Kenmore 66517849400 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66517849400. The key is matching parts to your exact model number so the fit and connections are correct, especially for common repairs like door leaks, rack issues, and wash system problems.

How to find the right part for Kenmore 66517849400

Start with the model number on the dishwasher’s rating label, then confirm the part by name and ID. Your 66517849400 owner's manual helps you identify features and maintenance items that often point to the right repair.

Common parts customers replace on this model include:

• Door sealing parts such as the dishwasher door seal WPW10509257
• Wash and spray hardware such as the dishwasher spray arm WP8268874
• Rack and roller parts (upper and lower rack wear items)
• Water fill components (valves, hoses, clamps)
• Heating and drying components (heater and seals)

Quick part examples (what they fix)

Symptom	Likely area	Example part for this model
Water leaking at the door	Door gasket, latch alignment	Dishwasher door seal (WPW10509257)
Poor cleaning or no spray	Spray arm, pump, clogs	Dishwasher spray arm (WP8268874)
Rack won’t roll smoothly	Rollers, slide rails	Dishwasher dishrack roller assembly, lower (WP8268645)
Not filling or fills slowly	Water inlet, supply issues	Dishwasher water inlet valve (WP8274220)

Before you buy: 5 checks that prevent wrong-part returns

• Confirm the full model number is 66517849400 (all digits matter).
• Match the part ID (for example, WPW10509257), not just the description.
• Compare your old part’s mounting points, ports, and electrical terminals.
• If you’re fixing a leak, inspect for cracks, warping, and debris on sealing surfaces.
• Use the installation guide for safe shutoff steps (power and water) before servicing.

Why it matters

Kenmore dishwashers are often built by major manufacturers, so parts can cross-reference, but the safest way to get the correct OEM-style replacement is still to shop by the exact model number and verify the part ID. That avoids fit issues that can cause leaks, poor wash performance, or repeat failures.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label. On Kenmore model 66517849400, that label is typically located inside the door area (the manual identifies it as the “model and serial number label”), and you’ll use that number to match the correct parts, installation details, and troubleshooting steps in the 66517849400 owner’s manual.

Where to look for the model number label

Check these common spots first (in order):

• Inside the door opening on the inner door frame
• Along the top edge of the door (visible when the door is open)
• On the tub wall near the door opening
• Near the control panel area when the door is open
• If it’s a portable unit, around the cabinet frame near the door opening

What the model number looks like (Kenmore 665 series)

Kenmore dishwashers often use a 665 prefix. For this dishwasher family, the manual shows the format 665.1784 followed by a color number.

What you see on the label	What it means	Example
665.1784xx	Model family + color digits	665.17849400
Serial number	Production identifier	(varies)

Why the model number matters

Using the exact model number helps us ensure parts and procedures match your dishwasher’s configuration. It is especially important when you are ordering fit-critical items such as a door seal, latch, or dishrack components.

Here are examples of model-matched parts you might need:

• Dishwasher door seal WPW10509257 for leaks around the door
• Dishwasher door latch WP3380854 if the door will not latch or start
• Dishrack W11169039 if the upper rack is damaged or rusted

Quick tips when the label is hard to read

• Wipe the label gently with a damp cloth and mild soap; avoid abrasives
• Use your phone camera and zoom in for clearer characters
• Write down both the model and serial number before calling for service (the installation instructions note you will need both)

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517849400 is usually worth it when the problem is a wear item (seal, latch, rack rollers) or a straightforward leak. If the repair involves major electrical or motor components and the unit is older, replacement can make more sense.

Quick way we decide: cost, age, and what failed

• Under ~8 to 10 years old: repairs are typically cost-effective.
• Over ~10 years old: repair is still reasonable for small fixes, but big-ticket parts can push you toward replacement.
• Leak at the door: often a seal or latch issue, usually worth fixing.
• Poor cleaning: commonly spray arm or seal issues, usually worth fixing.
• No wash action or loud motor noise: can point to a pump/motor problem, which is a higher-cost repair.

Use the troubleshooting and maintenance guidance in the 66517849400 owner's manual to narrow the failure before buying parts.

Common repairs that are usually “worth it”

Symptom	Likely area	Typical difficulty	Parts that often solve it
Water leaking at the door	Door sealing/latch	Easy to moderate	Dishwasher door seal WPW10509257, dishwasher door latch WP3380854
Dishes not getting clean	Spray system	Easy to moderate	Dishwasher spray arm WP8268874, dishwasher lower spray arm seal WP3376846
Rack won’t roll smoothly	Rack hardware	Easy	Dishwasher dishrack roller assembly, lower WP8268645, wheel WPW10204131

When replacement is the better value

We typically recommend considering replacement when:

• The dishwasher needs a major drive component (for example, a pump motor) and the estimate is high.
• You have multiple failures close together (leaks plus electrical issues plus poor washing).
• The tub or inner door panel is damaged; warranty coverage can apply depending on the specific tub design and failure type (details are outlined in the 66517849400 owner's manual).

Why it matters

A targeted repair restores cleaning performance and prevents water damage for far less than the cost and hassle of a full replacement. The key is diagnosing the failure correctly so you replace the right part the first time.

Last updated: February 2026