Owner’s manual
Error Codes
How many cubic feet is my Kenmore Elite refrigerator?
Your Kenmore Elite side-by-side refrigerator model 10659973801 is typically in the 25 to 27 cubic feet range for this style and cabinet width. For the exact rated capacity for your specific model, check the specifications section in the 10659973801 owner's manual.
We recommend verifying capacity from the model’s spec listing (not a similar-looking refrigerator), because small design changes can change the official cubic feet rating.
- Look for “Capacity”, “Total capacity”, or “Refrigerator/Freezer capacity” in the specs
- Use the full model number 10659973801 when comparing information
- If the manual lists separate sections, add fresh food + freezer for total capacity
- Ignore “usable space” estimates; use the rated cubic feet value
| Refrigerator type | Typical total capacity | Notes |
|---|---|---|
| Side-by-side (standard depth) | 22 to 27 cu. ft. | Narrower compartments, tall storage |
| French door (standard depth) | 25 to 30+ cu. ft. | Wider shelves, different layout |
Capacity affects how you shop for replacement parts and accessories (like shelves, bins, and the water filter), and it also helps when planning kitchen fit and airflow clearances. The manual also covers ventilation guidance and normal operation details that can impact real-world storage performance.
Last updated: January 2026
Is there a way to reset a Kenmore Elite refrigerator?
Yes. For Kenmore Elite model 10659973801, the most reliable reset is a power reset: turn the controls OFF (if your model has that setting), unplug the refrigerator, then reconnect power and reset the temperature controls to your normal settings. See the 10659973801 owner's manual for control details.
- Power reset (recommended): unplug the refrigerator for about 5 minutes, then plug it back into a grounded 3-prong outlet.
- Control reset: after power is restored, reset the refrigerator/freezer controls to the desired setting (the manual calls this out after reconnecting power).
- Dispenser motor reset (ice): if ice dispensing stops after holding the dispenser lever too long, wait about 3 minutes for the dispenser motor to reset.
A reset is useful for temporary control glitches, dispenser stalls, or after a power interruption. If cooling performance is poor, a reset alone usually will not fix an airflow, defrost, or sealed-system problem.
- Confirm the outlet has power (test with a lamp) and the cord is fully seated.
- Make sure the controls are ON and not set to OFF.
- Allow 24 hours for temperatures to stabilize after a restart or new installation.
- Verify doors close and seal; warm air leaks can mimic “not cooling.”
- Keep vents clear inside both compartments for proper airflow.
If the water dispenser or ice maker acts up after resetting, focus on supply and flow first.
| Symptom | Most likely cause | What to do next |
|---|---|---|
| No water from dispenser | Shutoff valve closed, kinked line | Open valve fully; straighten line |
| Weak water flow | Low water pressure | Confirm 30 to 120 psi supply pressure |
| Slow/poor dispensing | Clogged filter | Replace the genuine Kenmore refrigerator water filter EDR3RXD1 |
Resetting clears temporary electronic “hang-ups” and forces the control to restart normally. Following up with control settings, door sealing, and water supply checks prevents repeat issues and protects food temperatures.
Last updated: January 2026
What does er ff mean on Kenmore Elite refrigerator?
On Kenmore Elite refrigerator model 10659973801, the ER FF code points to a freezer airflow problem, most commonly the evaporator fan (freezer fan) not running correctly. When that fan cannot move cold air, the refrigerator section warms up even if the freezer seems cold.
- Make sure air vents inside the freezer and fresh food sections are not blocked by food packages.
- Confirm the doors close fully and the door gaskets seal all the way around.
- Listen for the evaporator fan: it typically runs when the compressor is running and the freezer door switch is pressed.
- Unplug the refrigerator for 5 minutes, then restore power to see if the code clears.
- If you recently loaded warm food or left doors open, allow 24 hours for temperatures to stabilize.
| Likely cause | What you notice | Typical next step |
|---|---|---|
| Evaporator fan issue (motor, blade, ice obstruction) | Little or no airflow from vents, warmer refrigerator section | Inspect fan area for ice buildup; check fan operation |
| Defrost system problem causing ice buildup | Frost or ice on freezer back wall, fan noise changes | Check defrost components and airflow |
| Control or wiring issue | Fan does not run even with good airflow path | Check connections; test components |
If you find heavy frost/ice buildup or the fan area is blocked, these model-compatible parts are commonly related:
The evaporator fan is what pushes freezer-made cold air into the refrigerator compartment. When airflow drops, food safety and temperature control suffer quickly, and the unit may run longer than normal.
Use the 10659973801 owner's manual for control operation, troubleshooting steps, and airflow guidance specific to this Kenmore Elite side-by-side.
Last updated: January 2026
