KitchenAid KSRS25IKBL01 side-by-side refrigerator Parts

Yes. KitchenAid makes 33-inch-wide refrigerators, but your KSRS25IKBL01 is a side-by-side model and not every KitchenAid refrigerator is 33 inches wide. For exact width and clearance requirements on your specific refrigerator, use the installation guide.

What “33-inch wide” means for fit

A “33-inch-wide” refrigerator is typically designed to fit a 33-inch cabinet opening, but you still need extra space for door swing, leveling, and airflow.

Common clearance items to plan for:

• Side clearance so doors open fully and bins slide out
• Top clearance for ventilation and easier installation
• Rear clearance for the water line and power cord
• Hinge-side clearance (often the tightest spot)

Quick size comparison (typical)

These are common width ranges by style; always confirm the exact spec for the model you are buying.

Refrigerator style	Typical width range	Notes
Bottom-freezer	29 to 33 in.	Many 33-in. options exist
Side-by-side	32 to 36 in.	Often wider than 33 in.
French door	33 to 36 in.	33-in. models are common

Why it matters

Width alone does not guarantee a good fit. Door swing and clearance can be the difference between a refrigerator that “fits” and one that is usable day to day, especially with a water dispenser line or tight walls.

If you are shopping or replacing

When comparing a new KitchenAid refrigerator to your KSRS25IKBL01, we recommend checking:

• Overall width (case width) and door-open width
• Depth with handles (full-depth vs counter-depth)
• Height with hinges
• Water hookup location and tubing routing

Last updated: February 2026

For KitchenAid KSRS25IKBL01 parts, we recommend using the model-specific parts list and diagrams to match the exact replacement part you need, then ordering through Sears PartsDirect. For model-specific installation and setup details that affect parts fit, use the installation guide.

Best way to get the right part for KSRS25IKBL01

We focus on helping you identify the correct part by symptom and location on the refrigerator.

• Find the symptom (no ice, no water, leaking, warm temps, door not closing)
• Match the part to the diagram location before ordering
• Compare your old part’s markings to the listing (when accessible)
• Replace common wear items first (filters, valves, door seal components)
• Follow shutoff and safety steps before servicing (power off, water off)

Common parts customers ask about

If you are contacting KitchenAid because you are unsure which part to buy, these are frequent replacements for this model:

Problem you see	Common part to check	Example part for this model
Water tastes/flows poorly	Water filter	Refrigerator water filter EDR5RXD1
Ice maker not filling	Water inlet valve	Refrigerator inlet valve W10408179
Ice maker not producing	Ice maker assembly	Refrigerator ice maker 2198597
Frost buildup, warm fridge	Defrost system	Refrigerator defrost bi-metal WPW10225581 and refrigerator heater WP2323198

Why it matters

KitchenAid side-by-side refrigerators often have multiple similar-looking parts across model families. Using the KSRS25IKBL01 parts list and the installation guide helps prevent ordering a part that does not fit or does not match your wiring, tubing, or mounting style.

Last updated: February 2026

The KitchenAid KSRS25IKBL01 is a full-size side-by-side refrigerator in the 25-cubic-foot class. For the exact total capacity (fresh food plus freezer), use the model’s specification section in the installation guide.

What capacity means on a side-by-side

Total cubic feet is the combined interior volume of both compartments; it is not the same as “usable” shelf space.

• Total capacity = refrigerator section + freezer section
• Usable space changes with shelf positions, door bins, and the ice system
• A full ice bin and ice maker assembly reduce available freezer storage
• A bulky filter housing or air channels can affect how you organize items

Typical capacity range for this model type

Most KitchenAid side-by-side refrigerators in this size class fall in a narrow range.

Item	What to expect
Total capacity class	About 25 cu. ft.
Where to confirm the exact number	Installation guide
What can make it feel smaller	Ice maker, ice bin, shelf and bin layout

Why it matters

Capacity helps you compare refrigerators and plan storage, but the exact spec is most useful when you are matching your current unit’s layout and features (like through-the-door ice and water).

Parts that can affect usable space

If you are troubleshooting ice or water issues that impact storage and organization, these model-compatible parts are common:

• Refrigerator ice maker 2198597
• Refrigerator water filter housing WP2186443

Last updated: February 2026

The most common issues we see on KitchenAid side-by-side refrigerators like model KSRS25IKBL01 are ice maker and water dispenser problems, followed closely by cooling complaints caused by airflow or defrost issues. These symptoms often trace back to water supply parts, fan airflow, or frost buildup.

Most common symptoms customers report

• Ice maker not making ice, slow ice production, or hollow cubes
• Water dispenser slow, sputtering, or not dispensing
• Refrigerator section warm while freezer seems closer to normal
• Frost buildup on the freezer back wall or vents
• Unusual noises (fan-related) or intermittent cooling

What usually causes those problems

Here are the most frequent root causes on side-by-side designs:

Problem area	What you notice	Common fix path
Water supply to ice and water	No ice, no water, small cubes	Replace filter, check inlet valve, purge air
Evaporator airflow	Warm fridge, uneven temps, noise	Inspect evaporator fan area, clear ice blockage
Defrost system	Frost blanket, weak airflow, warming	Check defrost heater and defrost bi-metal
Door sealing	Moisture, frost, temp swings	Inspect and correct door gasket sealing

Quick checks we recommend first (in order)

1. Confirm the freezer is cold enough: Most ice makers need the freezer near 0°F to cycle reliably.
2. Replace the water filter if it is overdue: A restricted filter can reduce water flow to both the dispenser and ice maker. For this model, use the refrigerator water filter EDR5RXD1.
3. Purge air from the water line after a filter change or water shutoff.
4. Listen for the evaporator fan (freezer compartment): if airflow is weak or noisy, cooling suffers.
5. Look for frost buildup on the freezer rear panel; heavy frost points to a defrost problem.

Parts that commonly solve ice and water complaints

If basic checks point to a failed component, these are common replacements for KSRS25IKBL01:

• Refrigerator inlet valve W10408179 (no/low water to dispenser or ice maker)
• Refrigerator ice maker 2198597 (ice maker not cycling or not producing)
• Refrigerator water filter housing WP2186443 (leaks or poor filter seating)

Why it matters

Ice maker, water, and cooling problems can overlap. For example, low water flow (filter or inlet valve) causes small cubes, while frost buildup (defrost heater or bi-metal) blocks airflow and makes the fresh food section warm. Fixing the correct root cause prevents repeat failures and food temperature swings.

For model-specific setup and water connection details, follow the installation guide.

Last updated: February 2026