KitchenAid KHWS02RMT0 washer Parts

Yes. KitchenAid makes clothes washers, including the KitchenAid KHWS02RMT0, which is a front-loading automatic washer covered by a KitchenAid Use & Care Guide.

What this means for parts and repairs

If you own a KitchenAid washer like model KHWS02RMT0, you can maintain and repair it using washer-specific replacement parts and the model’s documentation.

• Use the model-specific owner's manual for operating instructions, care, and feature details.
• Common wear items on front-load washers include the door boot, door lock, and water inlet valve.
• Leaks at the door opening often point to the door boot or its clamp.
• Door not latching or stopping mid-cycle often points to the door lock or door strike.
• No fill or slow fill often points to the inlet valve or flow meter.

Common KitchenAid KHWS02RMT0 parts customers replace

These are examples of parts available for this model that often relate to everyday symptoms:

Symptom	Likely area to check	Example part for KHWS02RMT0
Water leaking from the door	Door seal and clamp	Washer door boot WP8182119
Door will not lock or unlock	Door latch system	Washer door lock assembly WP8182634
Washer will not fill or fills slowly	Water supply and valve	Washer water inlet valve WP8181694

Why it matters

KitchenAid washers use model-specific components and procedures. Matching parts to the exact model number (KHWS02RMT0) helps ensure proper fit, correct electrical connections, and reliable performance after the repair.

Last updated: February 2026

The main parts of a washing machine handle filling, washing, draining, spinning, and keeping the load balanced. On your KitchenAid KHWS02RMT0 front-load washer, key systems include the water inlet components, stainless steel drum, suspension (springs and shock absorbers), drain pump, and electronic controls (see the owner's manual).

Main parts and what they do

• Water inlet system: brings hot and cold water into the washer; commonly includes an inlet valve and flow sensing.
• Wash basket and outer tub: the stainless steel drum holds clothes; the outer tub contains water during washing.
• Dispenser system: routes water through detergent, bleach, and softener compartments for timed dispensing.
• Drive and control system: motor and control boards manage tumble and spin speeds.
• Drain system: pump and hoses move used water out to the household drain.
• Suspension system: springs and shock absorbers reduce vibration and help correct off-balance loads.
• Door system: door boot (gasket), clamps, strike, and lock keep the door sealed and safely locked.

Common KHWS02RMT0 parts you may replace

Symptom	Likely system	Example part for this model
Water leaking at the door	Door seal system	Washer door boot WP8182119
Door will not lock or unlock	Door lock system	Washer door lock assembly WP8182634
Washer will not fill or fills slowly	Water inlet system	Washer water inlet valve WP8181694
Excessive vibration or “walking”	Suspension system	Shck absorbr WP8182703
Won’t drain or drains slowly	Drain system	Water pump 280187

Why it matters

Knowing which system matches your symptom helps you choose the right repair path. For example, a door leak usually points to the door boot or clamp, while vibration issues often trace back to the shocks or springs.

Quick tips before you order parts

• Match the symptom to a system (fill, wash, drain, spin, door seal).
• Check for simple causes first (overloading, uneven load, kinked hoses).
• Use only HE detergent in this high-efficiency front-load design.
• Confirm part fit by model number KHWS02RMT0.

Last updated: February 2026

A front-load washer like KitchenAid model KHWS02RMT0 is built around a wash drum and tub, a water fill system, a drain system, and electronic controls. This model also uses a suspension system (springs and shock absorbers), smart dispensers, and a heating element to improve cleaning and reduce vibration (details in the KHWS02RMT0 owner's manual).

Main parts you will commonly see

• Wash drum and outer tub: the stainless steel drum holds clothes; the outer tub holds water around the drum
• Door system: door boot (gasket), clamps, door lock, and door strike keep the door sealed and locked
• Water fill system: inlet valve and flow meter control and measure incoming hot and cold water
• Drain system: drain pump and hoses move water out of the washer
• Suspension system: springs and shock absorbers reduce “walk” and off-balance movement
• Controls and electronics: control boards and sensors manage cycles, water level, and spin speed
• Dispenser system: multi-compartment dispenser routes detergent, bleach, and softener into the wash

KHWS02RMT0 parts examples (from the parts list)

System	What it does	Example part on this model
Door seal	Prevents leaks at the door opening	Washer door boot WP8182119
Door locking	Locks door during operation	Washer door lock assembly WP8182634
Water fill	Lets water into the washer	Washer water inlet valve WP8181694
Drain	Pumps water out	Water pump 280187
Vibration control	Reduces shaking during spin	Shck absorbr WP8182703

Why it matters

Knowing which system a symptom belongs to speeds up troubleshooting. For example, leaks at the front usually point to the door boot or clamps, while no fill points to the inlet valve or flow meter, and no drain points to the pump or tub-to-pump hose.

Quick troubleshooting match-ups

• Water on floor at the door: inspect the door boot for tears and check both boot spring clamps
• Door won’t lock or unlock: check the door lock assembly and door strike for damage or looseness
• Washer won’t fill or fills slowly: check inlet screens, then suspect the inlet valve or flow meter
• Washer won’t drain: check for clogs in the tub-to-pump hose and then the drain pump
• Excessive vibration: check load size, leveling, then inspect shocks and suspension springs

Last updated: February 2026

For a KitchenAid KHWS02RMT0 washer and a typical household dryer, you need installation supplies (hoses, drain hookup, and dryer venting or gas/electrical connection) plus any washer-specific replacement parts required by your situation. Use the KHWS02RMT0 owner's manual to match your drain method and spacing.

What you usually need to buy (installation supplies)

• Two hot and cold water fill hoses sized to reach your faucets
• A drain connection that matches your setup (standpipe, laundry tub, or floor drain)
• A level and basic hand tools for leveling and securing the washer
• Dryer vent duct and vent clamps (for vented dryers)
• Dryer power cord (electric dryer) or gas flex line (gas dryer)
• Optional: stacking kit or pedestal if your laundry space requires it

Washer parts you might actually replace on KHWS02RMT0

If you are repairing leaks, draining problems, or door issues during setup, these model-specific parts are commonly involved:

• Washer water inlet valve WP8181694 (filling problems, leaking at the valve)
• Washer tub-to-pump hose WPW10467168 (leaks under the washer, drain flow issues)
• Clamp WP285655 (securing hoses to prevent leaks)
• Washer door boot WP8182119 (front-load door seal leaks, mildew damage)
• Washer door lock assembly WP8182634 (door won’t lock, cycle won’t start)

Quick match: symptom to part (washer)

What you’re seeing	What to check first	Common related part
Won’t fill or fills slowly	Faucet screens, hose kinks, valve	WP8181694
Water on floor during drain	Hose cracks, loose clamp	WPW10467168, WP285655
Leak at door	Torn or warped door seal	WP8182119
Door won’t latch/lock	Strike and lock alignment	WP8182634

Why it matters

Buying the right installation supplies prevents leaks and poor draining, and choosing the correct KHWS02RMT0 replacement parts keeps you from redoing the job. The manual also covers water pressure, outlet location, and closet spacing so the washer runs without excessive vibration.

Last updated: February 2026