Kenmore 66513889K800 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66513889K800. The key is matching parts to your exact model number so you get the correct fit and electrical ratings for items like the drain pump, water inlet valve, door seal, and heating element; check the 66513889K800 owner's manual for model-specific part and service details.

How to make sure you order the right part

• Use the full model number 66513889K800 (not just “Kenmore 665”).
• Match the symptom to the system: draining, filling, heating, leaking, or rack issues.
• Compare your original part’s markings to the replacement listing (especially for pumps and controls).
• If your dishwasher is leaking, inspect seals and hoses before replacing major assemblies.
• If it will not heat or dry, confirm cycle settings and water temperature first.

Common Kenmore dishwasher parts people replace

Here are examples of in-stock parts that fit Kenmore 66513889K800:

Problem area	Part you may need	What it affects
Not draining	Dishwasher drain pump WPW10348269	Removes water from the tub
Not filling	Dishwasher water inlet valve WPW10158389	Lets water into the dishwasher
Leaking at door	Dishwasher door seal W10542314	Seals the door to prevent drips
Poor drying or no heat	Dishwasher heating element W10518394	Heats water and supports drying

Why it matters

Kenmore dishwashers are built with serviceable components, so replacing the correct OEM-style part often restores normal washing, draining, and drying without replacing the entire dishwasher.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the appliance ID label, usually right inside the door opening on the inner door frame (top edge or along the sides). Once you find it, match it exactly (for example, 66513889K800) to get the right parts and troubleshooting info.

Where to look first (fastest checks)

• Open the door and inspect the inner door frame around the tub opening
• Check the top edge of the door (label can face upward)
• Look on the tub wall just inside the door
• If the label is worn, use a flashlight and look for faint stamped or printed characters

If you still cannot find the label

Try these common alternate locations:

• Behind the lower access panel (kickplate) area
• On the side of the cabinet frame near the front legs
• On the back of the dishwasher (more common if the unit has been pulled out)

For diagrams and model-specific identification details, use the 66513889K800 owner's manual.

Why the exact model number matters

Kenmore dishwashers often share similar styling across multiple series, but parts can differ by revision. Using the exact model number helps us match the correct items like the dishwasher heating element, dishwasher drain pump, dishwasher door seal, and electronic control.

Examples of parts that vary by model

Part type	What it affects	Example part for 66513889K800
Heating element	Drying and water heating	Dishwasher heating element W10518394
Drain pump	Draining performance	Dishwasher drain pump WPW10348269
Door seal	Leaks at the door	Dishwasher door seal W10542314

Quick tips to avoid mix-ups

• Copy the model number character-for-character (including all digits and letters)
• Do not use only the “665” prefix; use the full model like 66513889K800
• If you also have the serial number, keep it with your records for service history

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513889K800 is worth it when the fix is a common wear item or a single failed component; it is especially cost-effective if the tub is sound and the repair restores heating, draining, or filling without major labor.

Quick way we decide: repair vs. replace

Use these checkpoints before buying parts or scheduling service:

• Repair when the problem is isolated (no-heat, won’t drain, won’t fill, minor leak at the door).
• Repair when the dishwasher cleans well but has one failure (heater, drain pump, inlet valve, fuse).
• Replace when there are multiple major failures (control plus motor plus leaks).
• Replace when the tub or inner door panel is leaking from rust-through (that is a major structural issue).
• Repair when racks/rollers/seals are the main complaint and the machine otherwise runs normally.

For model-specific maintenance and troubleshooting steps, follow the 66513889K800 owner’s manual.

Typical repair costs: what’s “small” vs. “big”

Here’s a practical way to think about common dishwasher repairs for this Kenmore platform.

Repair type	Common symptom	Parts often involved	Usually worth it?
Heating issue	Water stays cool, poor drying	Dishwasher heating element W10518394	Yes
Drain issue	Standing water, won’t drain	Dishwasher drain pump WPW10348269 or drain hose	Often
Fill issue	No water entering	Dishwasher water inlet valve WPW10158389	Often
Door leak	Water at front corners	Dishwasher door seal W10542314	Yes
Control problem	Dead panel, erratic cycles	Electronic control	Depends on age and total condition

Why it matters

A dishwasher repair is usually a good value when it restores core functions (fill, wash, heat, drain) with one part and the unit is otherwise in good shape. The Kenmore warranty language for this style of dishwasher also highlights that some systems (like electronic controls and the wash system) may have extended parts coverage for a limited time from purchase, which can change the overall value of repairing.

Before you spend money: 5 fast checks

• Confirm the cycle and options you’re using (some cycles run longer and dry differently).
• Check for a clogged filter area and clear debris.
• Verify the drain hose routing (no kinks, proper high loop/air gap setup).
• Look for error codes and match them to symptoms using Kenmore 665 model dishwasher error codes.
• If the unit is completely dead, check the home breaker and then test the dishwasher’s fuse.

Last updated: February 2026

On Kenmore dishwasher model 66513889K800, a “dead” or unresponsive control panel is most often caused by the controls being locked, the door not fully latched (so START/RESUME will not engage), or a power interruption (tripped breaker or blown fuse). See the 66513889K800 owner's manual for the exact lock and restart steps.

Quick checks we recommend first

• Make sure LOCK ON is not lit; Control Lock disables all buttons.
• Close the door firmly; if Start/Resume is blinking, close the door and press START/RESUME.
• Check house power: reset the dishwasher breaker, and confirm the outlet (if used) has power.
• Cancel and restart: press CANCEL/DRAIN and let the 2-minute drain finish (door must be closed).
• If other lights blink and it still will not run, the issue is typically in the control circuit (wiring, keypad, or control).

Control Lock and “won’t start” behavior (model-specific)

This model uses a Control Lock feature that can make the panel look failed.

Symptom	What it usually means	What to do
LOCK ON light is lit	Controls are locked	Press and hold HEATED DRY for 4 seconds to toggle lock
Start/Resume light blinking	Door opened or not latched	Close door, press START/RESUME
No response at all	No power or failed control circuit	Check breaker, then inspect control components

When it points to a part problem

If power and lockout issues are ruled out, common failures include a blown control fuse or a failed electronic control.

• Fuse W10258275: protects the control circuit; a blown fuse can make the panel go dark.
• Electronic control WPW10285178: the main board; failure can cause no lights, random lights, or no button response.

Why it matters

A control panel that “stops working” is often a normal safety lockout (Control Lock or door not latched). Checking those first prevents unnecessary parts replacement and gets the dishwasher running faster.

Last updated: February 2026