Whirlpool Washer Drain Pump Assembly 280187

Basic information

• Part name: Washer drain pump assembly
• Manufacturer: Whirlpool
• Category: Washer pumps and drainage parts
• Primary function: Pumps water out of the washer during the drain cycle.

Installation & compatibility

• Compatible models: Fits select Whirlpool, Kenmore, Kenmore Elite, KitchenAid, Maytag and Amana washers; confirm compatibility using your models parts diagrams.
• Installation difficulty: Medium; requires accessing the pump at the base of the washer and reconnecting hoses and wiring
• Tools required: Phillips screwdriver, pliers, work gloves

Additional information

Drain pump assembly 280187 removes water from the washer tub during the drain portion of the cycle. The pump connects to the drain hose and moves water out of the washer so the cycle can continue to spin.

If the washer will not drain, stops before the spin cycle, or leaves water standing in the tub, the drain pump may be worn or blocked. You may also hear unusual noise from the pump area or notice slow draining during the cycle.

Unplug the washer before starting the repair. Shut off the water supply and access the pump from the lower front or bottom of the washer cabinet. Disconnect the hoses and wiring harness, install the replacement pump in the same position, and secure all connections before restoring power.

Drain pump assembly 280187 replaces part numbers 8182821, 8182819, 285998, 8181684.