Kenmore 10659592993 refrigerator Parts

The Kenmore side-by-side refrigerator model 10659592993 size is defined by its exact total capacity (cubic feet) and cabinet dimensions (height, width, depth) listed in the 10659592993 owner's manual. Use that spec section, then measure your space to confirm fit and door clearance.

Use these items to match your kitchen opening and delivery path:

• Total capacity (cu. ft.): overall storage volume
• Width: cabinet width; note handles can add extra
• Height: floor to top of hinge area; leveling legs affect this
• Depth: cabinet depth; doors and handles change the “in-use” depth
• Clearances: space for airflow and door swing

Measure the opening first, then compare to the manual specs.

• Measure width, height, and depth in at least three spots (top, middle, bottom)
• Include baseboards, trim, and countertops that can reduce the opening
• If moving through a doorway, measure the narrowest point and compare to refrigerator width
• Plan for door swing so bins and shelves can open fully

Correct sizing prevents installation headaches, protects the water line to the dispenser, and helps avoid cooling issues caused by restricted airflow. It also helps when replacing interior storage parts like the refrigerator crisper pan WP2188656.

Last updated: January 2026

The most common issues we see with the Kenmore 10659592993 side-by-side refrigerator involve ice maker and water dispensing problems, warm temperatures from airflow or defrost faults, and door sealing or alignment issues that cause frost and temperature swings. Use the owner's manual for model-specific checks and settings.

• Ice maker not making ice: shutoff arm position, frozen fill tube, low water pressure, or a failing ice maker
• No water from dispenser: clogged filter path, frozen reservoir line, or a weak inlet valve
• Refrigerator warm but freezer cold: restricted airflow, iced evaporator, or evaporator fan issues
• Frost buildup or moisture: door gasket not sealing, door not closing squarely, or frequent openings
• Water puddles: defrost drain restriction or a leaking water line connection

1. Confirm temperatures: set refrigerator to about 37°F and freezer to about 0°F.
2. Make sure vents are not blocked by food packages.
3. Check door closing: look for gaps, torn gasket areas, or a door that “springs” back.
4. For ice and water: verify the household shutoff valve is fully open and the supply line is not kinked.
5. If cooling is weak: listen for the evaporator fan running when the freezer door switch is pressed.

These issues affect food safety, ice quality, and energy use. Fixing airflow, defrost, and water-supply problems early prevents heavier frost buildup, warm spots, and repeat ice maker failures.

For dispenser-related problems, our step-by-step guide on how to disassemble a Kenmore refrigerator dispenser helps you access common wear items safely.

Last updated: March 2026

For Kenmore side-by-side refrigerator model 10659592993, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment. Open the fresh food door and look along the interior side wall for a sticker or plate with both model and serial information.

• Open the refrigerator (fresh food) door, not the freezer door
• Look on the inside wall of the refrigerator compartment
• Check the upper side walls first, then scan downward
• Look for a label that lists Model and Serial
• Wipe condensation or smudges so the numbers are readable

We recommend recording these details exactly as shown on the label:

• Complete model number (for example, 10659592993)
• Serial number
• Purchase date (if you know it)

You can also confirm the label location and see other identification notes in the owner's manual.

Using the exact model number ensures you get the correct Kenmore refrigerator parts, diagrams, and troubleshooting steps. Even small model-number differences can change compatible items like an ice maker assembly, refrigerator inlet valve, or door gasket.

Last updated: March 2026