panel, handle style).
You can confirm you are measuring the correct model and then match the specs.
- Check the model and serial tag on the oven frame (often behind the storage or warmer drawer area)
- Match the model number exactly: 79096002604
- Use the manual’s specifications and the installation guide’s cabinet opening and clearance section
| Measurement | Typical freestanding electric range range |
|---|---|
| Width | ~29 7/8" to 30" |
| Cooktop height | ~36" (adjustable) |
| Depth (without handle) | ~25" to 28" |
Correct oven size prevents installation problems (door clearance, anti-tip bracket alignment, electrical cord strain) and helps you choose compatible accessories and parts like a range bake element 316075103 or frigidaire range oven temperature sensor 316490000.
Last updated: January 2026
Who makes Kenmore 79096002604?
Kenmore model 79096002604 is a Kenmore electric range built for Kenmore by Frigidaire (Electrolux/Frigidaire platform). The key clue is the 790 model prefix used on many Kenmore ranges that were manufactured by Frigidaire; you can confirm the full model and serial on the ID plate location shown in the 79096002604 owner's manual.
We recommend verifying the full model number directly from the appliance identification plate so you are matching the correct parts and wiring.
- Pull out the storage or warmer drawer.
- Look on the right side of the oven front frame for the identification plate.
- Confirm the model reads 79096002604 (not a close variation).
- Record the serial number too; it helps when comparing revisions.
- Use that exact model number when ordering parts like a bake element, surface switch, or temperature sensor.
Kenmore is a brand; different manufacturers built Kenmore appliances over the years. For ranges, the 790 prefix is widely associated with Frigidaire-built Kenmore units.
| What you see | What it tells you | Why it matters |
|---|---|---|
| Model starts with 790 | Commonly Frigidaire-built Kenmore range | Parts, wiring layouts, and error codes align to that platform |
| Full model 79096002604 | Your exact configuration | Ensures correct fit for elements, sensors, overlays, and door parts |
Manufacturer platform affects part fit and diagnostics. For example, if your oven will not heat or temperatures are off, common Frigidaire-platform checks include the bake element, broil element, and oven temperature sensor.
- Bake not heating evenly: consider the range bake element 316075103
- Temperature swings or error symptoms: consider the oven temperature sensor
- Burner not regulating: surface element control switch may be involved
- Display or keypad labeling issues: control overlay may be involved
For fault displays and diagnostic patterns commonly used on this platform, use the Kenmore 790 self-cleaning range error codes reference.
Last updated: January 2026
How to reset Kenmore oven model 79096002604?
To reset a Kenmore range model 79096002604, turn the range OFF, then restore power by switching the range circuit breaker OFF for 1 minute and back ON. After power returns, reset the clock and any oven settings, because the control clears during a power interruption.
- Turn all surface element knobs to OFF.
- If the oven is running, press OFF/CANCEL (if available) and confirm the display stops.
- Switch the 240V range breaker OFF (or remove the range fuses).
- Wait 60 seconds.
- Switch the breaker ON.
- Set the clock, then test Bake and Broil.
This model can lock the oven door and disable control pads. If you see “LOC”, cancel lockout first.
- Press and hold the oven lockout pad for 3 seconds.
- Wait for the Door Locked light to stop flashing and the door to unlock.
- Try normal operation again.
| Symptom | Reset often helps | Likely needs troubleshooting/parts |
|---|---|---|
| Control panel frozen or unresponsive | Yes | If it returns quickly |
| Wrong time after outage | Yes | No |
| Oven not heating to temp | Sometimes | Bake element, sensor, wiring |
| “LOC” showing | No (use lockout cancel) | Door lock system |
If the oven still will not heat after a reset, common checks include the range bake element 316075103 and the frigidaire range oven temperature sensor 316490000.
A power reset clears minor control glitches and is the correct first step after a power failure. Your range can resume operation when power returns, so resetting the clock and confirming the oven is OFF helps prevent unexpected heating.
For control features and lockout details specific to this model, use the 79096002604 owner’s manual.
Last updated: January 2026




