Kenmore 41739012891 washer Parts

For Kenmore washer model 41739012891, the model and serial numbers are printed on the washer serial plate located at the top, inside the door opening. Write both down exactly; they ensure you match the correct parts and instructions.

Where to look on model 41739012891

On this Kenmore front-load washer, check these spots in order:

• Top edge inside the door opening (primary location for this model)
• Door jamb area around the opening
• Just inside the front cabinet frame near the door opening
• Behind the door near the hinge side

For a diagram-style reference and recording instructions, use the 41739012891 owner's manual.

What to record (and how it helps)

Copy the information exactly as shown on the serial plate:

• Model number: identifies the exact washer design for parts lookup
• Serial number: helps match production changes when ordering certain components
• Purchase date: useful for maintenance and service records

Quick reference table

Label item	What we use it for	Example for this model
Model number	Correct Kenmore washer parts match	41739012891
Serial number	Version-specific part selection	Unique to your washer
Purchase date	Service and maintenance tracking	Your date

Why it matters

Kenmore washers can have multiple versions that look similar. Using the exact model and serial numbers prevents ordering the wrong door lock, bellows, water inlet valve, or control components.

Last updated: February 2026

On Kenmore washer model 41739012891, the F28 code means the washer’s main control is losing communication with the motor control, so the washer may stop tumbling or spinning until the connection and power supply are stable again.

What to do first (safe, quick checks)

• Unplug the washer (turning the controls to OFF does not remove power).
• Wait 2 to 5 minutes, then plug it back in.
• Run a Rinse/Spin or Drain/Spin to see if the code clears.
• Confirm the washer is plugged into a properly grounded 3-prong outlet.
• Do not use an extension cord or adapter plug.
• If a breaker tripped or a fuse blew, correct that first.

Common causes of an F28 communication error

• Loose, damaged, or oxidized connections in the wiring harness between controls
• Intermittent power, poor grounding, or voltage drop at the outlet
• Moisture or vibration affecting electrical connectors
• Failing motor control or main control electronics
• Excess vibration from an out-of-level installation stressing wiring

Parts that can be involved (symptom-based)

If the washer will not start and the door will not lock, fix the door lock issue first because the control system will not run the motor without a confirmed lock.

What you notice	What to check first	Example part for this model
Door will not lock, won’t start	Door lock and its wiring	Safety lock 131763256
Heavy banging or walking	Suspension and leveling	Level shock 5304485917
Code appears after moving the washer	Harness connections and strain	Inspect wiring routing and connectors

Why it matters

The control-to-motor communication path is required for speed control and direction changes. When that signal drops out, the washer protects itself by stopping the drive system and posting F28.

Where to verify the exact reset and electrical requirements

Use the safety, grounding, and installation requirements in the 41739012891 installation guide. For operating and safety basics (including power-disconnect guidance), use the 41739012891 owner’s manual.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use and basic maintenance. For the Kenmore 41739012891 front-load washer, keeping it level, avoiding overloads, and following the care guidance in the 41739012891 owner's manual helps you reach that expected lifespan.

Typical lifespan by use and care

Most washers wear out faster from heavy loads, frequent cycles, and vibration. Here’s a practical way to think about service life:

Usage pattern	What it looks like	Typical life expectancy
Light	2 to 3 loads/week	12 to 15 years
Average	4 to 7 loads/week	10 to 13 years
Heavy	Daily loads, bulky items often	8 to 11 years

What shortens washer life fastest

We see these issues reduce life expectancy the most on front-load washers:

• Running consistently overloaded loads (stresses the motor, bearings, and suspension)
• Operating unlevel (increases vibration and can trigger out-of-balance problems)
• Leaving the door closed between loads (promotes odor and residue buildup)
• Using too much detergent (creates excess suds and buildup)
• Ignoring early symptoms like banging, leaking, or a door that will not latch

Maintenance that adds years

These habits make the biggest difference over time:

• Level the washer and re-check after moving it; follow the 41739012891 installation guide
• Wipe the door boot and leave the door slightly open to dry after use
• Use the correct detergent amount for your water hardness and load size
• Wash small items in a mesh bag to reduce drain and pump strain
• Address vibration early; worn suspension parts can snowball into bigger repairs

Why it matters

A washer that is kept level and clean runs with less vibration, less moisture-related corrosion, and fewer strain events on the drive and tub system. That directly improves reliability and helps you avoid premature failures.

Last updated: February 2026