Craftsman 247204182 zero-turn riding lawn mower Parts

To identify the engine on your Craftsman riding mower model 247204182, locate the engine’s ID label or stamped numbers on the engine itself (not on the mower deck). The most reliable identifiers are the engine model, type, and code/serial; use the 247204182 owner's manual to confirm where your mower’s engine ID is typically shown.

Where to look on the engine

Check these common locations first (clean the area so the numbers are readable):

• On the blower housing/shroud near the muffler or spark plug
• On the valve cover or near the air cleaner housing
• On a sticker/foil label on the engine shroud
• Stamped into metal on the front or side of the engine block
• Near the starter or flywheel area

What numbers you need (and what they mean)

When you find the label, write the numbers exactly as shown.

What you see on the engine	What it’s used for	Example format (varies by maker)
Model	Identifies the engine family	“12Q902” or similar
Type / Spec	Identifies the exact build configuration	“0112” or similar
Code / Serial	Identifies production date/sequence	Longer numeric string

Quick tips to avoid mix-ups

These details help ensure you match the right parts (like belts, switches, and electrical items) to the correct engine setup:

• Use the engine numbers, not the mower model number, when shopping engine-specific parts
• If the label is missing, look for stamped numbers on the engine block
• Take a clear photo before ordering parts
• If the mower will not crank, confirm safety switches and wiring before assuming an engine issue
• For electrical testing, follow safe meter practices from how to use a multimeter to test electrical parts video

Why it matters

The same Craftsman mower model can be built with different engine versions over time. The engine model and type/spec determine the correct tune-up parts (spark plug, air filter), fuel system parts, and some starting/charging components.

Last updated: January 2026

Yes. Replacing the engine on your Craftsman rear-engine riding mower model 247204182 is worth it when the deck, frame, steering, and drive system are in good condition and the total swap cost stays well below the cost of a comparable new rear-engine rider.

Quick decision checklist

• The mower drives and steers normally (the main problem is engine-related).
• The mower deck is structurally solid (not rusted through) and the spindles and pulleys turn smoothly.
• The drive system is healthy (no persistent slipping, grinding, or loss of drive).
• You can match the replacement engine’s crankshaft size, mounting pattern, and wiring.
• You are comfortable with a moderate DIY project or paying for labor.

Cost and effort: what to compare

Compare the full job cost, not just the engine price.

Option	Typical cost level	Time/effort	Best when
Tune-up/repair (carburetor, fuel system, ignition)	Low	Low to moderate	The engine has good compression and the issue is starting or running quality
Replace with a complete engine	Moderate to high	Moderate	You want the most reliable “fresh start”
Replace with a short block	Moderate	High	You want to reuse accessories and keep costs down
Replace the mower	High	Low	Multiple major systems are worn (engine plus deck and drive)

Parts that commonly get attention during an engine swap

Even with a new engine, these items often determine whether the mower feels “fixed” afterward:

• Drive belt condition and routing (a worn belt can slip and feel like low power): lawn tractor ground drive belt 954-04317A
• No-crank or intermittent starting issues: lawn tractor starter solenoid 725-06153
• Random stalling or no-crank tied to operator presence and PTO safety circuits: lawn tractor interlock switch 725-04363

Why it matters

A rear-engine riding mower like the Craftsman 247204182 is a strong candidate for an engine replacement because the chassis and deck often outlast the engine. Making the decision based on total cost and overall condition prevents spending engine money on a mower that also needs major deck or drive repairs.

For model-specific safety steps, wiring notes, and adjustment procedures, follow the 247204182 manual.

Last updated: January 2026

For the Craftsman 247204182 rear-engine riding mower, the most commonly replaced items are routine-wear parts (belts, blades, and deck hardware) plus a few electrical and safety components that affect starting and blade engagement. Use the diagrams in the 247204182 owner's manual to match your deck and drive configuration before ordering.

Commonly replaced parts for this model

These are the parts we see customers replace most often on riding mowers like the 247204182, and several are available for this model:

• Mower blade (dull, bent, or causing vibration): Craftsman lawn tractor 46-in deck premium 2-in-1 blade 942-04244A
• Ground drive belt (slipping, no/weak movement): lawn tractor ground drive belt, 9/16 x 67-1/2-in 954-04317A
• Electric clutch (PTO) (blades will not engage): lawn tractor electric clutch 917-05209
• Starter solenoid (clicks but won’t crank, intermittent no-start): lawn tractor starter solenoid 725-06153
• Interlock switch (no-crank due to safety circuit): lawn tractor interlock switch 725-04363
• Discharge and mulching accessories (bagging/mulching performance): lawn tractor 2-bin bagger assembly 19C70020OEM, lawn tractor mulch kit 19B30005OEM

Quick symptom-to-part guide

What you notice	Most likely area	Parts to check first
Mower won’t move or slips under load	Drive system	Ground drive belt, idlers, transaxle linkage
Blades won’t turn on	PTO system	Electric clutch, wiring, interlock switch
Engine won’t crank	Starting circuit	Battery connections, starter solenoid, interlock switch
Poor cut quality or streaking	Cutting deck	Blade condition, deck level, belt tension

Why these parts wear out first

Belts and blades are consumable parts; they take constant load, heat, and debris impact. Electrical items like a solenoid or interlock switch commonly fail from vibration, moisture, and normal contact wear, and they can stop the mower from starting even when the engine is fine.

Tips to order the right part the first time

• Confirm the full model number is 247204182 on the product label.
• Use the manual diagrams to identify your deck and routing.
• Compare your old part’s number and measurements (belt width and length, blade length and hole pattern).
• Replace worn fasteners (nuts, bolts, cotter pins) when removing deck and linkage hardware.
• If you are unsure between two similar parts, match by diagram location and description, not just appearance.

Last updated: March 2026