Kenmore 59679413410 refrigerator Parts

No. Refrigerators are not all 70 inches high; height varies by style and capacity. Many full-size French door and bottom-mount models land near the 68 to 70 inch range, but top-freezer, compact, and built-in units can be much shorter or much taller. For your Kenmore 59679413410, confirm the exact cabinet height and required clearances in the owner's manual.

Typical refrigerator height ranges (what we see most often)

• Top-freezer: commonly about 61 to 67 inches
• Bottom-mount: commonly about 67 to 70 inches
• Side-by-side: commonly about 65 to 71 inches
• Counter-depth freestanding: often similar height to standard-depth, but shallower
• Built-in: often 80 inches or taller

Don’t forget clearance space (it affects fit)

Even if the refrigerator height works, you also need room for airflow and door swing. The Kenmore 59679413410 installation guidance calls for:

• 1/2 inch of space on each side and at the top
• 1 inch of space behind the refrigerator
• Extra space behind if you have an ice maker (for the water line)
• 3 3/4 inches minimum between the refrigerator and a fixed wall so the door can swing open

Quick fit checklist before you buy or move a refrigerator

• Measure opening height, width, and depth in at least 3 spots
• Check for overhead cabinets and trim that reduce usable height
• Confirm whether you’re measuring to the top of the case or top of the hinge
• Plan for ventilation gaps (top, sides, and back)
• Verify door swing clearance near walls and islands

Common height comparison

Refrigerator type	Typical height	Notes
Top-freezer	61–67 in.	Often fits under more cabinets
Bottom-mount	67–70 in.	Many “tall” freestanding models
Built-in	80+ in.	Designed to fill tall enclosures

Why it matters

A refrigerator that is even 1 inch too tall can block ventilation, prevent leveling, or keep doors from opening fully. Using the model-specific clearance guidance helps prevent cooling problems and fit issues.

Last updated: February 2026

To tell what Kenmore refrigerator model you have, we look for the model and serial tag inside the fresh food compartment. On Kenmore bottom-mount units like model 59679413410, it’s typically on an interior side wall or near the crisper area; the exact location is shown in the 59679413410 owner's manual.

Where to find the model number tag

Check these common spots first (use a flashlight):

• Inside the refrigerator section on the left or right wall
• On the ceiling of the fresh food compartment
• Behind or beside the crisper drawers
• Along the door frame (hinge side) when the door is open
• On the kick plate area at the bottom front (less common)

What the model number looks like (and why it matters)

Kenmore model numbers are usually a number string with a dot (example: 596.########) or a longer number string (example: 59679413410). Your model number is the key to matching the correct parts list, diagrams, and troubleshooting info.

Quick guide

What you see on the tag	What it means for parts	What to do next
596.########	Kenmore model family identifier	Use the full number to search parts
59679413410	Full model number for your refrigerator	Use this exact number when ordering
Serial number	Production identifier	Not used to pick most parts

Tips to avoid ordering the wrong part

Use these checks before you buy a door gasket, light switch, or fan motor:

• Copy the model number exactly (include dots if shown)
• Match the full model, not just the first 3 digits
• If your tag includes a color code, keep it with the model number
• Compare the part name and part ID on the parts list to what you’re replacing

Why it matters

Kenmore refrigerators often share similar styling across different model families, but parts like a refrigerator door gasket, evaporator fan motor, or control board can vary by model revision. Using the exact model number keeps the fit and electrical connections correct.

Last updated: March 2026

On a Kenmore bottom-mount refrigerator like model 59679413410, the “bottom part” most people mean is the base area behind the lower front grille, where you typically find components such as the compressor, condenser fan, and leveling hardware. For model-specific component locations, use the owner's manual.

What you can find at the bottom of the refrigerator

Depending on the design, the lower section commonly includes:

• Compressor (the sealed pump that circulates refrigerant)
• Condenser fan motor (moves air across the condenser coils)
• Condenser coils (release heat from the refrigerant)
• Drain pan (catches defrost water for evaporation)
• Leveling screws and front rollers (used to stabilize the cabinet and help doors close)

“Bottom part” terms people use (quick guide)

What you call it	What it usually refers to	Why it matters
Bottom grille / base grille	The removable lower front cover	Access for cleaning and leveling
Compressor area	The machinery compartment near the floor	Cooling performance and noise
Bottom hinge	The lower door hinge hardware	Door alignment and sealing
Freezer drawer area	The bottom freezer compartment	Drawer sealing and smooth sliding

Why it matters

Knowing the right name helps you troubleshoot and order the correct replacement part. For example, if you are hearing a loud hum or the fridge is warm, the issue is often in the compressor or condenser airflow area, not the freezer drawer itself.

Helpful model-specific tip for 59679413410

Your refrigerator has two adjustable front leveling screws, one on each side of the base. If the cabinet feels unsteady or the doors do not close easily, adjusting those leveling screws can help (details are in the owner's manual).

Last updated: February 2026

Water under your Kenmore 59679413410 bottom-mount refrigerator is typically caused by a clogged or frozen defrost drain that overflows, a drain pan that is out of position or cracked, or a slow drip from the water supply or dispenser tubing connections. Use the checks below; the owner's manual shows connection and access details.

Quick checks (fast way to narrow it down)

• Unplug the refrigerator, then dry the floor and place paper towels under the front and rear.
• Check if the puddle appears after a defrost cycle (often every 8 to 12 hours).
• Look for water near the base grille after using the dispenser.
• Inspect the lower right rear area for drips at the water inlet connection.
• If doors were recently removed, confirm the dispenser tube connection is fully seated.

Most common causes and what to do

1) Clogged or frozen defrost drain

Defrost meltwater backs up and spills onto the floor.

• Remove items as needed to reach the drain opening.
• Flush with warm water using a turkey baster.
• Clear debris with a soft pipe cleaner (do not puncture plastic).
• Confirm water flows to the drain pan underneath.

2) Drain pan shifted, cracked, or overflowing

Water should collect in the pan and evaporate.

• Pull the unit forward and verify the pan is centered and intact.
• Clean dust from the condenser area to improve evaporation.

3) Water line or dispenser tubing leak

The manual emphasizes checking tubing connections for leaks.

• Inspect compression fittings; tighten snugly (do not overtighten).
• Make sure tubing is not kinked and has a service loop.

Symptom-to-cause guide

What you notice	Most likely cause	Best next step
Leak shows up after defrost	Drain restriction or pan issue	Clear drain; inspect pan
Water near base grille after dispensing	Dispenser tube connection	Reseat and tighten connections
Slow puddle all day	Supply line/fitting drip	Inspect and snug fittings

Why it matters

Stopping the leak prevents floor damage and keeps defrost water draining correctly so cooling performance stays consistent.

Last updated: February 2026