Kenmore 10659587990 side-by-side refrigerator Parts

For Kenmore model 10659587990, the most accurate way to get cubic-foot capacity is to use the specifications listed in the owner's manual. If you do not see capacity called out clearly, the model and serial label inside the fresh food compartment confirms the exact model so you can match the correct spec sheet.

Fast ways to find your refrigerator capacity

Use these checks in order; they prevent mix-ups with similar Kenmore 106-series models.

• Check the model and serial label on the inside wall of the refrigerator compartment; confirm it reads 10659587990.
• Look in the specifications section of the owner's manual for “capacity” or “cubic feet.”
• If the manual lists separate compartment volumes, add fresh food + freezer to get total cubic feet.
• If you are comparing sizes for a replacement, measure your opening and compare typical side-by-side sizes (see table below).
• If you are ordering parts, use the parts list for model 10659587990 first; for broader model searches, use Sears PartsDirect.

Typical capacity range (for planning only)

Most side-by-side refrigerators like Kenmore 106-series units commonly fall in this range; use the manual for the exact number.

What you need	Typical range for side-by-side refrigerators	Best source for exact value
Total capacity	20 to 26 cu. ft.	Owner's manual
Fresh food compartment	13 to 17 cu. ft.	Owner's manual
Freezer compartment	6 to 9 cu. ft.	Owner's manual

Why it matters

Capacity affects how you set expectations for food storage, airflow (do not overpack shelves), and accessory choices such as bins and ice storage. If you are troubleshooting ice production or water dispensing, confirming the exact model also helps you match the correct components, such as the ice maker assembly 4317943 or refrigerator inlet valve W10408179.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 33 to 36 inches wide; your Kenmore model 10659587990 is in that typical range. For the exact cabinet width and required clearances for your specific unit, use the measurements section in the owner's manual.

Typical width ranges (what you can expect)

Side-by-side refrigerator widths vary mainly by capacity and whether the unit is standard-depth or counter-depth.

• 33 in. class: common for smaller side-by-sides and tighter kitchens
• 36 in. class: most common full-size side-by-sides
• 42 in. class: larger, premium built-in style units (less common)

Don’t forget installation clearance

Even when you know the cabinet width, you still need space for airflow and door swing. Our manual for this style of Kenmore side-by-side calls out these common clearance targets:

• Allow about 1/2 inch on each side and at the top for ventilation
• Leave extra space behind the refrigerator if you have an ice maker water line
• If installed next to a fixed wall, allow about 2 inches minimum on the hinge side so the door can open fully

For the exact clearance guidance that applies to your kitchen layout, follow the owner's manual.

Quick sizing checklist (measure before you buy parts or move the unit)

Use a tape measure and record these numbers:

• Cabinet width (left to right, not including clearance)
• Height to the top hinge cover
• Depth to the back (and depth including handles)
• Door swing space (especially next to a wall)
• Water line space behind the unit (if using ice maker or dispenser)

Width vs. clearance (simple comparison)

What you’re measuring	What it tells you	Why it matters
Cabinet width	The refrigerator’s physical width	Confirms it fits the opening
Side clearance	Space around the cabinet	Helps ventilation and prevents rubbing
Hinge-side clearance	Space for door swing	Prevents doors from hitting a wall

Why it matters

Correct width and clearance prevent poor cooling from restricted airflow, reduce door alignment issues, and make it easier to service common components like the ice maker and water system. If you are troubleshooting ice or water issues while you measure, we also recommend our how to prevent water dispenser and ice maker problems guide.

If you need replacement parts while you are planning the fit, you can order model-specific parts from the list for Kenmore 10659587990, or search by model on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10659587990, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment. Use that full model number when ordering parts or looking up specifications in the owner's manual.

How to find it quickly

• Open the fresh food (refrigerator) door, not the freezer door.
• Look along the inside walls of the refrigerator compartment.
• Check near the crisper area and side walls where labels are commonly placed.
• Write down both the model number and serial number from the same label.
• Keep the information with your purchase records for future service and parts lookup.

What you will see on the label

The label typically includes both identifiers; the model number is what we use to match diagrams and parts.

Item on label	What it’s used for	Example for this unit
Model number	Matching the correct parts list and diagrams	10659587990
Serial number	Identifying the production run for service history	Varies by unit

Why it matters

Using the exact model number helps us match the correct Kenmore refrigerator parts for your configuration (ice maker, water filter system, door style, and internal shelving). That prevents ordering the wrong items, especially for common repairs like an ice maker or water inlet valve.

If you are ordering parts, you can also search by model number on Sears PartsDirect to pull up the correct parts list.

Last updated: February 2026

Water leaking from the bottom of your Kenmore 10659587990 side-by-side refrigerator usually comes from defrost water not draining into the drain pan (a clogged or frozen defrost drain) or from a water supply, ice maker, or dispenser leak that runs down and pools underneath. Use the 10659587990 owner's manual for model-specific locations and access steps.

Quick checks we recommend first

• Look for ice or standing water on the freezer floor; this points to a frozen or clogged defrost drain.
• Check the drain pan underneath for overflow and make sure it is seated correctly.
• Inspect the water line behind the refrigerator for kinks, rubbing, or loose fittings.
• If the leak happens after using the dispenser or ice maker, focus on the inlet valve, tubing, and filter housing.
• If water drips after dispensing, keep the cup under the chute 2 to 3 seconds after releasing the lever.

Most common cause: clogged or frozen defrost drain

During defrost, water should flow through the drain and into the drain pan. When the drain is blocked by ice or debris, water backs up, freezes, and eventually leaks out the bottom.

What to do

• Unplug the refrigerator.
• Remove items from the freezer floor and locate the drain trough area.
• Melt ice with warm water and clear the drain opening.
• Flush until water runs freely to the drain pan.

Water supply and dispenser related leaks

If the leak is tied to dispenser or ice maker use, check these common leak points:

• Refrigerator inlet valve W10408179 (can seep or not fully close)
• Refrigerator water tube 8201597 (can crack or leak at fittings)
• Refrigerator water filter housing WP2186443 (can leak if the filter is not seated or the housing is damaged)

Symptom	Most likely cause	What to check
Water under freezer, ice on freezer floor	Defrost drain issue	Clear drain and flush to pan
Leak only when dispensing	Water path leak	Inspect fittings and watch for drips
Dripping after dispensing	Air in lines or technique	Flush by normal use; hold cup longer

Why it matters

Bottom leaks can damage flooring and create ice buildup that restricts airflow, which reduces cooling performance.

For replacement parts for model 10659587990, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026