Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10656244400, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Open the refrigerator door and look along the interior side walls near the front.
How to find the label quickly
- Open the fresh food (refrigerator) door, not the freezer door
- Look on the inside wall, typically at eye level or slightly lower
- Check the left and right interior side walls near the front edge
- If you do not see it, look behind the crisper drawers (you may need to slide drawers out)
- Write down both the model number and serial number for parts lookup and service records
What you should record (and why)
The label includes key details we use to match the correct Kenmore parts and diagrams.
| Item on the label | What it’s used for | Example format |
|---|---|---|
| Model number | Ensures exact parts match your refrigerator design | 10656244400 |
| Serial number | Helps identify production run details | Letters and numbers |
| Purchase date (your notes) | Helpful for maintenance and service history | Month/day/year |
Why it matters
Kenmore model families can look similar, but shelves, water filters, ice maker parts, and door components can vary by model. Using the exact model number from the label helps prevent ordering the wrong part.
Helpful next step
For model-specific diagrams and identification notes, use the owner's manual.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common issues we see with Kenmore refrigerators like model 10656244400 are cooling problems, excess noise, water leaks, ice maker or dispenser trouble, frost buildup, and doors that do not seal or close well. Many of these start with airflow restrictions, dirty condenser coils, or door gasket sealing problems.
Common problems and what usually causes them
- Not cooling or warm temperatures: blocked air vents, doors opened often, controls set incorrectly, or dirty condenser coils
- Runs too much: warm room temperature, frequent door openings, large food loads, dirty condenser coils, or poor door sealing
- Noisy operation: normal operating sounds, or a fan area issue if the noise is new or loud
- Interior moisture buildup: humid room air, frequent door openings, blocked vents, or warm food added
- Door won’t close or is hard to open: drawers/shelves out of position, refrigerator not level, or dirty/sticky gaskets
For model-specific operating tips and the built-in troubleshooting checks, use the owner's manual.
Quick checks we recommend first (fast, no parts)
- Confirm the unit is plugged into a grounded 3-prong outlet and the breaker is not tripped.
- Make sure the refrigerator and freezer controls are not set to OFF.
- Check that air vents are not blocked by food packages.
- Clean the condenser coils to restore heat transfer.
- Close doors firmly and inspect the door gaskets for gaps, dirt, or stickiness.
- If you have digital controls and it is not cooling, turn the unit OFF then ON to reset.
Symptoms and likely fixes (at a glance)
| Symptom | Most likely cause | What to do first |
|---|---|---|
| Refrigerator warm | Airflow blocked, dirty coils, control setting | Clear vents; clean coils; verify settings |
| Runs constantly | Warm room, doors opened, dirty coils, gasket leak | Reduce door openings; clean coils; check gasket seal |
| Moisture inside | Humidity, frequent openings, blocked vents | Organize food; limit openings; clear vents |
| Door won’t close | Misaligned drawers, unlevel cabinet, sticky gasket | Re-seat drawers; level unit; clean gasket |
Why it matters
Cooling, run time, and moisture issues are often connected. When airflow is blocked or condenser coils are dirty, the compressor runs longer, temperatures drift, and you can get condensation, frost, and ice maker performance problems.
If you are troubleshooting ice or water issues, the Kenmore 106 model refrigerator error codes guide can help you narrow down control and sensor-related faults.
Last updated: February 2026
How to find discontinued appliance parts?
For Kenmore side-by-side refrigerator model 10656244400, the best way to find discontinued parts is to start with the model’s parts list and diagrams, then search by the exact part number and any approved substitutions shown in the owner's manual. If the original part is no longer available, we match by fit and function using model-based cross-references.
Best steps to locate a discontinued part
- Confirm the full model number: 10656244400 (from the rating label inside the refrigerator).
- Look up the part in the exploded-view diagrams and note the part number and description.
- Search using the part number first, then the part name (for example, “water inlet valve” or “door closer cam”).
- Check for substitute or replacement part numbers listed for the same location in the diagram.
- If the part is tied to water or ice, verify the related system parts (filter, tubing, valve) to avoid ordering the wrong item.
- If you are unsure, compare your old part’s markings and connector style to the replacement listing before ordering.
Common “still available” replacements for this model
Even when some items are discontinued, many high-wear parts for this refrigerator are often still orderable:
| What you’re fixing | Part to check first | Why it’s a common solution |
|---|---|---|
| Bad taste, slow water flow | Refrigerator water filter EDR3RXD1 | Clogged filters restrict flow and affect ice and water quality |
| No ice or no water dispensing | Refrigerator inlet valve W10822681 | A weak valve can stop water to the ice maker and dispenser |
| Door not closing smoothly | Refrigerator door closer cam WPW10329686 | Worn cams cause sagging and poor door closure |
| Frost buildup, warm freezer | Refrigerator defrost bi-metal WPW10225581 | Defrost failures lead to ice on the evaporator and airflow loss |
Why it matters
Using the exact model number and the correct part number prevents returns and repeat repairs. This is especially important on refrigerators because small differences in wiring plugs, water fittings, and mounting points can make a “close” part unusable.
Helpful related DIY guidance
- Use how to replace the water filter in a Kenmore refrigerator when you are troubleshooting water taste, slow dispensing, or ice maker fill issues.
Last updated: February 2026





