GE CDWT980R10SS dishwasher Parts

On the GE CDWT980R10SS dishwasher, replacing the filter is a quick maintenance task: remove the lower rack, lift out the old filter from the sump area, seat the new filter, then twist it clockwise until it locks before reinstalling the rack. Use the CDWT980R10SS owner's manual for the exact filter location and orientation.

• Turn off the dishwasher and let the tub cool if it was recently running.
• Pull out the lower rack to access the sump area at the bottom.
• Remove the old filter (most GE filters lift out, then unlock with a short twist).
• Install the replacement filter and twist clockwise until it locks in place.
• Reinstall the lower rack and run a short rinse cycle to confirm normal wash action.

This model can use different filter components depending on the filter style installed. Match the part by comparing your existing filter to the part photo and mounting tabs.

If your current filter matches, use dishwasher filter WD22X10077 or dishwasher filter WD12X10109.

A clogged or damaged filter reduces water flow through the circulation system, which can cause poor cleaning, redepositing food soil, and longer cycle performance issues. Keeping the filter clean also helps protect the pump and spray arm.

• Make sure the spray arm holes are not blocked by debris.
• Use fresh dishwasher detergent and the correct amount for your water hardness.
• Avoid loading tall items that stop the spray arms from spinning.
• Confirm the hot water supply is working properly at the sink before starting a cycle.

Last updated: February 2026

The most common GE dishwasher problem is a no-start or won’t-run condition. On the GE CDWT980R10SS, we see this most often when the cycle is interrupted (door not fully latched, START/RESET pressed, or a brief power loss), which can trigger a drain and restart behavior described in the CDWT980R10SS owner’s manual.

• Confirm the door is fully closed and latched; a partially latched door can stop the cycle from running.
• Press START and allow the dishwasher time to respond; after an interruption it may drain before resuming.
• Check the home breaker or GFCI outlet (if used) and restore power if it tripped.
• If the START/RESET light is flashing, wait for the unit to finish draining, then restart a cycle.
• If the dishwasher has power but still will not run, look for an error indication and use the GE electronic dishwasher error codes reference.

Even when the dishwasher starts, these are the next most frequent complaints:

A “won’t start” complaint is often a simple interruption or latch issue, while draining, cleaning, and spotting problems usually trace back to installation (drain routing), loading, water temperature, or routine maintenance. Fixing the root cause prevents repeat failures and protects parts like the control module and pump.

Last updated: February 2026

Yes. You can buy replacement parts for a dishwasher, including for the GE CDWT980R10SS. Common replacements include door seals, filters, racks and baskets, fill and drain hoses, and pump or control components; matching parts to your exact model helps ensure proper fit and performance.

For the GE CDWT980R10SS, these are frequent wear or failure items we see customers replace:

• Door and tub sealing parts (to help stop leaks)
• Filters (to restore wash performance and reduce debris)
• Detergent dispenser parts (if the cup will not open or leaks)
• Fill and drain components (if it will not fill or will not drain)
• Pump, motor, and control parts (for no-wash, poor wash, or intermittent operation)

Here are a few examples of replacement parts that fit this model:

Use your model number (CDWT980R10SS) and confirm the part’s location and function in the diagrams.

• Match by exact model number first (not just brand or series)
• Compare the part name and where it installs (door, sump, tub, pump area)
• Check for related hardware you may need (clamps, screws, seals)
• If you are fixing a leak, replace the seal or gasket that matches the leak point
• If you are fixing a performance issue, clean the filter and spray arm passages before replacing parts

Dishwasher parts are designed around specific tub shapes, door geometry, and pump systems. Using GE CDWT980R10SS model-matched parts reduces leaks, improves cleaning and drying results, and prevents repeat repairs.

For safety and correct installation steps, follow the CDWT980R10SS owner’s manual and the CDWT980R10SS installation guide.

Last updated: February 2026

On the GE CDWT980R10SS dishwasher, the most commonly replaced parts are the door sealing parts, wash and drain components, and a few key control and safety items. These parts directly affect leaking, cleaning performance, draining, and whether the dishwasher will start and run normally.

• Door sealing parts: stop leaks around the door and tub opening (for example, a worn dishwasher door seal WD08X10055 or tub gasket)
• Filters: prevent debris from recirculating and clogging the pump (for example, dishwasher filter WD22X10077)
• Spray arm: restores wash pressure and spray coverage when jets clog or the arm cracks
• Drain parts: help the unit empty properly (drain pump, drain tube, drain hose)
• Detergent dispenser: fixes detergent cup not opening or poor detergent release
• Pump and motor assembly: addresses weak wash action, grinding noises, or no circulation
• Control parts: help resolve no-start, mid-cycle stopping, or odd behavior (control module, door latch related issues)

Replacing the right part first saves time and prevents repeat problems. For example, a clogged filter can mimic a failing pump, and a worn door seal can look like a tub leak.

• Confirm the symptom happens on more than one cycle.
• Clean the filter area and check for debris before replacing pump or drain parts.
• If the dishwasher is on a wall switch, turn it on and wait 5 to 10 seconds before pressing Start/Reset so the control can initialize (common on electronic controls).
• Avoid washing non-dishware items (filters, paint brushes) that can damage the dishwasher.
• Use the CDWT980R10SS owner’s manual for your exact control behavior, care guidance, and operating notes.
• If you’re seeing a code, use GE electronic dishwasher error codes to match the code to the most likely failure.

Last updated: February 2026