Kenmore Elite 10654789803 refrigerator Parts

For Kenmore Elite model 10654789803, the most reliable way to get cubic feet is to look up the capacity listed in the specifications section of the 10654789803 owner's manual. If you need a quick estimate, we recommend measuring the usable interior space and converting cubic inches to cubic feet.

• Check the specs in the manual: capacity is typically listed as total, refrigerator, and freezer volume.
• Use interior measurements for an estimate: measure usable height, width, and depth (ignore door bins and rounded corners).
• Use the model prefix as a clue: Kenmore 106 models are commonly Whirlpool-built; the model number itself usually does not directly encode cubic feet.
• Compare to typical side-by-side sizes: most side-by-side refrigerators fall around 20 to 26 cu. ft. total.

1. Empty enough space to measure the main box (not the door).
2. Measure usable interior dimensions in inches:
   • Height
   • Width
   • Depth
3. Multiply: height x width x depth = cubic inches.
4. Convert: cubic inches ÷ 1728 = cubic feet.

Capacity helps you choose the right replacement accessories and plan storage. For example, water and ice performance is often tied to maintenance items like the genuine Kenmore refrigerator water filter EDR3RXD1, and knowing your refrigerator type and size helps you match the correct filter style and replacement schedule.

We list model-matched replacement parts for 10654789803 on this page (filters, door bins, control boards, defrost parts). If you want to search by model number across more diagrams and categories, use Sears PartsDirect.

Last updated: February 2026

Most Kenmore Elite refrigerators typically last 10 to 15 years with normal household use and basic maintenance. For Kenmore Elite model 10654789803, keeping airflow clear, doors sealing tightly, and the water system maintained helps you reach the upper end of that range; see the 10654789803 owner's manual for care and maintenance details.

A refrigerator’s life depends more on operating conditions and maintenance than the badge on the door.

• 10 to 15 years is the normal lifespan range for modern refrigerators
• Heavy use (large households, frequent door openings) shortens lifespan
• Poor ventilation around the cabinet increases compressor run time
• Dirty condenser areas raise temperatures and stress sealed-system components
• Worn door gaskets cause warm air leaks, frost, and longer run cycles

These are the highest-impact habits for a side-by-side like model 10654789803:

• Keep the toe grille and lower front area clear for airflow
• Clean dust from condenser areas on a regular schedule
• Confirm doors close fully and stay aligned; fix sagging or binding
• Replace the water filter on schedule; use the correct filter for this model (example: genuine Kenmore refrigerator water filter EDR3RXD1)
• Address temperature swings early (warm fridge, soft ice, excess frost)

Use this as a practical rule-of-thumb when the unit is aging.

Knowing the typical lifespan helps you plan for big-ticket repairs (compressor, control board, sealed system) versus routine wear items (filters, bins, gaskets). Staying on top of basics like filtration and airflow reduces strain on the cooling system and helps maintain stable food-safe temperatures.

For replacement parts specific to model 10654789803, we list compatible parts on this model page, and you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Common problems on the Kenmore Elite 10654789803 side-by-side refrigerator include weak or no cooling, frost buildup from defrost issues, water and ice dispenser troubles, unusual fan or compressor noises, and water leaks. Many of these trace back to airflow restrictions, dirty coils, door seal gaps, or a failing defrost component; use the 10654789803 owner's manual troubleshooting section to narrow it down.

• Not cooling or warm temperatures: restricted airflow, dirty condenser coil, evaporator fan issue, or control problem
• Frost or ice buildup in freezer: defrost system failure (heater, thermostat, or control) blocking airflow
• Water leaking or puddles: clogged/iced defrost drain, loose water line, or filter housing seepage
• Ice maker or water dispenser not working well: clogged filter, air in the line, low water pressure, or dispenser/valve issue
• Loud buzzing, clicking, or whirring: normal cycling sounds, fan blade interference, or compressor start components struggling

• Confirm the controls are on and allow 24 hours after a new install or major temperature change for stabilization.
• Make sure doors fully close; clean sticky gaskets with mild soap and warm water.
• Clean the condenser area (toe grille and coil area) so heat can dissipate.
• If water tastes off or flow is slow, replace the filter and flush several gallons.
• If frost is heavy on the back freezer panel, suspect a defrost failure.

Cooling, defrost, and water systems are connected: a defrost failure can choke airflow and mimic a “not cooling” complaint, and a restricted water filter can make the dispenser seem “broken” when it is simply starved for flow.

For step-by-step filter guidance, we use how to replace the water filter in a Kenmore refrigerator. For ordering the exact match parts for your model, we recommend starting with the parts list for 10654789803, or searching by model on Sears PartsDirect.

Last updated: February 2026