$48.10 |
9% OFF Phone Price : $53.10
CONFIRM THE PART FITS
Washer Outer Rear Tub (replaces 131462800) 131525500
Part #131525500
Online Only Price
$557.67 |
$10.00 OFF Phone Price : $567.67
In Stock
For ZIP codes near Edit
This part fits
Part Information
This outer rear tub (part number 131525500) is for washers.
Outer rear tub 131525500 fits around and supports the spin basket and attaches to the outer front tub, sealing water inside the washer.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $578.89 |$10.00 OFF Phone Price : $588.89
- $38.88 |24% OFF MSRP : $51.00
- $15.37
- $97.83 |9% OFF Phone Price : $107.83
- $343.29 |$10.00 OFF Phone Price : $353.29
- $23.23 |18% OFF Phone Price : $28.23
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #GWT445RFS0 Gibson washer | GWT445RFS0 | Tub & motor |
| Model #FWT445GCS0 Frigidaire washer | FWT445GCS0 | Tub & motor |
| Model #FWT445GC Frigidaire washer | FWT445GC | Tub and motor |
| Model #CRTR9300AS0 Frigidaire washer | CRTR9300AS0 | Wshr tub,motor |
| Model #WTF330HS0 White-Westinghouse washer | WTF330HS0 | Motor/tub |
| Model #LTF530FS1 Frigidaire washer | LTF530FS1 | Motor/tub |
| Model #FTF1240FS1 Frigidaire washer | FTF1240FS1 | Motor/tub |
| Model #WTF330HS1 White-Westinghouse washer | WTF330HS1 | Motor/tub |
| Model #GTF1040FS0 Gibson washer | GTF1040FS0 | Motor/tub |
| Model #FCCW3000FS1 Frigidaire washer | FCCW3000FS1 | Motor/tub |
Reviews
Part is spot on!
Had to replace the tub due to the bearing noise caused by a broken isolater on the bottom of the basket.
moc1166, OKC, OK
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
Fixed our problem, bearings worn out.
The difficulty with this installation is accessing all 23 bolts that hold the rear and front drum halves together. These bolts must be removed and put back from the front, which is a pain due to limited space for hands and tools. Some bolts were removed one click at a time with a ratchet. This whole process took approx. 9 hours, and I am not an inexperienced repair person. It is not necessary to remove the boot but you do need to remove the front panel and the two bottom weights to access the bolts. A second person is useful when aligning the two halves together to begin re-installing the bolts. Difficult, yes, but it saved me about $700. My machine is a 20 year old Frigidaire and I expect to get at least 15 more years out of it.
ToddInOR, Astoria, OR
6 people thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Could not install
Purchased part to repair 14 yr. old Kenmore front loader. Was not able to separate the inner tub form the outer tub assembly. Tried everything, ended up sending the part back and buying a new washer.
chris12, Undisclosed
3 people thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours