Kenmore Elite 79571059012 refrigerator Parts

To level your Kenmore Elite 79571059012 refrigerator, we lift the front by turning the two front leveling legs. Turn a leveling leg clockwise to raise that side and counterclockwise to lower it; the adjustment screw does not come out, it only changes height.

Safe way to lift and level the front

• Keep the refrigerator plugged in only if the 79571059012 owner's manual procedure calls for it; otherwise unplug before moving the unit.
• Pull the refrigerator forward enough to access the base cover area.
• Open the freezer drawer and remove the base cover screws, then remove the base cover.
• Use an 18 mm (11/16-inch) wrench or a flat-blade screwdriver (depending on the leg style) to turn the leveling legs.
• Have a second person push backward against the top of the refrigerator to take weight off the legs; this makes turning easier.
• Reinstall the base cover when finished.

What “level” should look like

The goal is stability and easy door closing. For this model, the front should be slightly higher than the back.

What you notice	What to adjust	What to do
Refrigerator rocks or feels unsteady	Front leveling legs	Raise the low side (turn clockwise) until stable
Doors do not close easily	Both front leveling legs	Turn both legs clockwise the same amount to tilt slightly more to the rear
Doors look uneven at the top	Door alignment nut at hinge	Adjust hinge nut: counterclockwise raises, clockwise lowers

Why it matters

Proper leveling reduces door seal leaks, helps the fresh food doors close completely, and prevents vibration noise. It also helps the freezer drawer track smoothly.

Last updated: January 2026

Kenmore Elite appliances first launched in 1999. That date applies to the Kenmore Elite product line overall (not just refrigerators like model 79571059012); your refrigerator’s exact production year is best confirmed using the model’s documentation and serial tag details in the 79571059012 use & care guide.

What “came out” means for Kenmore Elite

Kenmore Elite is a premium line name that spans multiple appliance types. The launch year refers to the brand line introduction, while each refrigerator model (including 79571059012) has its own production run.

• Line launch: Kenmore Elite debuted in 1999.
• Model release: varies by model number and revision.
• Manufacture date: tied to the serial number on the rating label.
• Documentation date: the manual part number and version can help narrow the era.

How to identify the year your 79571059012 was made

Use the refrigerator’s rating label (typically inside the fresh food compartment on a side wall) and compare it with the identification guidance in the 79571059012 use & care guide.

• Locate the model and serial label inside the refrigerator section.
• Write down the full serial number exactly as shown.
• Check the manual’s model listing (it shows the 795.7105 series) to confirm you have the right documentation.
• If you are ordering parts, match by model number first, then confirm by serial when needed.

Quick reference: line launch vs. your refrigerator

Item	What it tells you	Example for this page
Kenmore Elite launch year	When the Elite line debuted	1999
Model number	Which design family you have	79571059012
Serial number	When your unit was built	Found on rating label

Why it matters

The correct year (and serial range) helps us match the right refrigerator parts, especially for items that change over time like the water filter, ice maker assembly, door switch, and control components.

Last updated: January 2026

A Kenmore Elite refrigerator like model 79571059012 typically lasts 12 to 15 years. Consistent cleaning, good airflow around the cabinet, and quick fixes for water leaks or cooling issues help you reach (and often exceed) that range.

What affects lifespan most

• Condenser coil cleanliness: Dust buildup makes the compressor run longer and hotter.
• Door gasket seal: Leaks force longer run times and can cause frost and temperature swings.
• Ventilation and leveling: Poor airflow or an unlevel cabinet increases vibration and wear.
• Water system upkeep: Timely filter changes reduce strain on the dispenser and ice maker.
• Usage patterns: Frequent door openings and warm room temps increase run time (normal, but adds wear over years).

Maintenance checklist we recommend

Use the schedule below as a practical baseline; follow the exact procedures in the 79571059012 use and care guide.

Task	Typical frequency	Why it helps
Clean condenser coils	Every 6 to 12 months	Reduces compressor run time and heat load
Inspect and clean door gaskets	Every 3 to 6 months	Prevents air leaks and frost buildup
Replace water filter	About every 6 months	Maintains flow and water quality
Verify doors close fully and unit is level	Every 6 months	Prevents vibration, warm spots, and icing

When replacement is more likely than repair

These symptoms often show up late in a refrigerator’s life and can signal major sealed-system or cooling wear:

• Refrigerator and freezer temperatures drift even after cleaning coils
• Compressor runs almost constantly and cooling still struggles
• Repeated ice maker or water dispenser issues tied to low flow or freezing lines
• Excessive vibration or rattling that leveling does not correct

Why it matters

A refrigerator that runs longer than normal uses more energy and puts extra stress on key components like the compressor, fans, and temperature sensors. Preventive care keeps temperatures stable and reduces long-term wear.

Last updated: January 2026

Common problems we see with the Kenmore Elite 79571059012 bottom-mount refrigerator include cooling issues (compressor or airflow related), ice maker and dispenser troubles, and control or sensor problems that cause temperature swings or nonstop running. Use the troubleshooting section in the 79571059012 use & care guide to match symptoms to checks.

Most common symptoms and what they usually point to

• Not cooling or weak cooling: dirty condenser coils, failed condenser fan, evaporator fan issue, or compressor/start device problem
• Compressor runs a lot: frequent door openings, warm room conditions, dirty coils, or temperature control issues (some run time is normal)
• No ice or slow ice: ice bin not level or overfilled, ice compartment door not sealing, water supply restriction, ice maker failure
• Water dispenser weak or no water: clogged filter, kinked tubing, or inlet valve problem
• Rattling/vibration: unit not level or floor uneven (leveling legs need adjustment)

Quick checks we recommend first (safe, high-impact)

1. Confirm doors seal and close fully; warm air leaks cause long run times and icing.
2. Clean condenser coils (a common cause of poor cooling and long compressor run time).
3. Check the ice bin and ice compartment door; uneven ice can make the ice maker stop early, and a door left ajar can freeze items in the fresh-food section.
4. Replace the water filter on schedule; a restricted filter can reduce water flow to the dispenser and ice maker.
5. Verify temperature settings and allow 24 hours after changes for stabilization.

Parts that commonly solve these problems on model 79571059012

Symptom	Common part to inspect/replace	Example part for this model
Bad taste/low water flow	Water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
No ice, intermittent ice	Ice maker assembly	Refrigerator ice maker assembly AEQ73110205
No water to dispenser/ice maker	Water inlet valve	Lg refrigerator water inlet valve AJU72992601
Lights or dispenser behavior odd when door moves	Door switch	Refrigerator door switch 6600JB1010A

Why it matters

Many “not cooling” and “no ice” complaints come from airflow restrictions, dirty coils, or a small sealing issue. Fixing those early reduces compressor run time, helps temperatures recover faster, and can prevent repeat ice maker problems.

Last updated: January 2026