Owner’s manual
View engine
Do Craftsman mowers use Briggs and Stratton engines?
Yes, many Craftsman mowers use Briggs and Stratton engines, and the Craftsman lawn tractor model 917272262 specifically uses a Briggs & Stratton engine (engine model 445777, type 0154-E1) as shown in the parts and engine information in the 917272262 owner's manual.
What this means for parts and service
Knowing the engine brand and model helps you buy the correct tune-up and fuel system parts and follow the right maintenance specs.
Common engine-related items you will match by engine model/type include:
- Air filter and pre-cleaner
- Spark plug
- Fuel filter and fuel line
- Carburetor parts (gaskets, jets, overhaul kits)
- Starter, alternator, and regulator components
Quick check: mower vs. tractor
Craftsman uses different engine suppliers across different product lines and years, so the right answer depends on the exact model number.
| Craftsman equipment | Engine brand | How to confirm fast |
|---|---|---|
| Riding lawn tractor (like 917272262) | Often Briggs & Stratton | Check the engine model/type in the manual or on the engine shroud |
| Walk-behind mower | Varies by model | Check the engine badge and the model tag |
Tips to identify your engine correctly
Use these identifiers before ordering engine parts:
- Tractor model number: 917272262
- Engine model number: 445777
- Engine type number: 0154-E1
- Engine label location: typically on the blower housing or valve cover area
Why it matters
Briggs & Stratton parts are frequently model- and type-specific. Matching the engine model and type prevents wrong-fit carburetor kits, gaskets, and ignition parts, and it speeds up troubleshooting when the tractor will not start.
Last updated: January 2026
How much does it cost to replace a riding lawn mower engine?
Replacing the engine on a Craftsman lawn tractor model 917272262 typically costs $260 to $1,800 installed, depending on the engine price, whether you replace related wear parts, and local labor rates. Most shops book around 6 hours of labor for a riding mower engine swap; confirm procedures in the 917272262 owner's manual.
What drives the total cost
- Engine price: new, rebuilt, or used engines vary widely.
- Labor time and shop rate: riding mower engine replacement is usually a half-day job.
- Extra parts: belts, pulleys, wiring, and hardware often get replaced “while you’re in there.”
- Fuel system cleanup: stale fuel or a dirty fuel filter can add time.
- Pickup/delivery: some service centers charge transport fees.
Typical cost breakdown (example ranges)
| Cost item | Typical range | Notes |
|---|---|---|
| Engine (part) | $150 to $1,400 | Biggest variable; depends on brand/HP/specs |
| Labor | $110 to $600 | Often based on ~6 hours total |
| Misc. parts and supplies | $0 to $200 | Belts, hardware, clamps, oil, filter |
Parts you may replace at the same time
If the old engine failed due to vibration, belt issues, or deck load, it is common to inspect and replace wear items so the new engine is not stressed.
- Ground drive belt (cracks, glazing, stretching): lawn tractor ground drive belt, 1/2 x 82-in 532140294
- Blade idler pulley (noisy, wobbly, seized): lawn tractor blade idler pulley 532177968
- PTO switch (intermittent engagement): pto switch 582107601
- Engine pulley (worn grooves, wobble): lawn tractor engine pulley 532175417
Why it matters
A correct engine replacement protects safety and reliability. The manual emphasizes not making adjustments or repairs with the engine running and keeping safety devices working properly; a rushed install can create starting, charging, or interlock problems.
Last updated: January 2026
What are the most common issues with 917272262?
The most common issues we see on the Craftsman 917272262 front-engine lawn tractor involve drive and deck belt wear, PTO engagement problems, steering looseness, and front-end wheel or tire issues. These problems usually show up as slipping, squealing, poor cutting, or hard-to-control steering.
Most common symptoms and likely causes
- Tractor will not move or slips under load: worn or stretched ground drive belt, misrouted belt, or a damaged drive pulley
- Mower deck will not engage: faulty PTO switch, loose wiring at the switch, or belt/idler issues
- Squealing or burning rubber smell: belt slipping from wear, debris in pulleys, or a sticking idler arm/spring
- Uneven cut or poor bagging: worn/damaged blades, deck belt tension problems, or idler pulley wear
- Loose steering or wandering: worn steering sector gear, drag link wear, or loose fasteners
- Front wheel wobble or flat tire: worn rim/bearing components, damaged tire, or leaking inner tube
Quick checks we recommend first
Before replacing parts, use the routing diagrams and adjustment procedures in the 917272262 owner's manual. Then check these basics:
- Inspect belts for glazing, cracking, fraying, or a narrowed profile
- Spin idler pulleys by hand; they should turn smoothly and quietly
- Verify the PTO switch clicks positively and the connector is tight
- Check steering linkage for play at the drag link and sector gear
- Confirm tire pressure and look for sidewall cracks or slow leaks
Parts that commonly solve these problems
If your symptoms match, these model-compatible parts are common fixes:
| Symptom | Common fix | Example part on this model page |
|---|---|---|
| No drive or slipping | Replace ground drive belt | Lawn tractor ground drive belt, 1/2 x 82-in 532140294 |
| Deck will not engage | Replace PTO switch | Pto switch 582107601 |
| Squeal, poor cut | Replace worn idler pulley | Lawn tractor blade idler pulley 532177968 |
| Flat front tire | Replace inner tube | Husqvarna lawn tractor tire inner tube 532059904 |
Why it matters
On a riding mower, a worn belt or idler pulley can quickly damage pulleys and reduce cutting performance. Catching belt, PTO, steering, and tire issues early helps prevent downtime and protects the deck and drivetrain.
Last updated: March 2026
