$19.56 |
9% OFF Phone Price : $21.56
CONFIRM THE PART FITS
Part Information
This fuel tank assembly (part number 753-05933) is for leaf blowers.
Fuel tank assembly 753-05933 holds fuel. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Drain the gas tank into an approved storage container in a well-ventilated area before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $21.16 |19% OFF Phone Price : $26.16
- $74.45 |17% OFF MSRP : $90.00
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #316794831 Craftsman gas leaf blower | 316794831 | Impeller/fuel tank/tubes |
| Model #41CS4ESG799 MTD gas leaf blower | 41CS4ESG799 | Impeller/fuel tank/engine cover |
| Model #41AS4SCG799 MTD gas leaf blower | 41AS4SCG799 | Fuel tank/impeller/tubes |
| Model #41BS4SCG799 MTD gas leaf blower | 41BS4SCG799 | Impeller/fuel tank/tubes |
| Model #41AS4ESG099 MTD gas leaf blower | 41AS4ESG099 | Impeller/tubes |
| Model #316794711 Craftsman gas leaf blower | 316794711 | Impeller/tubes |
| Model #316794611 Craftsman gas leaf blower | 316794611 | Impeller/fuel tank/engine cover |
| Model #41AS4ESG799 MTD gas leaf blower | 41AS4ESG799 | Impeller/fuel tank |
| Model #316794610 Craftsman gas leaf blower | 316794610 | Impeller/tubes/fuel tank |
| Model #41BS4ESG799 MTD gas leaf blower | 41BS4ESG799 | Impeller/tubes/fuel tank |
Reviews
Fuel Tank Assembly Part Worked!
I have a 8 year old Craftsman 4 cycle blower that has worked like a champ until the fuel line broke. I tried replacing the line itself without success so I order the fuel tank assembly. Took 15 minutes to take all apart and put back together. I do wish the original blower had better details so I could iD which intake was for the primer. I did guess right. Now I hope I can get several more years out of the blower.
RobM, The Woodlands, Tx
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Pretty Easy To Install
The fuel tank with pre-installed fuel lines is pretty easy to install. There are only two screws that hold the tank in place - one is easily accessible and the other is not at all accessible. As such, you have to remove 8 or 10 screws in order to remove two shroud pieces that then allows access to the second tank screw. So, it takes longer to remove and reinstall the two shroud pieces than it does to remove the old tank and install the new tank, but it's a compact design and not really a big deal. I did note that the pre-installed fuel lines were in a reverse configuration from my original tank assembly, which means you have to criss-cross the fuel feed and fuel return lines before attaching them to the carburetor. Again, not a big deal, but a little different from the original. Also, there were no installation instructions with the tank assembly, but replacement is pretty intuitive.
John M, Chicagoland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour