How to find Craftsman leaf blower model number?
For a Craftsman gas leaf blower like model 316794610, the model number is printed on the unit’s ID label, most often on the back of the housing, the underside, or near the engine cover. Write the full number exactly as shown so you get the right parts match.
Where to look on the blower
Check these common label locations first:
- Back of the blower housing (near the handle area)
- Bottom or underside of the unit
- Near the recoil starter or engine cover area
- Around the fuel tank area (on the housing, not on the cap)
- On a sticker or metal tag with other engine information
What to write down (so parts match correctly)
Model labels can include letters, numbers, and sometimes dashes. For the best match, record:
- The full model number (example: 316794610)
- Any additional numbers on the same label (serial or date code)
- The brand name (Craftsman)
- Any engine family info printed on the tag (helpful for tune-up parts)
Quick checklist: model number vs. part number
Use this to avoid ordering the wrong item.
| Item you see | What it identifies | Example | When you use it |
|---|---|---|---|
| Model number | The leaf blower model | 316794610 | To find the correct parts list |
| Part number | The replacement part | 753-05784 | To order the exact part |
| Part name | What the part is | Spark plug | To confirm you picked the right item |
Why it matters
Craftsman leaf blowers often share similar housings, but parts like ignition components, fuel system pieces, and gaskets can vary by model. Using the exact model number helps ensure parts like the spark plug 753-05784 fit and perform correctly.
Last updated: February 2026
Who makes Craftsman leaf blowers?
Craftsman is a brand owned by Stanley Black & Decker; Craftsman leaf blowers have been produced by different manufacturers over the years, depending on the model and production run. For Craftsman model 316794610, parts and design commonly align with MTD-built outdoor power equipment, so matching parts by model number is the most reliable way to identify the correct maker and components.
How to tell who built your specific Craftsman blower
Because “Craftsman” is the brand on the housing, the actual manufacturer is best identified by the model number and the parts used.
- Use the full model number 316794610 when shopping parts.
- Compare your blower’s engine and fuel system layout to the parts list.
- If your unit uses MTD-style service parts (fuel tank, gaskets, ignition), it typically indicates MTD manufacturing.
- Match replacement parts by exact description and part number, not by appearance alone.
- Keep your serial number handy if you are confirming production details.
Parts clues for model 316794610
These common service parts for this model are typical of MTD-style small-engine platforms:
| What you’re servicing | Example part on this model | What it suggests |
|---|---|---|
| Ignition tune-up | Spark plug 794-00082 | Standard small-engine maintenance parts |
| Fuel storage | Mtd leaf blower fuel tank assembly 753-05933 | MTD-labeled component naming |
| Air intake | Leaf blower air filter assembly 753-04223 | Common MTD/Craftsman service layout |
Why it matters
Knowing the brand owner is helpful, but knowing the actual build platform is what gets repairs done right. Manufacturer differences affect carburetor gaskets, ignition parts, fuel caps, and even fasteners, so using the model-specific parts list prevents wrong-part returns and repeat repairs.
Last updated: February 2026
Why does my 2 stroke leaf blower run for a few minutes then dies?
On the Craftsman 316794610 gas leaf blower, “runs a few minutes then dies” is most often caused by restricted fuel flow, a non-venting fuel cap, a dirty air intake, or ignition breakdown as the engine warms. This model uses straight unleaded gasoline (no oil mix), so start with fresh fuel and basic airflow and spark checks.
Quick checks (fastest fixes first)
- Dump old fuel and refill with fresh unleaded gasoline from a clean container.
- Loosen the fuel cap and run the blower briefly; if it stays running, the cap vent is plugged.
- Inspect the air filter; replace it if it is dirty, torn, or oil-soaked.
- Check the spark plug condition and gap; replace if fouled, wet, or worn.
- Look for cracked fuel lines or a loose carb mounting that can cause an air leak.
Parts that commonly fix “runs then dies”
- Spark plug 753-05784
- Leaf blower air filter assembly 753-04223
- Lawn & garden equipment engine fuel tank cap 753-05289
- Leaf blower carburetor gasket 753-05905
Symptom-to-cause guide
| What you notice | Most likely cause | What to do next |
|---|---|---|
| Dies after 1 to 5 minutes, restarts after sitting | Fuel cap not venting | Test with cap loosened; replace cap if vent is restricted |
| Dies when you open the throttle | Fuel restriction or air leak | Check fuel lines, tank pickup, and carb gasket/seal |
| Runs rough, plug turns black | Restricted air flow or rich running | Replace air filter; confirm choke is fully off |
| Dies hot, then won’t restart right away | Ignition weakening when warm | Replace spark plug; inspect lead wire and coil connections |
Why it matters
Small engines need steady fuel delivery and proper tank venting. When fuel flow drops or the tank cannot vent, the mixture goes lean and the engine stalls. A restricted air filter or weak spark can create the same “runs then dies” symptom.
Last updated: February 2026
