Kenmore 66513032K113 undercounter dishwasher Parts

Yes. You can still get replacement parts for Kenmore dishwashers, including model 66513032K113. The key is matching parts to your exact model number so the fit, electrical connections, and mounting points are correct; this is especially important for items like pumps, valves, and controls.

How to make sure you order the right part

Use your model number (66513032K113) and confirm the part by name and ID. We also recommend checking the diagrams and part lists in the 66513032K113 owner's manual.

• Match the full model number on the rating label, not just “Kenmore dishwasher”
• Compare the part name and part ID, not only the description
• Check whether your dishwasher is hardwired or uses a power cord before ordering electrical parts
• If you are fixing a leak, identify the leak location first (door area vs. under the unit)
• If you are fixing a drain issue, confirm whether the unit hums, drains slowly, or does not drain at all

Common Kenmore dishwasher parts that are still available

For 66513032K113, these are examples of commonly replaced parts that are typically stocked:

Symptom	Part that often fixes it	Example for this model
Dishes not drying, water not heating	Heating circuit issue	Dishwasher heating element W10518394
Won’t drain or drains poorly	Drain system problem	Dishwasher drain pump (varies by model)
Not filling or fills slowly	Water supply problem	Dishwasher water inlet valve (varies by model)
Leaking at the door	Door sealing problem	Dishwasher door seal kit (varies by model)

Why it matters

Kenmore dishwashers are built by major manufacturers, and many parts are shared across platforms, but the exact version used in 66513032K113 can differ by revision. Using the correct model-matched part helps prevent repeat failures, leaks, and wiring mismatches.

Helpful install and safety notes (when replacing parts)

If you are installing or reinstalling the dishwasher after a repair, follow the 66513032K113 installation guide for key requirements such as a grounded electrical supply, proper clearances, and securing the dishwasher so it does not shift when the door opens.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513032K113 is usually worth it when the problem is a common wear item (drain hose, inlet valve, door seal, heating issue) and the repair cost stays well below the price of a replacement. It is less worthwhile when multiple major components fail at once.

Quick rule of thumb we use

• Repair when the fix is a single part and labor is straightforward.
• Replace when the tub is damaged, the unit has repeated leaks, or you are stacking multiple expensive repairs.
• If the dishwasher is cleaning well and only has one symptom (not draining, not heating, leaking at the door), repair is typically the better value.

Costs and “value” comparison

Scenario	Typical repair scope	Usually worth it?
Not draining	Clear blockage or replace drain pump	Often yes
Not filling	Check supply, replace inlet valve	Often yes
Poor drying / no heat	Test and replace heating element	Often yes
Leaking at door	Replace door seal/strike kit	Often yes
Multiple symptoms	Pump, control, wiring, and seals	Often no

Parts that commonly make a repair economical

These are frequent, targeted fixes for 66513032K113 that can restore performance without replacing the whole dishwasher:

• Dishwasher heating element W10518394 (heating and drying issues)
• Dishwasher drain pump WPW10348269 (standing water, no drain)
• Dishwasher water inlet valve WPW10327249 (won’t fill or fills slowly)
• Dishwasher door seal and strike kit W10542314 (door-area leaks)
• Dishwasher filter W10872845 (poor cleaning from restricted flow)

Why it matters

This dishwasher is designed to clean with spray-and-soak pauses, so cycles can be longer by design. If you replace the right failed part and keep water flow and filtration in good shape, you usually get years of additional service without the cost and hassle of a full replacement.

Before you decide: 5 checks that prevent unnecessary repairs

• Confirm the water supply is turned on and the cycle is set correctly.
• Verify the drain hose routing is not kinked or blocked.
• Clean the filter and check the sump area for debris.
• Make sure the dishwasher is level and secured so the door seals evenly.
• If the unit may have been exposed to freezing, address that first (frozen lines can mimic failures).

For model-specific operating checks and installation requirements (leveling, securing brackets, drain routing), use the 66513032K113 installation guide.

Last updated: February 2026

The model number for your Kenmore undercounter dishwasher is printed on the appliance’s model and serial tag. On most Kenmore dishwashers like model 66513032K113, you will find that tag on the tub frame around the door opening; check the left or right side edge after you open the door.

Where to look first

Check these common locations in this order:

• Along the inner door frame (tub opening), left side
• Along the inner door frame (tub opening), right side
• On the top edge of the tub opening under the countertop lip
• On the side of the door itself (near the hinge area)

What the tag looks like and what to copy

The tag usually lists several identifiers. Copy the model number exactly as shown.

Label item	What it’s used for	Example format
Model number	Correct part fit and diagrams	66513032K113
Serial number	Production run details	Letters and numbers
Type/series (if shown)	Extra identification	Varies

Why it matters

Kenmore dishwashers often have similar-looking designs across multiple model numbers, but parts like a water inlet valve, drain pump, or electronic control can vary by revision. Using the exact model number helps ensure the right match when ordering parts or following repair steps.

Tip for ordering parts

Once you find the tag, match the model number character-for-character when selecting parts and diagrams. For model-specific documentation, use the 66513032K113 installation guide to confirm identification and installation details.

Last updated: March 2026