Kenmore 58714659200A dishwasher Parts

Your Kenmore dishwasher’s model number is usually printed on a rating label inside the door opening. Open the door and look around the inner door frame and tub lip; for this parts page, the model number you are matching is 58714659200A.

Where to find the model number label

Check these common spots in this order:

• Along the left or right inner door frame (most common)
• On the top edge of the door (visible when the door is open)
• On the tub wall just inside the door opening
• On the side of the door itself (near the hinge area)
• Behind the toe plate area (lower front), if the label is missing inside

For diagrams and model-specific identification notes, use the 58714659200A manual.

What the model number looks like (and what to write down)

Record the full model number exactly as shown, including any letters at the end.

What to capture	Example for this page	Why it matters
Model number	58714659200A	Ensures parts fit your exact dishwasher
Serial number	(varies)	Helps with production details and service history
Prefix/suffix letters	“A” at the end	Can change the correct latch, gasket, or control parts

Why it matters for parts and troubleshooting

Kenmore dishwashers can look similar across multiple series, but internal components can differ. Using the exact model number helps us match the correct door parts, fill parts, and drain parts.

If you are diagnosing a symptom (not just identifying the label), our Kenmore he dishwasher error codes guide can help you narrow down what to check next.

Quick tip if the label is worn or missing

• Take a clear photo with the door open and a flashlight angled across the label
• Wipe the area with a damp cloth; avoid abrasive cleaners on the label
• If only part of the number is readable, match the remaining characters carefully before ordering parts

Last updated: February 2026

Yes. We still carry replacement parts for Kenmore dishwashers, including model 58714659200A. The key is matching the exact model number to the correct OEM-style parts, then choosing the part that fits your symptom (won’t start, won’t drain, leaks, or won’t fill). See the 58714659200A manual for model-specific diagrams and part identification.

How to find the right part for your Kenmore dishwasher

Use your model number (58714659200A) and then narrow by the problem you’re seeing.

• Confirm the full model number from the rating label (usually on the tub frame near the door).
• Match the symptom to a system: fill, wash, drain, heat, or door/controls.
• Compare the part name and ID, not just a photo.
• Replace worn seals and latches early to prevent leaks and no-start issues.
• If multiple parts could cause the same symptom, start with the easiest inspection first.

Common parts customers replace on model 58714659200A

Here are examples of parts available for this model that cover frequent repairs:

Symptom	Likely part to check	Example part for this model
Door won’t latch or unit won’t start	Door latch	Dishwasher door latch 5304535183
Dishwasher won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve 5304482406
Dishwasher won’t drain	Drain pump	Dishwasher drain pump 5304483444
Leaks around the door	Door gasket	Gasket 5304512895

Why it matters

Kenmore dishwashers are often built by major manufacturers, so parts support stays strong for common repairs. Using the exact model number (like 58714659200A) prevents ordering a look-alike part that mounts differently, uses a different connector, or won’t seal correctly.

Last updated: February 2026

Water standing in the bottom of your Kenmore dishwasher model 58714659200A almost always means the unit is not draining completely. In most cases, clearing a clogged filter, drain path, or air gap fixes it; if not, the drain pump or drain hose routing is the next place to focus.

Quick checks that fix most standing-water problems

• Cancel the cycle and run a drain (or cancel-drain) to see if water evacuates.
• Remove the lower rack and clean the sump area and filter screen (food, labels, glass).
• Check the sink drain/garbage disposal inlet where the dishwasher drain connects; clear buildup.
• If you have an air gap, remove the cap and clean it out.
• Inspect the drain hose for kinks, crushing, or a low loop that lets water flow back.

Parts to suspect when it still will not drain

If the drain path is clear but water remains, these parts are common causes:

• Dishwasher drain pump 5304483444 (jammed impeller, failed motor, or debris in the pump)
• Drain hose (blockage or improper high-loop routing)
• Check valve (if equipped in your drain path; can stick and allow backflow)

Symptom-to-cause guide

What you notice	Most likely cause	What we do next
Humming but no drain	Pump jam or failed pump	Check for debris; replace pump if seized
Drains slowly	Partial clog in hose/air gap/disposal	Clear restriction; verify strong sink drain
Drains, then water returns	Backflow from sink plumbing or no high loop	Correct hose routing; clean air gap
Standing water with dirty dishes	Filter/sump blockage	Clean filter and sump thoroughly

Why it matters

Standing water can cause odors, redeposit soil on dishes, and strain the drain pump. Fixing the drain path early helps prevent repeat clogs and reduces the chance of a pump failure.

Helpful reference

Use the 58714659200A manual to confirm the correct cancel-drain steps, filter access, and the recommended drain hose routing for your installation.

Last updated: February 2026

Kenmore model 58714659200A is made for Kenmore by Frigidaire (Electrolux). Kenmore is a brand name, so the actual manufacturer is identified by the model number prefix; 587 is the prefix used for Frigidaire-built dishwashers.

How to tell who built a Kenmore dishwasher

We use the model number prefix (the first three digits) to identify the original manufacturer.

• 587 = Frigidaire (Electrolux)
• 665 = Whirlpool (common on many Kenmore dishwashers)
• The prefix is the most reliable identifier when the badge says only “Kenmore”
• The full model number matters; always match all digits and letters

Where to find the model number on 58714659200A

Check these common locations on Kenmore dishwashers:

• On a label along the inside edge of the door
• On the tub frame near the door opening
• Sometimes on the side of the door itself

For label location and model identification details specific to this unit, use the 58714659200A manual.

Why it matters

Knowing the true manufacturer helps you match the right parts and troubleshooting steps for your dishwasher’s design (controls, wash system, and wiring can differ by builder even when the brand is Kenmore).

What you have	What it tells us	Why you care
Kenmore badge	Brand only	Doesn’t identify the builder
Model prefix 587	Frigidaire-built	Guides correct parts and repair info
Full model 58714659200A	Exact configuration	Ensures correct fit and compatibility

Last updated: February 2026

Common problems we see with the Kenmore 58714659200A dishwasher include not starting, not draining, leaking, poor cleaning, and water not filling. These issues usually trace back to the door latch, drain system, water inlet valve, or a control/input problem; use the 58714659200A owner's manual to match symptoms to your model’s checks.

Most common symptoms and likely causes

• Won’t start: door not fully latched, failed door latch, keypad/membrane issue, control board issue
• Won’t drain: clogged filter/sump area, blocked drain hose/air gap, failed drain pump
• Not filling or fills slowly: closed water supply valve, clogged inlet screen, failed inlet valve
• Leaking: worn door gasket, misloaded racks causing spray deflection, loose hose connections
• Poor cleaning: blocked spray arms, low water temperature, overloading, detergent dispenser not opening

Quick checks we recommend first (fast, no parts)

1. Confirm the door closes firmly and the latch “clicks” (a weak latch can prevent the cycle from starting).
2. Cancel/drain the cycle and listen for the drain pump; check for standing water afterward.
3. Verify the sink hot water is hot at the tap before starting (dishwashers clean best with hot incoming water).
4. Inspect the bottom area for debris around the sump and filters.
5. Check the water supply valve under the sink is fully open.

Parts that commonly fix these problems on this model

Symptom	Part to suspect	What it affects
Won’t start	Dishwasher door latch 5304535183	Confirms the door is closed so the control will run
Won’t drain	Dishwasher drain pump 5304483444	Pumps water out to the drain hose
Not filling	Dishwasher water inlet valve 5304482406	Lets water enter the tub during fill
Leaking at door	Gasket 5304512895	Seals the door to prevent drips
Detergent door won’t open	Dishwasher detergent dispenser assembly 5304509278	Releases detergent/rinse aid at the right time

Error codes can speed up diagnosis

If your dishwasher shows a code or blinking pattern, use our Kenmore he dishwasher error codes guide to narrow the problem to a specific circuit (fill, drain, heating, or control).

Why it matters

Dishwasher problems often look the same from the outside, but the fix is different: a “won’t start” complaint can be as simple as a latch issue, while a “won’t drain” symptom can point straight to the drain pump or a blockage. Targeting the right system saves time and avoids unnecessary parts.

Last updated: February 2026