Kenmore 11026732503 washer Parts

To hard reset your Kenmore washer model 11026732503, unplug it for about 1 minute, then plug it back in and start a new cycle. This clears many temporary control glitches and is the safest reset method for a mechanical-timer style washer.

• Push in the cycle control knob to stop the washer.
• Unplug the washer from the wall outlet.
• Wait 1 full minute.
• Plug the washer back in.
• Select a new cycle and pull the knob out to start.
• If the lid was open, close it fully before restarting.

A “reset” will not fix a failed safety switch, drain problem, or out-of-balance condition. Use these quick checks first:

• Confirm the outlet has power (try a lamp or small appliance).
• Make sure the lid closes firmly; a bad lid switch can prevent agitation and spin.
• If the tub is full of water, check for a drain restriction or a pump issue.
• Redistribute the load if the basket is off-center or banging.
• Verify the washer is level; loose leveling feet can cause vibration and shutdowns.

Resetting restores normal operation after a power interruption or a stuck timer contact, but repeated “needs a reset” behavior usually points to a real issue (lid switch, drain pump, motor coupling, or leveling). Following the correct stop and restart steps in the owner's manual helps prevent repeat problems.

If you need parts for model 11026732503, order from the parts list for this washer or search by model on Sears PartsDirect.

Last updated: February 2026

Yes; for a Kenmore washer like model 11026732503, repairing is worth it when the fix restores reliable wash and spin performance for less than replacing the machine, especially for common wear items such as the lid switch, drain pump, or motor coupling. Use the owner's manual to match symptoms to troubleshooting steps before buying parts.

We use three checks that work well for most top-load Kenmore washers:

• Is the problem isolated? One failed part (no drain, no spin, no agitate) is usually a good repair.
• Is the tub and cabinet solid? If the basket, tub, and frame are stable and not severely rusted, repairs tend to last.
• Is the repair straightforward? Many common fixes are accessible with basic tools and the right safety steps.

These are frequent causes of “won’t spin/drain/agitate” and are typically worth fixing:

• Washer lid switch assembly WP8318084 (won’t spin or drain with lid open signal)
• Washer drain pump WP3363394 (won’t drain, humming, slow drain)
• Washer motor coupling 285753A (won’t agitate or spin, motor runs but basket does not)
• Agitator dog 80040 (agitator slips or only moves one direction)

A targeted repair keeps a proven Kenmore platform running, avoids the learning curve of a new washer, and often restores performance quickly. The manual also emphasizes safe servicing practices, including not attempting repairs unless the instructions are understood and followed. Review the installation guide if you suspect setup issues (leveling, drain hose routing) are contributing to vibration or draining problems.

We recommend ordering replacement parts for Kenmore 11026732503 directly from the parts list for this model, or searching by model number on Sears PartsDirect if you are comparing options.

Last updated: February 2026

Yes. Kenmore Elite is positioned as Kenmore’s higher-end line; it typically adds upgraded performance, more cycle and option choices, and a more premium look and feel than standard Kenmore models. For your Kenmore washer model 11026732503, the exact feature set depends on the specific series and trim shown in the 11026732503 owner's manual.

Kenmore Elite models are designed to deliver stronger cleaning results and more convenience features than entry-level washers.

Common Elite upgrades include:

• More wash cycles and fabric-specific options
• Higher spin speeds (better water extraction, shorter dry times)
• Better vibration control and smoother operation
• Larger capacity designs (varies by model)
• More durable drive and suspension components

We recommend confirming using the model and labeling on the machine, then matching it to the documentation.

Check these spots:

• The model tag under the lid or along the lid opening
• The console branding (it may say “Elite”)
• The feature list and cycle chart in the 11026732503 owner's manual

Knowing whether your washer is Kenmore Elite helps you set the right expectations for cycle behavior, noise and vibration, and repair approach. It also helps you choose the correct replacement parts when troubleshooting issues like no-drain, no-spin, or agitation problems.

If your washer is not cleaning well, not spinning out water, or making noise, these model-matched parts are common suspects:

• Washer motor coupling 285753A (drive connection issues)
• Clutch 285785 (spin performance issues)
• Washer lid switch assembly WP8318084 (won’t spin or drain if the lid switch fails)
• Washer drain pump WP3363394 (drain problems)

You can order replacement parts for Kenmore 11026732503 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes, Kenmore washers can have a filter or screen, but it depends on the design. On Kenmore model 11026732503, the most common “filter” maintenance is cleaning the water inlet valve screens in the fill hoses and keeping the drain path clear; the steps and locations are outlined in the owner's manual.

Most owners are looking for one of these:

• Inlet valve screens: small mesh screens where the hot and cold hoses connect to the washer
• Drain pump path: coins, lint, and small items can restrict draining even without a removable lint filter
• Tub and basket area: residue can build up if loads are overloaded or detergent is overused

Use this when fill is slow, water flow is weak, or the washer seems to not fill normally.

1. Turn off both water faucets.
2. Remove the hot and cold inlet hoses from the washer.
3. Remove any film or particles from the inlet valve screens.
4. Reinstall hoses, turn water back on, and check for leaks.

If cleaning screens does not fix filling or draining issues, these parts are commonly checked or replaced:

A clogged inlet screen can make cycles run longer, reduce cleaning performance, and cause the washer to appear like it is not filling correctly. Keeping water flow and draining normal also helps prevent unbalanced loads and poor spin-out.

We list model-matched replacement parts for Kenmore 11026732503 on this page. For additional model lookups and ordering options, use Sears PartsDirect.

Last updated: February 2026

The Kenmore washer model 11026732503 uses a standard top-load, agitator-style basket; capacity is best confirmed in the model’s specifications section of the 11026732503 owner's manual. For everyday use, load by basket fill level (not by cubic feet) to prevent poor cleaning and out-of-balance spinning.

Use these practical targets for this Kenmore top-load washer:

• Load items loosely; do not pack or compress laundry
• Keep the load at or below about 3/4 of the basket height for best agitation
• Mix large and small items to help balance the spin
• For bulky items (blankets, comforters), add a few towels to stabilize the load
• Choose the water level that matches the load size (small, medium, large)

The cubic-foot number is a tub-volume spec; load size is what protects performance.

Overloading an agitator washer reduces rollover, leaves soil behind, and increases strain on the drive system. Keeping loads to a realistic fill level helps the washer spin smoothly and protects parts that control agitation and spin.

If the washer struggles to agitate or spin when loaded correctly, these model-matched parts are often involved:

• Agitator dog 80040 (helps the agitator “grab” and move clothes)
• Washer motor coupling 285753A (transfers motor power into the drive system)
• Clutch 285785 (helps the basket reach and maintain spin speed)

To order replacement parts for Kenmore 11026732503, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026