Kenmore 59675939404 refrigerator Parts

You can identify your Kenmore refrigerator model by finding the model and serial number tag on the cabinet liner or door area. On many Kenmore bottom-mount units, it is inside the fresh food section near a side wall, near the crisper area, or behind the lower toe grille.

Check these common locations first (use a flashlight and look for a sticker or metal plate):

• Inside the refrigerator compartment on the left or right side wall
• On the ceiling of the fresh food compartment (near the light)
• On the inside wall behind or beside the crisper drawers
• Along the door frame when you open the refrigerator door
• Behind the lower kickplate or toe grille at the bottom front
• On the back exterior panel (less common, but worth a quick check)

For this Kenmore bottom-mount refrigerator, the model number format is typically a long number string. For example, this page is for model 59675939404.

Once you find the tag, match the model number exactly (including every digit). Then use that model number when selecting parts like an ice maker, water inlet valve, or door gasket.

• Write the model number down exactly as shown
• Take a clear photo of the entire tag for reference
• Use the model number (not the brand name) when searching parts
• If your unit has an ice maker or water dispenser, confirm options match before ordering

Kenmore refrigerators often have multiple versions that look the same but use different components. Using the exact model number is the fastest way to get the correct replacement part the first time.

For additional help with display messages and diagnostics on Kenmore refrigerators, use our Kenmore 106 model refrigerator error codes reference.

Last updated: February 2026

Kenmore model numbers tell us who built the appliance and which design family it belongs to, which is how we match the right parts to your exact refrigerator. For Kenmore bottom-mount refrigerator model 59675939404, the 596 prefix identifies the manufacturing source, and the remaining digits narrow down the specific configuration.

We recommend checking these common locations first:

• Inside the fresh food compartment on a side wall
• On the ceiling of the refrigerator section near the light
• On the door frame behind the crisper drawers
• On a label near the bottom hinge area (fresh food door)
• On the back exterior panel (less common)

Kenmore model numbers are typically structured as a prefix + base model + variation digits. The prefix is the most important piece when you are identifying parts.

Even one digit off can change the door gasket, control board, or ice maker style. Before ordering, we recommend:

• Copy the model number exactly as printed (including any leading zeros)
• Use the full model number when searching parts, not just the prefix
• Compare the part description to your symptom (cooling, ice, water, lights)
• If you are troubleshooting water or ice issues, start with the refrigerator water inlet valve assembly WP2315576
• If you suspect an ice production failure, check the refrigerator ice maker D7824706Q

Kenmore appliances are built by multiple manufacturers, so the prefix (like 596) is the fastest way to get into the correct parts breakdown. Using the full 59675939404 model number helps ensure parts like the evaporator fan motor, damper control, and door gaskets fit and function correctly.

Last updated: February 2026

Most Kenmore refrigerators, including bottom-mount models like 59675939404, typically last 10 to 15 years. With consistent maintenance (airflow, clean seals, and timely repairs), it is common to reach the upper end of that range and sometimes beyond.

A refrigerator’s life is mostly determined by how hard the sealed system and cooling airflow components have to work day to day.

• 10 to 15 years: typical expected lifespan for most Kenmore refrigerators
• Longer life: steady temperatures, clean condenser area, good door sealing
• Shorter life: restricted airflow, dirty coils, frequent door openings, warm room location, ignored cooling issues

These are the highest-impact habits for a Kenmore bottom-mount refrigerator:

• Keep the condenser area clean and unobstructed so the compressor runs cooler.
• Make sure doors close fully and gaskets seal all the way around.
• Set stable temps (avoid extreme cold settings that force long run times).
• Fix frost buildup quickly (it can block airflow and warm the fresh food section).
• Address water leaks early to prevent corrosion and ice buildup.

When cooling performance drops, replacing the right part early can prevent bigger damage.

A refrigerator near the end of its lifespan often shows small warning signs first (long run times, temperature swings, frost, leaks). Catching those early helps protect food safety and can prevent compressor overwork.

For troubleshooting steps that match common Kenmore refrigerator symptoms, we recommend starting with how to prevent water dispenser and ice maker problems and how to fix your evaporator cooling fan.

Last updated: February 2026

A bad compressor in your Kenmore 59675939404 bottom-mount refrigerator usually shows up as poor cooling with the unit trying to run (humming, clicking, or running nonstop) but temperatures never recover. Before condemning the compressor, we rule out common look-alikes like airflow problems, a failed start component, or a defrost issue.

• Refrigerator and freezer both warm, even though the unit seems to be running
• Repeated clicking every few minutes (start attempt then shutdown)
• Compressor is very hot to the touch after running attempts (do not touch bare tubing)
• Little to no vibration or steady hum from the compressor when it should be running
• Condenser fan runs but cooling does not improve
• Frost pattern looks abnormal (for example, only a small patch of frost on the evaporator)

Many “bad compressor” complaints are actually caused by a few serviceable parts or conditions:

• Condenser coils and airflow: Dirty coils or blocked airflow can cause high head pressure and overheating.
• Evaporator fan operation: If the evaporator fan is not moving air, the refrigerator section warms up fast. If your fan is noisy or not running, the refrigerator evaporator fan motor WPW10128551 is a common fix.
• Defrost system problems: Heavy frost on the evaporator can choke airflow and mimic a sealed-system failure. A common defrost component is the refrigerator defrost bi-metal WPW10165425.
• Temperature sensing and controls: A bad sensor or control board can prevent proper compressor cycling.

Replacing a compressor is one of the highest-cost refrigerator repairs. Checking airflow, defrost, and control inputs first prevents replacing the wrong part and gets cooling restored faster.

Last updated: February 2026

Kenmore bottom-mount refrigerator model 59675939404 has a total capacity of 21.7 cubic feet. That total is the combined fresh-food and freezer interior volume and is the number to use when comparing size, storage, and replacement options.

• Confirm the model tag reads 59675939404 (usually inside the fresh-food section on a side wall).
• Use the total capacity (21.7 cu. ft.) when shopping for bins, shelves, or organizing accessories.
• If you are diagnosing performance issues, match parts by model to avoid fit and wiring differences.

Capacity is a volume rating, not usable shelf space. Usable space changes with options like an ice maker, drawer layout, and door bins.

Knowing the correct capacity helps you compare refrigerators accurately and set expectations for storage and temperature recovery after door openings. If you are troubleshooting cooling or airflow, using model-matched parts prevents fit issues; for example, the refrigerator evaporator fan motor WPW10128551 is a common airflow component on many bottom-mount designs.

Last updated: February 2026