Maytag PSD268LGEW-PPSD268LGW0 refrigerator Parts

Most Maytag refrigerators, including side-by-side models like PSD268LGEW-PPSD268LGW0, typically last 10 to 15 years with normal household use. With consistent cleaning, good airflow around the cabinet, and quick repairs when problems start, it is common to reach the upper end of that range.

What affects refrigerator lifespan the most

We see these factors make the biggest difference in how long a Maytag refrigerator runs reliably:

• Condenser cleanliness (dust buildup makes the compressor work harder)
• Ventilation space around the refrigerator (restricted airflow increases heat and wear)
• Door seal condition (air leaks cause longer run times and frost issues)
• Ice maker and water system health (leaks and clogs can create secondary damage)
• How quickly small symptoms are fixed (noise, warm temps, frost, puddles)

Typical lifespan by major system

These are practical, real-world expectations for common refrigerator components.

Component/system	Typical expectation	What you notice when it is failing
Sealed system and compressor	10 to 15 years	Warm fridge/freezer, long run times, clicking/humming
Ice maker and water inlet system	5 to 10 years	No ice, small cubes, leaking, slow fill
Door gaskets	5 to 10 years	Moisture, frost, warm spots, doors not closing easily
Lights and switches	3 to 7 years	Light stays off/on, door alarm issues (if equipped)

Maintenance that extends life (high impact)

Use this checklist to reduce compressor run time and prevent common side-by-side failures:

• Vacuum dust from the condenser area regularly.
• Keep doors closed as much as possible; avoid holding the door open while unloading groceries.
• Confirm doors seal tightly; replace worn gaskets when you feel air leaks.
• Replace the water filter on schedule; a restricted filter can reduce water flow to the dispenser and ice maker.
• Fix puddles and slow leaks quickly to prevent floor damage and corrosion.

If your unit uses a cartridge-style filter, the whirlpool everydrop 4 refrigerator water filter EDR4RXD1 is one of the filters listed for this model.

Why it matters

A refrigerator that runs longer to maintain temperature (because of dirty coils, air leaks, or water system issues) puts extra strain on the compressor and cooling system. Reducing run time is the most direct way to protect long-term reliability.

Last updated: February 2026

Maytag refrigerators such as model PSD268LGEW-PPSD268LGW0 typically do not have one universal reset button. Instead, we reset specific functions (controls, water filter light, ice maker) using a button sequence for that feature or by power-cycling the refrigerator.

Quick resets to try first (safe, no tools)

• Power reset (control glitch): unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Control lock: if the dispenser or buttons seem “dead,” press and hold the Lock key (if present) for 3 seconds.
• Water filter status light: press and hold the Filter Reset or Water Filter key for 3 seconds (label varies by dispenser style).
• Ice maker reset: turn the ice maker OFF for 30 seconds, then ON; allow 12 to 24 hours for normal ice production.

If the issue is ice or water related

Many “needs reset” symptoms are actually low water flow, a frozen fill tube, or a valve problem.

Common checks:

• Confirm the household shutoff valve is fully open.
• Inspect the supply line for kinks.
• Replace an overdue filter and purge air from the dispenser.
• Check for a frozen ice maker fill tube.

Helpful parts for this model:

• Whirlpool everydrop 4 refrigerator water filter EDR4RXD1
• Refrigerator valve WP12544002
• Refrigerator fill tube WPB5705307
• Refrigerator ice maker D7824706Q

What “reset” method matches your symptom?

Symptom	Most likely “reset”	What it addresses
Display or buttons acting odd after outage	Power reset (5 minutes off)	Clears minor control board glitches
Filter light won’t clear	Hold Filter Reset (about 3 seconds)	Resets filter status indicator
No ice after replacing parts/filter	Ice maker OFF then ON; wait 12 to 24 hours	Restarts harvest cycle and refills
Water dispenser sputters	Purge air by dispensing several cups	Removes trapped air after filter change

Why it matters

Using the right reset prevents unnecessary part replacement. For example, a filter light reset will not fix low water flow; that points to the filter, water line, or a water inlet valve.

Last updated: February 2026

For your Maytag side-by-side refrigerator model PSD268LGEW-PPSD268LGW0, the model number is typically on a sticker inside the fresh food compartment on the upper left frame, or on the underside/edge of the control panel area. Use that exact model number when ordering parts.

Where to look first (fastest checks)

• Open the refrigerator (fresh food) door and check the upper left interior frame
• Look along the ceiling area near the temperature controls
• Check the underside or edge of the control panel housing
• Scan the side wall near the crisper drawers for a rating label
• If the label is worn, use a flashlight and take a close-up photo to zoom in

What the label usually shows

Most Maytag refrigerator rating labels include:

• Model number (example format: PSD268LGEW-PPSD268LGW0)
• Serial number
• Electrical ratings (volts/amps)
• Sometimes a manufacturing date code

Why it matters

The model number is how we match the correct Maytag refrigerator parts to your exact configuration (ice maker, water filter housing, door gaskets, and dispenser components). Even small model-number differences can change which parts fit.

Common parts you may need after you confirm the model

Once you have the model number, these are common replacement items for this model family:

Part type	Example part on this model page	When you’d replace it
Water filter	Whirlpool everydrop 4 refrigerator water filter EDR4RXD1	Slow water flow, bad taste/odor
Ice maker	Refrigerator ice maker D7824706Q	No ice, small cubes, leaking ice maker
Door gasket	Gasket-ff W10840101	Warm spots, frost, door not sealing

For step-by-step help with filter changes, use our guide: how to replace the water filter in a Maytag refrigerator.

Last updated: February 2026

Most Maytag refrigerators fall into standard full-size dimensions; for a side-by-side like model PSD268LGEW-PPSD268LGW0, you can typically expect about 62 to 72 inches tall, 29 to 36 inches deep, and 30 to 36 inches wide. Measure your exact opening and door swing before ordering parts or planning a move.

How to measure your refrigerator space correctly

Use a tape measure and record all three dimensions; measure twice so you do not get surprised during delivery or reinstall.

• Width: wall to wall at the front, middle, and back of the opening
• Height: floor to the lowest cabinet or trim above
• Depth: back wall to the front edge of counters (then add door and handle clearance)
• Door swing clearance: space needed to fully open both doors and pull out bins
• Ventilation gap: leave space behind and above for airflow

Typical size ranges (quick reference)

These ranges cover most full-size Maytag side-by-side units.

Measurement	Typical range	Why you measure anyway
Height	62 to 72 in.	Hinges and leveling legs change final height
Width	30 to 36 in.	Cabinet cutouts vary; doors need clearance
Depth	29 to 36 in.	Handles and doors add depth beyond the cabinet

Why it matters

Correct sizing prevents installation headaches and helps performance. If the refrigerator is too tight in the opening, airflow can suffer and doors may not open far enough to access shelves, the ice bin, or the water filter area.

Related maintenance that affects fit and function

If you are working on water or ice issues while planning space, these model-matched parts are commonly involved:

• Refrigerator ice maker D7824706Q (ice production and harvesting)
• Refrigerator water filter housing WP12568001 (filter fit, leaks, and flow)
• Refrigerator valve WP12544002 (water supply to dispenser and ice maker)

For step-by-step filter guidance, use our DIY article: how to replace the water filter in a Maytag refrigerator.

Last updated: February 2026