Kenmore Elite 10657705701 side-by-side refrigerator Parts

A Kenmore Elite refrigerator like model 10657705701 typically lasts 12 to 15 years with normal household use. Consistent cleaning, good airflow around the cabinet, and staying on top of water and ice system maintenance help you reach (and often exceed) that range; see the 10657705701 owner's manual.

• Condenser cleanliness: Dust buildup makes the sealed system work harder.
• Air circulation: Blocked vents or tight clearances can raise operating temperatures.
• Door seal condition: Worn gaskets cause longer run times and moisture issues.
• Water filter and dispenser use: Clogs and low flow can strain valves and the ice maker.
• Temperature settings and loading: Overstuffing reduces airflow and cooling efficiency.

• Vacuum the condenser area and grille regularly (more often with pets).
• Keep interior air vents clear in both the fresh food and freezer sections.
• Confirm doors close and seal fully; clean gasket surfaces with mild soap and water.
• Replace the water filter on schedule; for this model, a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.
• After changing the filter, flush the water system so taste, odor, and flow stabilize.

A refrigerator that runs longer to hold temperature uses more energy and puts extra wear on key components (fans, defrost parts, and the sealed refrigeration system). Simple airflow and cleaning habits are the easiest way to protect long-term reliability.

Last updated: January 2026

For Kenmore Elite model 10657705701, the exact cubic-foot capacity is listed in the product specifications section of the 10657705701 owner's manual. If you are trying to match shelves, bins, or a water filter, the model number is the most reliable way to get the right fit.

We recommend checking the “Product data sheet” or specifications pages in the manual.

• Look for headings such as Product data sheet, Specifications, or Capacity
• Use the table of contents to jump to the specs section quickly
• If your manual is a PDF, use search for “cu. ft.” or “capacity”
• Confirm you are reading the manual for 10657705701 (not a similar 106-series model)

Capacity is used to group refrigerators into size classes, but it does not guarantee that parts interchange. For example, door bins, ice maker components, and water filter housings can vary between similar-looking models.

• Refrigerator water filter style and cap design
• Ice maker mounting and wiring connector style
• Door bin and shelf rail dimensions
• Airflow parts such as the damper and evaporator fan

If you are asking because you need a replacement filter, use the model-based match instead of cubic feet. This model uses a cartridge-style filter such as the genuine Kenmore refrigerator water filter EDR3RXD1 when equipped with the internal filter housing.

Using the correct capacity helps with planning and comparisons, but using the correct model number (10657705701) is what prevents ordering the wrong refrigerator parts.

Last updated: January 2026

Common problems we see with the Kenmore Elite 10657705701 side-by-side refrigerator include weak or no ice production, water dispenser issues, warm temperatures from poor airflow, and frost buildup from defrost failures. Many of these symptoms trace back to the ice maker, water filter and supply, or the defrost system described in the 10657705701 owner's manual.

• Not cooling or uneven temperatures: blocked vents, dirty condenser area, evaporator fan issues, or a control problem
• Frost buildup on the back freezer panel: defrost heater, defrost thermostat, or airflow restriction
• Ice maker not making ice: ice maker assembly problem, water supply issue, or frozen fill path
• Slow water flow at dispenser: clogged filter, kinked water line, or inlet valve restriction
• Water tastes off or filter light is on: filter needs replacement and the system needs flushing

1. Confirm controls are set correctly and allow 24 hours for temperatures to stabilize after changes.
2. Make sure air vents are not blocked by food packages (proper air circulation is critical).
3. If you recently replaced the filter, flush the water system to clear air and carbon fines.
4. If dispenser water is not cold enough, remember it is typically chilled only to about 50°F (10°C).
5. Verify the refrigerator is connected to a cold water supply (not a hot water line).

Catching airflow, water supply, and defrost issues early helps prevent food spoilage, recurring ice and water problems, and heavy frost that can strain the cooling system.

Last updated: January 2026

If your Kenmore Elite 10657705701 side-by-side refrigerator is not making ice, the most common causes are the ice maker being switched OFF, the ice bin or freezer door not seated so the optical shutoff stops production, or a water supply issue. Use the steps in the 10657705701 owner's manual to confirm the ice maker ON/OFF position and bin installation.

• Confirm the ice maker switch is ON (some versions have the switch on the top left behind the ice maker cover door; others are on the top right side of the freezer compartment).
• Make sure the freezer door closes fully and nothing is holding it open.
• Reseat the ice storage bin; if the bin is removed or the door is open, the sensor “flipper door” stops ice production.
• Allow time after changes: 24 hours for the first batch and up to 3 days to fill the bin.
• Discard the first three batches after a new hookup or filter change to flush the system.

A restricted water supply can stop ice production or cause small cubes.

• Verify the household shutoff valve is fully open.
• Check the water line behind the refrigerator for kinks or pinches.
• If water flow at the dispenser is weak, replace the water filter and reinstall the filter cap correctly.
• If you suspect the valve is not opening to fill the ice maker, the inlet valve can be the failed part.

Relevant parts for this model include the genuine Kenmore refrigerator water filter EDR3RXD1 and the refrigerator water inlet valve WPW10159839.

The ice maker on model 10657705701 uses an automatic shutoff sensor beam; if the bin is out of position or the door is not fully closed, the refrigerator “thinks” the bin is full and stops making ice even when the ice maker switch is ON.

Last updated: January 2026