Owner’s manual
View engine
How much oil is in a Craftsman 917258553?
The Craftsman 917258553 tractor’s crankcase oil capacity is 4.0 pints with an oil filter and 3.5 pints without an oil filter. Use those amounts as a fill target, then confirm the final level on the dipstick using the procedure in the 917258553 owner’s manual.
Use the correct capacity based on whether you replace the oil filter:
- Change oil and filter: 4.0 pints (2.0 quarts)
- Change oil only: 3.5 pints (1.75 quarts)
- Park on level ground and set the parking brake before checking oil
- Add oil slowly near the end; recheck the dipstick after each small addition
| Service you perform | Capacity (pints) | Capacity (quarts) |
|---|---|---|
| Oil and filter change | 4.0 | 2.0 |
| Oil change only | 3.5 | 1.75 |
For this Craftsman tractor, the manual lists these common choices:
- SAE 10W-30 for temperatures above 32°F
- SAE 5W-30 for temperatures below 32°F
- Use an API service rating listed in the manual (API-SF/SG/SH)
Correct oil level protects the Kohler engine from accelerated wear. Overfilling can cause smoking and plug fouling; underfilling can lead to overheating and internal damage.
If you are doing seasonal maintenance along with an oil change, these model-matched deck and drive items are commonly replaced:
- Lawn tractor ground drive belt, 1/2 x 82-in 532140294
- Lawn tractor drive belt 532144200
- Husqvarna lawn tractor mulching blade, 21-in 532134149
You can order replacement parts from the parts list for model 917258553, or search by model number on Sears PartsDirect.
Last updated: February 2026
How to look up Craftsman model number?
For Craftsman lawn tractor model 917258553, we look up the model number on the tractor’s model plate under the seat; the engine has a separate model number on the engine blower housing. Use the tractor model number when finding the correct parts list and diagrams in the 917258553 owner's manual.
On most Craftsman front-engine riding mowers and tractors, the identification plate is easy to miss because it’s placed where it stays protected from debris.
- Tractor model plate: on the frame under the seat (lift or tilt the seat to view it)
- Engine model number: on the blower housing of the engine
- Write it down exactly: include all digits and punctuation
- Use the tractor model for parts: the tractor model drives the correct chassis and deck parts lookup
- Use the engine model for engine parts: filters, ignition, carburetion, and some engine-specific hardware
Use this quick guide so you search the right number the first time.
| What you are doing | Use this number | Where it’s found |
|---|---|---|
| Ordering mower deck, belts, steering, wheels, or body parts | Tractor model number (example: 917258553) | Under the seat |
| Looking up engine-specific parts | Engine model number | On the engine blower housing |
| Confirming the tractor configuration in the manual | Tractor model number | Under the seat |
Craftsman tractors and their engines are often built as a matched set; the tractor and engine each have their own model number. Using the wrong one can pull up the wrong drive belt length, deck configuration, or steering parts.
When you’re ready to buy, match the part description to your tractor’s diagrams, then order by the listed part number. Common wear items for this model’s 42-inch deck and drive system include the lawn tractor ground drive belt 532140294 and the lawn tractor drive belt 532144200. You can also search by model number on Sears PartsDirect.
Last updated: February 2026
What model number is the Craftsman 42 riding mower?
For the Craftsman front-engine lawn tractor on this page, the model number is 917258553. You can also confirm it on the tractor’s model plate under the seat; our owner's manual shows this model as a 42-inch mower deck tractor.
We use the tractor model number (not the engine model number) to match the correct Craftsman parts list, diagrams, and repair parts.
- Look under the seat for the model plate (tractor model number).
- Check the engine blower housing for the engine model number (different from the tractor model).
- Write down the full model number exactly as shown (numbers and punctuation).
- Use the model number when ordering belts, blades, deck parts, wheels, and steering parts.
A “42” description usually refers to the mower deck cutting width, not the model number.
| Item | What it tells you | Where to look |
|---|---|---|
| Tractor model number | Exact parts fit for the whole tractor | Model plate under the seat |
| Engine model number | Engine-specific parts (tune-up items, some engine hardware) | Blower housing |
| Deck size (42-inch) | Cutting width and deck-related parts | Decals and deck documentation |
Using the correct model number prevents ordering the wrong drive belt, blade drive belt, mandrel parts, or deck components. For example, this model’s 42-inch deck parts list includes items like the husqvarna lawn tractor mulching blade, 21-in 532134149 and the lawn tractor ground drive belt, 1/2 x 82-in 532140294.
We recommend ordering replacement parts directly from the parts list for model 917258553 on this page; you can also search by model number on Sears PartsDirect if you are working on another Craftsman tractor.
Last updated: February 2026
