Home  >  Washer Drive Belt

Washer Drive Belt 134051000


Part #134051000

Online price
In Stock
For ZIP codes near Edit
This item is not returnable

Part Information

This drive belt (part number 134051000) is for washers.

Drive belt 134051000 connects the drive motor to the drive system in the washer to spin the basket.

The belt will be a tight fit. To install, place the belt groove side in around the motor pulley. While guiding the belt with one hand, turn the tub pulley with your other hand to allow the belt to roll completely around the tub pulley.

Unplug the washer before installing this part. Wear work gloves to protect your hands.


1-4 of 4 reviews
JL 235
Reviews 1Votes 1
• 3 years ago
JL 235• 3 years ago
Washer Drive Belt

Belt is 1/2 in. too short . Has all the same model numbers but old one is made in USA and new one was made in Brazil . That's the only difference . Can a Belt be stretch at all .

Too short belt
Canon City, CoReviews 1Votes 0
• 3 years ago
Too short belt• 3 years ago

The belt had the correct Sears part number on it but the wrong size number. It was 2-1/2 inches short. I had to reinstall the old belt. I have not call Sears back yet to see if they can find the correct size. Sears was very helpful finding a company to repair the circuit board that Sears no longer stocks.

not satisfied customer
Reviews 1Votes 0
• 2 years ago
not satisfied customer• 2 years ago
part number correct but part does not fit.

the part was sent to me twice. The first time even though part number was right the part did not fit. Called again told them the problem they authorized returning the part and promised to send the part with the same part number listed in their catalog but promised it will fit. The second time the part arrived and again it did not fit I called and asked them to authorize return I did return the part again and now I am without the part. I have to find a solution to get the washer going end of story.

Response from Sears PartsDirect:
SHS Social Care • 2 years ago

We’re sorry you had problems with the belt fitting your washer. The new drive belt is definitely a tight fit. If you order another one and it’s tight, these instructions might help: Place the belt groove side in around the motor pulley, then roll the belt onto the tub pulley by turning the pulley while you’re holding the belt on. Thanks!

San Jose, CaReviews 3Votes 1
• 3 years ago
JFK64• 3 years ago
Belt was too short

Size is not given so there is no way to know before ordering if it is correct for your machine. It was an inch or two too short for my washer and it would not stretch far enough to work. Refund was easy and the machine needed to be replaced anyway.

1-4 of 4 reviews