KitchenAid KSRX25FTSS00 side-by-side refrigerator Parts

The KitchenAid KSRX25FTSS00 is a full-size side-by-side refrigerator in the 25 cu. ft. class. For exact “how big” measurements, our KSRX25FTSS00 owner's manual includes dimensioned diagrams for 25 cu. ft. door panel sizing, which is the most reliable way to confirm fit for cabinetry and custom panels.

What “how big” usually means (and what we can confirm)

Most customers mean one of these:

• Overall exterior size (width, height, depth)
• Capacity (cubic feet)
• Door and panel dimensions (for custom wood panels)
• Clearance needs (door swing, airflow space)

From the documentation we have for this model family, we can directly confirm 25 cu. ft. door panel dimensions (used when adding custom panels).

Model-specific dimensions we can pull from the manual (custom door panels)

If you are matching or replacing custom wood panels, the manual shows these 25 cu. ft. freezer and refrigerator door panel dimensions:

Item (25 cu. ft. panels)	Dimension shown	Metric equivalent (approx.)
Panel height	63 11/16 in	161.8 cm
Panel width	28 5/64 in	71.3 cm
Handle-side routing depth/area	3 1/4 in	8.25 cm

The manual also notes common panel construction guidance (for example, flat panels up to 1/4 in thick, and raised panel weight limits).

Quick fit-check steps before you measure the space

• Measure the opening width at top, middle, and bottom.
• Measure height to the lowest cabinet or soffit.
• Measure depth to the front edge of counters, then plan for door and handle projection.
• Confirm you have room to pull the unit out for service (water line, inlet valve, condenser cleaning).
• If you have a water dispenser or ice maker, confirm a nearby water supply and shutoff.

Why it matters

“Big” affects more than whether the refrigerator slides into the opening. It also impacts door swing clearance, airflow around the cabinet, and whether accessories like custom panels fit correctly without rubbing or overloading hinges.

If you are shopping for maintenance parts while you measure, we stock common items for this model like the refrigerator water filter EDR3RXD1 and you can search by model on Sears PartsDirect.

Last updated: February 2026

A KitchenAid side-by-side refrigerator like model KSRX25FTSS00 typically lasts 14 to 17 years. With steady maintenance (clean condenser coils, good door seals, and correct temperatures), many units reach the upper end of that range.

Typical lifespan and what affects it

Most refrigerator life comes down to how hard the sealed system and airflow components have to work.

• Maintenance: dirty condenser coils shorten compressor life
• Door seal condition: air leaks cause longer run times and frost issues
• Temperature settings: keep fresh food near 37°F and freezer near 0°F
• Water quality (if you use the dispenser/ice maker): reduces valve and ice maker problems
• Ventilation and loading: blocked vents and overpacking reduce cooling efficiency

What “lifespan” means vs. what’s covered

Your refrigerator can run well beyond the basic warranty period; warranty coverage is not the same as expected service life. The KSRX25FTSS00 documentation also describes longer limited coverage on sealed refrigeration system parts (such as the compressor, evaporator, and condenser). For the exact terms and timeframes, use the KSRX25FTSS00 owner's manual.

Item	Typical expectation	What to do to help it last
Overall refrigerator lifespan	14 to 17 years	Clean coils, keep seals tight, set correct temps
Sealed system (compressor/evaporator/condenser)	Often longest-lasting components	Keep coils clean, ensure good airflow
Water and ice system	More maintenance-sensitive	Replace filter on schedule, purge air after changes

Maintenance that most improves longevity

These steps prevent the most common “wear-out” failures.

• Vacuum/brush condenser coils every 6 to 12 months
• Keep door gaskets clean and sealing flat
• Replace the water filter regularly (this model uses refrigerator water filter EDR3RXD1)
• If ice production slows, check for restricted water flow and consider diagnosing the refrigerator inlet valve W10408179
• Keep freezer vents clear so the evaporator fan can move air

Why it matters

A refrigerator that runs longer and cycles normally uses less energy, holds safer food temperatures, and puts less strain on expensive parts like the compressor and electronic controls.

If you need parts for KSRX25FTSS00, order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

The most common problems we see on a KitchenAid side-by-side refrigerator like model KSRX25FTSS00 are ice maker and water dispenser issues, warm temperatures from poor airflow, and water leaks. These symptoms often trace back to the water filter, inlet valve, evaporator fan motor, or defrost system; use the owner's manual for model-specific checks and settings.

Most common symptoms and what usually causes them

• Ice maker not making ice: restricted water supply, clogged filter, or a failing ice maker
• Water dispenser slow or not dispensing: clogged filter, air in the line, or inlet valve problem
• Refrigerator warm but freezer cold: evaporator fan or damper airflow issue
• Water leaking inside or under the unit: defrost drain issue or water line/valve seepage
• Unusual noises: evaporator fan blade rubbing ice, or a failing fan motor

Quick checks we recommend first (before replacing parts)

• Confirm the temperature controls are set correctly and vents are not blocked by food packages.
• If water flow is weak, replace the filter and then dispense water for several minutes to clear air.
• Inspect the freezer back panel for heavy frost; that points to a defrost problem.
• Listen for the evaporator fan in the freezer; it should run when the compressor is running.
• Check for a kinked water line behind the refrigerator and verify the shutoff valve is fully open.

Common parts that fix these problems on KSRX25FTSS00

Symptom	Likely part to check	Example part on this model page
Slow water, bad taste/odor, dispenser issues	Water filter	Refrigerator water filter EDR3RXD1
No ice or small cubes	Ice maker assembly	Refrigerator ice maker 2198597
No water to ice maker/dispenser	Water inlet valve	Refrigerator inlet valve W10408179
Frost buildup, warming temps	Defrost heater or thermostat	Refrigerator heater WP2323198, refrigerator defrost bi-metal thermostat WPW10225581
Warm fridge section, noise in freezer	Evaporator fan motor/blade	Refrigerator evaporator fan motor WP2315549, refrigerator evaporator fan blade WP2169142

Why it matters

On a side-by-side refrigerator, airflow and water supply problems can look like “cooling failure” even when the sealed system is fine. Catching a clogged filter, weak inlet valve, or failing evaporator fan early helps prevent temperature swings, ice buildup, and food spoilage.

Helpful DIY guidance

For a model-matched walkthrough, we recommend how to replace the water filter in a KitchenAid refrigerator. For broader parts shopping by model number, use the parts list for KSRX25FTSS00 or search on Sears PartsDirect.

Last updated: February 2026