Kenmore 79071389700 gas range Parts

Your Kenmore gas range model number is printed on the appliance’s identification plate. For Kenmore model 79071389700, the manual specifies the plate is on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment; that label shows both the model and serial number (for example, 790.XXXX).

Where to look first (fastest checks)

• Pull out the storage drawer or warmer drawer and look at the right side of the oven front frame.
• Look for a sticker or metal plate that lists Model No. and Serial No.
• Wipe grease or dust off the label so the digits are readable.
• Write the full model number exactly as shown (numbers only, no spaces).
• Take a clear photo of the label for future parts ordering.

What the label typically looks like

Most Kenmore ranges list the model in a format like this:

Label field	What it means	Example you might see
Model No.	Identifies the exact range version for parts	790.71389700
Serial No.	Production code used for service history	Varies

Why it matters

We use the full model number to match the correct Kenmore gas range parts and diagrams. Even small model differences can change key items like the oven temperature sensor, burner components, control board, or door parts.

If the label is missing or unreadable

• Check the same drawer area again using a flashlight and looking along the frame edges.
• Look for a second label on the oven frame behind the door opening.
• If you can read only part of it (for example, “790.”), record every digit you can and compare it to your paperwork.

For additional label location details and diagrams, use the 79071389700 owner’s manual.

Last updated: January 2026

On Kenmore gas range model 79071389700, the model and serial number are printed on an identification plate located on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment. Use the plate information when ordering parts or requesting service; see the 79071389700 owner's manual.

How to find the identification plate

1. Make sure the range is cool and the oven is off.
2. Pull the storage drawer or warmer drawer straight out.
3. Look at the right-hand side of the oven front frame (the front frame area behind the drawer opening).
4. Record the model number, serial number, and any lot number/letter shown.

Quick checklist

• Check the storage drawer first (most common location)
• Look on the right side of the oven front frame
• Use a flashlight to read small print
• Write down the model, serial, and lot information
• Keep the info with your purchase records for future parts lookup

What you will see on the plate

Item on plate	What it’s used for
Model number	Ensures you get the correct Kenmore parts list
Serial number	Helps match production details for service
Lot number/letter	Helps narrow down version changes within the same model

Why it matters

Kenmore ranges can have small design changes within the same model family. Using the exact identification plate information helps us match the correct diagrams and parts, such as the frigidaire range oven temperature sensor 316490000 if you are troubleshooting oven temperature issues.

Last updated: January 2026

A Kenmore gas range like model 79071389700 typically lasts 15 years with normal household use. Regular cleaning to prevent grease buildup and keeping burners and the oven heating system operating correctly are the biggest factors in reaching that lifespan (see the 79071389700 owner's manual).

Typical lifespan and what affects it

Most gas ranges reach their full service life when heat, gas flow, and ignition stay consistent.

• Cleaning habits: grease buildup can create overheating and performance issues
• Burner performance: weak ignition or uneven flames increase wear on valves and igniters
• Oven temperature accuracy: frequent overheating or underheating strains components
• Ventilation: good airflow reduces heat stress on controls and wiring
• Usage level: daily high-heat cooking shortens life compared to moderate use

Maintenance checklist that helps you get the full 15 years

We recommend these routine steps for the Kenmore 79071389700 gas range:

• Wipe spills promptly and clean the range regularly to keep parts free of grease
• Keep burner ports clear; remove caps and heads and clean with a soft brush
• Confirm burners light promptly; normal ignition is within a few seconds after air is purged
• Watch for an oven that bakes unevenly; a drifting sensor can cause temperature swings
• Replace worn consumables (like the oven light bulb) before they cause secondary issues

Common “end-of-life” symptoms vs. repairable issues

Symptom	Most likely cause	Often repairable?
Oven temperature is consistently off	Temperature sensor drifting	Yes (often)
Oven takes too long to ignite	Igniter aging or gas flow issue	Yes
Burner flame is uneven or weak	Dirty burner head/cap or valve low setting	Yes
Door heat leaks, longer cook times	Worn door seal	Yes

If your oven temperature is inaccurate, the frigidaire range oven temperature sensor 316490000 is a common fix for this model.

Why it matters

A gas range that is clean and heating accurately cooks more evenly, uses fuel more efficiently, and puts less stress on the oven gas valve, igniter system, and electronic controls. That is what helps a 79071389700 reach the typical 15-year lifespan.

Last updated: January 2026

Kenmore model 79071389700 is made for Kenmore by Frigidaire (Electrolux/Frigidaire family). A quick way to confirm the manufacturer on Kenmore appliances is the model prefix; 790 is a Frigidaire-built prefix for ranges like this one.

How to confirm on your range

We recommend checking the identification plate on the appliance and matching the model number exactly.

• Pull out the storage or warmer drawer.
• Look on the right side of the oven front frame for the identification plate.
• Confirm the model number reads 79071389700.
• Note the 790 prefix, which indicates Frigidaire-built manufacturing for this Kenmore range line.
• Record the serial number for parts lookup and service history.

For the exact location and recording fields, use the 79071389700 owner's manual.

What the prefix means (quick reference)

Kenmore model prefix	Typical manufacturer family	What it helps with
790	Frigidaire / Electrolux	Parts compatibility, wiring layouts, burner and oven component families
970	Frigidaire / Electrolux	Same idea; common on some Kenmore cooking products

Why it matters

Knowing that 79071389700 is Frigidaire-built helps us match the correct style of parts (for example, oven sensors, igniters, and control components) and avoid look-alike parts that do not fit.

Example of a Frigidaire-family part used on this model

If you are troubleshooting baking temperature issues, a common related component is the frigidaire range oven temperature sensor 316490000.

Last updated: January 2026